FPGALink Users

Hi Chris,. I build two fpga link on mega32u4 and fx2, can program altera cpld and fpga, but not

Hi All, After I made few modifications, I have the following error message during compile. what does

Hi I am learning how to make a cypress .hex file from the libfpgalink. my goal is to get a FX2LP

Sorry, My fault, I didn't unzip the files to c:\makestuff. now the command windows works. it is

Hi Everyone, I am so excited to find this group. I am a hardware engineer with limited software

Hi Chris, Can you help in figuring out how can I read the PIN value from Nexys3 board using fpgalink.

Firstly, you're using a very old release. Use the latest release as described in the quickstarts

I assume you've googled and found the results unsatisfactory, so you're going to have to be

I have not done any work to integrate Xilinx PCIe into FPGALink. I do have a proof-of-concept direct-

You could dedicate one channel to providing "data-available" notifications for a group of

It means "copy 16 blocks of 64KiB from /dev/urandom to a file /var/tmp/foo/dat" (see [1]).

Start from a known-good state. Fetch and build the latest release (20170708) and try the appropriate

ryan.kingsbury via FPGALink Users wrote: > Our next move seems clear: to test with a standalone PC

Hi Chris, after some weeks I found the time to dig into the problem: It's not with '

Hi Henry, Thanks for the tip. We will look at Artix-7 for sure. Once again I am in your debt: your

This kind of error usually indicates either a hardware problem or a bug in FPGALink. In detail, the

You already have the build infrastructure installed; it's the thing that builds FPGALink itself

Hi Caleb, That is indeed a confusing error message. My guess (from a brief perusal of the code) is

You do not need to rebuild the firmware in order to use FPGALink. You only need to build the firmware

> i am sorry to keep bothering you > Not at all. If my instructions don't work for you,

Yes, that is certainly the more elegant approach. And probably not that much more HDL to create. I

Dear Chirs, I am trying to install fpgalink in my laptop, which is running windows 8 64-bit. I

Hi Baptiste, Excellent, I'm glad you found it useful! Chris On Fri, Mar 25, 2016 at 1:56 PM,

ouch, thanks for the quick response. I was following an old bookmarked link for the RPi and didn'

> I never did get it work > The time to tell me that was two years ago, when I had a working

Actually I followed them till the line #12 when "msget.sh" gave an error and couldn't

Chris McClelland wrote: > FTDI > I refuse to have anything to do with them, and I advise others

It's all automatic, no need to use fxload. Just follow the Nexys2 quickstart[1] (linked from the

Hi Jenn, I've created a branch of my fx2lib which makes the changes you mention above. See https:

The code in prom.c dates back to late 2008 or so, well before FPGALink existed. So, I don't