Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss

2.6.21-rc4-git6 Console freezes

2 views
Skip to first unread message

Witold Krecicki

unread,
Mar 22, 2007, 3:35:54 PM3/22/07
to linux-...@vger.kernel.org
1. Hardware: HP Pavilion DV6150eu, AMD Turion 64 X2 TL-52, NVidia MCP51
chipset, GeForce Go 7200
2. Problem:
Console 'freezes' in random moments, showing no underscore cursor, nor GPM
mouse cursor, it's not responding on network too. System works perfectly fine
in graphics mode (with propertiary NVidia module loaded, those freezes are
happening with and without it, so it's not the problem). Appeared on earlier
kernels (for sure on 2.6.20-rc6, AFAIR I've tested 2.6.18 too), but it wasn't
so annoying as it usually got to run KDM before freezing (not always) - on
2.6.21-rc4-git6 it has freezed in:

[ 0.000000] Linux version 2.6.21-rc4-git6 (wpk@hippie) (gcc version 4.2.0
20070307 (prerelease) (PLD-Linux)) #2 SMP Thu Mar 22 19:09:09 CET 2007
[ 0.000000] Command line: root=/dev/dm-0 resume2=swap:/dev/dm-0:0xd8098
(...)
[ 12.596158] PCI: Found 0000:00:0d.0 [10de/0265] 000101 00
[ 12.596176] 0000:00:0d.0: cannot adjust BAR0 (not I/O) <- this moment in ~
4/6 boot-ups
[ 12.596234] 0000:00:0d.0: cannot adjust BAR1 (not I/O)
[ 12.596291] 0000:00:0d.0: cannot adjust BAR2 (not I/O) <- and one time here
[ 12.596348] 0000:00:0d.0: cannot adjust BAR3 (not I/O)

After few tries, it boots up perfectly, passing that moment.
Mentioned device is
00:0d.0 IDE interface: nVidia Corporation MCP51 IDE (rev f1)
Though it might not be a problem with the device (as it happened before, in
different moments, on earlier kernels).

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majo...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

0 new messages