Chris Metcalf wrote:
> Dave Korn suggested I try the two addresses in the "To:" line, since the
> binutils recommendation of "regis
...@caldera.com" doesn't seem to be
> working (time-out bounce).
The "caldera.com" domain name -- I'm not sure I'm using
the right terminology here -- expired a while ago. The
right address is regis
...@sco.com for registration of
EM_* and other gABI names.
> We are shipping products using the following magic numbers for our Elf
> headers:
> #define EM_TILE64 0x2506
> #define EM_TILEPRO 0x2507
> You can see a bit more about our products at http://www.tilera.com.
> We are planning to use 0x2508 for our next generation hardware (still in
> the speculative stage).
> Is there a particular process we should go through to get these numbers
> added to the standard Elf headers, etc.? Thanks!
If you wish to register the EM_TILE64 and EM_TILEPRO
names in the gABI, you most likely will not end up
with your current values. There are currently fewer
than 200 registered names, and their values reflect
this (all are below 200).
There's certainly nothing wrong with you using the
values you have for your own internal use, or as
temporary ones.
Will you have any great trouble with these names
ending up with different values when officially
registered?
If not, to register EM_* names, we need 3 things:
- A suggested unique EM_* name (and the ones you've
got are fine),
- A short single-line description of the CPU and/or
architecture, and
- A owner/contact for it.
--
Dave Prosser d...@sco.com (973)261-1407 The SCO Group, Florham Park, NJ
SCO is a leading provider of UNIX-based solutions and mobile services.
|
