remitt server not running

[ALLAN]

Hi,

I'm using freemed on vmware on windows 7. Whenever I open billing functions, i get the message "remitt server not running". How do i get remitt to run?

[Jeff]

If you're running FreeMED 0.8.x (which I would not recommend, it's
quite old at this point), you would install the older REMITT 0.4.x
series from:

https://github.com/freemed/remitt/tree/0.4.x

If you're running FreeMED 0.9.x, grab a copy of REMITT from the
website at http://remitt.org or from github at

https://github.com/freemed/remitt

--
Thanks,
Jeff
(je...@freemedsoftware.org)
FreeMED Software Foundation, Inc
http://freemedsoftware.org/

[Volker Bradley]

Did you download the vmware image of FreeMED?  If so, the proper remitt server is in this image.

Did you start the remitt server as the instructions say?

The instructions say:

72. To start the Remitt Billing system, confirm that the remitt server is running:

 ps ax | grep remitt

You should see:

        24385 ?     S<sl   3:17 /usr/bin/perl /usr/share/remitt/bin/remitt_server.pl -d

73. If the service is not running, then start it again with:

sudo /etc/init.d/remitt start

74. ifconfig

Write down your IP address.  It should look like this:

         inet addr:192.168.78.130

75. Log into FreeMED as administrator.  Configure FreeMED to connect to remitt server by going to:

      Main -> Administration menu -> System configuration -> Remitt billing sytem

76. Fill in the information:

        Remitt Server Hostname:

192.168.78.130    - Actually enter your IP address that you determined with command #74.

Do not enter a trailing slash like this:  192.168.78.139/  

65. Remitt Server Port:

7688

66. Transport Protocol:

https

Let me know if you get remitt running.

Volker

--
You received this message because you are subscribed to the Google Groups "FreeMED Support" group.

To post to this group, send email to freemed...@googlegroups.com.
To unsubscribe from this group, send email to freemed-suppo...@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/freemed-support?hl=en.

[ALLAN]

Thanks volker, it worked!