Virtual memory error when restarting X
Sitsofe Wheeler
[1]
Virtual memory error when restarting X
[2]
Often after restarting X I see the messages similar to "NV0: still have vm que at nv_close(): 0x4023b000 to 0x40245000" in the logs. I presume that these are being caused by the properitry nvidia drivers that I use with X. However I have also noticed that "Unable to handle kernel paging request at virtual address 6b336b50" and the like have also been turning up. I'm wondering whether the graphics drivers problems could be being caused by a vm problem. The oops that
is enclosed does not appear to be readily repeatable... but leaving X causes sometimes the system to lock solid with only SysRq getting through.
[4] Kernel version
Linux version 2.4.7 (ro...@galvatron.localdomain) (gcc version 2.96 20000731 (Linux-Mandrake 8.0 2.96-0.48mdk)) #1 Sun Aug 5 13:59:44 BST 2001
[5] Output of Oops.. message
ksymoops 2.3.7 on i686 2.4.7. Options used
-V (default)
-k /proc/ksyms (default)
-l /proc/modules (default)
-o /lib/modules/2.4.7/ (default)
-m /boot/System.map-2.4.7 (default)
Warning: You did not tell me where to find symbol information. I will
assume that the log matches the kernel and modules that are running
right now and I'll use the default options above for symbol resolution.
If the current kernel and/or modules do not match the log, you can get
more accurate output by telling me the kernel version and where to find
map, modules, ksyms etc. ksymoops -h explains the options.
Warning (compare_maps): mismatch on symbol scsi_CDs , sr_mod says cfd92fe4, /lib/modules/2.4.7/kernel/drivers/scsi/sr_mod.o says cfd92d40. Ignoring /lib/modules/2.4.7/kernel/drivers/scsi/sr_mod.o entry
Warning (compare_maps): mismatch on symbol proc_scsi , scsi_mod says c8c6077c, /lib/modules/2.4.7/kernel/drivers/scsi/scsi_mod.o says c8c60220. Ignoring /lib/modules/2.4.7/kernel/drivers/scsi/scsi_mod.o entry
Warning (compare_maps): mismatch on symbol scsi_devicelist , scsi_mod says c8c607a8, /lib/modules/2.4.7/kernel/drivers/scsi/scsi_mod.o says c8c6024c. Ignoring /lib/modules/2.4.7/kernel/drivers/scsi/scsi_mod.o entry
Warning (compare_maps): mismatch on symbol scsi_hostlist , scsi_mod says c8c607a4, /lib/modules/2.4.7/kernel/drivers/scsi/scsi_mod.o says c8c60248. Ignoring /lib/modules/2.4.7/kernel/drivers/scsi/scsi_mod.o entry
Warning (compare_maps): mismatch on symbol scsi_hosts , scsi_mod says c8c607ac, /lib/modules/2.4.7/kernel/drivers/scsi/scsi_mod.o says c8c60250. Ignoring /lib/modules/2.4.7/kernel/drivers/scsi/scsi_mod.o entry
Aug 5 14:27:40 galvatron kernel: c01b851c
Aug 5 14:27:40 galvatron kernel: Oops: 0000
Aug 5 14:27:40 galvatron kernel: CPU: 0
Aug 5 14:27:40 galvatron kernel: EIP: 0010:[sock_poll+28/48]
Aug 5 14:27:40 galvatron kernel: EIP: 0010:[<c01b851c>]
Using defaults from ksymoops -t elf32-i386 -a i386
Aug 5 14:27:40 galvatron kernel: EFLAGS: 00013286
Aug 5 14:27:40 galvatron kernel: eax: 6b336b54 ebx: 00000000 ecx: c4dc80c0 edx: c2efc44c
Aug 5 14:27:40 galvatron kernel: esi: c4dc80c0 edi: 00000000 ebp: 00000145 esp: c5c35f20
Aug 5 14:27:40 galvatron kernel: ds: 0018 es: 0018 ss: 0018
Aug 5 14:27:40 galvatron kernel: Process X (pid: 1452, stackpage=c5c35000)
Aug 5 14:27:40 galvatron kernel: Stack: c4dc80c0 c2efc44c c5c35f54 c013ee6b c4dc80c0 c5c35f54 c5c35f54 00000800
Aug 5 14:27:40 galvatron kernel: c5c34000 0000e99e 0000000b c5c35f54 0000000e 00000000 c4001000 00000008
Aug 5 14:27:40 galvatron kernel: 00000000 c2578740 00000000 c013f2dc 00000100 c5c35f90 c5c35f8c c3ce3440
Aug 5 14:27:40 galvatron kernel: Call Trace: [do_select+283/560] [sys_select+812/1152] [system_call+51/56]
Aug 5 14:27:40 galvatron kernel: Call Trace: [<c013ee6b>] [<c013f2dc>] [<c0106cc7>]
Aug 5 14:27:40 galvatron kernel: Code: ff 50 1c 83 c4 0c c3 8d b6 00 00 00 00 8d bc 27 00 00 00 00
>>EIP; c01b851c <sock_poll+1c/30> <=====
Trace; c013ee6b <do_select+11b/230>
Trace; c013f2dc <sys_select+32c/480>
Trace; c0106cc7 <system_call+33/38>
Code; c01b851c <sock_poll+1c/30>
00000000 <_EIP>:
Code; c01b851c <sock_poll+1c/30> <=====
0: ff 50 1c call *0x1c(%eax) <=====
Code; c01b851f <sock_poll+1f/30>
3: 83 c4 0c add $0xc,%esp
Code; c01b8522 <sock_poll+22/30>
6: c3 ret
Code; c01b8523 <sock_poll+23/30>
7: 8d b6 00 00 00 00 lea 0x0(%esi),%esi
Code; c01b8529 <sock_poll+29/30>
d: 8d bc 27 00 00 00 00 lea 0x0(%edi,1),%edi
Aug 5 14:27:40 galvatron kernel: c0141c00
Aug 5 14:27:40 galvatron kernel: Oops: 0000
Aug 5 14:27:40 galvatron kernel: CPU: 0
Aug 5 14:27:40 galvatron kernel: EIP: 0010:[locks_remove_posix+48/128]
Aug 5 14:27:40 galvatron kernel: EIP: 0010:[<c0141c00>]
Aug 5 14:27:40 galvatron kernel: EFLAGS: 00010202
Aug 5 14:27:40 galvatron kernel: eax: 6b336b54 ebx: c2efc3dc ecx: 00000000 edx: 6b336b54
Aug 5 14:27:40 galvatron kernel: esi: c7c41e40 edi: 00000001 ebp: 0000000b esp: c5c35dac
Aug 5 14:27:40 galvatron kernel: ds: 0018 es: 0018 ss: 0018
Aug 5 14:27:40 galvatron kernel: Process X (pid: 1452, stackpage=c5c35000)
Aug 5 14:27:40 galvatron kernel: Stack: c4dc80c0 00000000 c0130beb c4dc80c0 c7c41e40 00000000 c4dc80c0 00000000
Aug 5 14:27:40 galvatron kernel: 00030007 c7c41e40 c01172dc c4dc80c0 c7c41e40 c13f0e00 c5c34000 0000000b
Aug 5 14:27:40 galvatron kernel: 6b336b70 c01178bb c7c41e40 c011511e 00003086 00000001 c0281bc4 00000001
Aug 5 14:27:40 galvatron kernel: Call Trace: [filp_close+75/96] [put_files_struct+76/192] [do_exit+187/480] [printk+366/384] [die+57/80] [do_page_fault+868/1136] [__generic_copy_to_user+48/64]
Aug 5 14:27:40 galvatron kernel: Call Trace: [<c0130beb>] [<c01172dc>] [<c01178bb>] [<c011511e>] [<c01071c9>] [<c0112174>] [<c01f0a10>]
Aug 5 14:27:40 galvatron kernel: [<c01ba291>] [<c01bb09b>] [<c01bb20c>] [<c01ee9d5>] [<c012ba14>] [<c0111e10>] [<c0106db8>] [<c01b851c>]
Aug 5 14:27:40 galvatron kernel: [<c013ee6b>] [<c013f2dc>] [<c0106cc7>]
Aug 5 14:27:40 galvatron kernel: Code: f6 40 2c 01 74 3a 39 70 14 75 35 8b 13 8b 42 28 8b 40 10 85
>>EIP; c0141c00 <locks_remove_posix+30/80> <=====
Trace; c0130beb <filp_close+4b/60>
Trace; c01172dc <put_files_struct+4c/c0>
Trace; c01178bb <do_exit+bb/1e0>
Trace; c011511e <printk+16e/180>
Trace; c01071c9 <die+39/50>
Trace; c0112174 <do_page_fault+364/470>
Trace; c01f0a10 <__generic_copy_to_user+30/40>
Trace; c01ba291 <sock_wfree+21/40>
Trace; c01bb09b <kfree_skbmem+b/60>
Trace; c01bb20c <__kfree_skb+11c/120>
Trace; c01ee9d5 <unix_stream_recvmsg+305/390>
Trace; c012ba14 <__alloc_pages+74/270>
Trace; c0111e10 <do_page_fault+0/470>
Trace; c0106db8 <error_code+34/3c>
Trace; c01b851c <sock_poll+1c/30>
Trace; c013ee6b <do_select+11b/230>
Trace; c013f2dc <sys_select+32c/480>
Trace; c0106cc7 <system_call+33/38>
Code; c0141c00 <locks_remove_posix+30/80>
00000000 <_EIP>:
Code; c0141c00 <locks_remove_posix+30/80> <=====
0: f6 40 2c 01 testb $0x1,0x2c(%eax) <=====
Code; c0141c04 <locks_remove_posix+34/80>
4: 74 3a je 40 <_EIP+0x40> c0141c40 <locks_remove_posix+70/80>
Code; c0141c06 <locks_remove_posix+36/80>
6: 39 70 14 cmp %esi,0x14(%eax)
Code; c0141c09 <locks_remove_posix+39/80>
9: 75 35 jne 40 <_EIP+0x40> c0141c40 <locks_remove_posix+70/80>
Code; c0141c0b <locks_remove_posix+3b/80>
b: 8b 13 mov (%ebx),%edx
Code; c0141c0d <locks_remove_posix+3d/80>
d: 8b 42 28 mov 0x28(%edx),%eax
Code; c0141c10 <locks_remove_posix+40/80>
10: 8b 40 10 mov 0x10(%eax),%eax
Code; c0141c13 <locks_remove_posix+43/80>
13: 85 00 test %eax,(%eax)
Aug 5 14:27:40 galvatron kernel: c0112bb3
Aug 5 14:27:40 galvatron kernel: Oops: 0000
Aug 5 14:27:40 galvatron kernel: CPU: 0
Aug 5 14:27:40 galvatron kernel: EIP: 0010:[__wake_up+51/160]
Aug 5 14:27:40 galvatron kernel: EIP: 0010:[<c0112bb3>]
Aug 5 14:27:40 galvatron kernel: EFLAGS: 00010897
Aug 5 14:27:40 galvatron kernel: eax: c2efc468 ebx: 6b336b54 ecx: 00000000 edx: c2efc46c
Aug 5 14:27:40 galvatron kernel: esi: c1226140 edi: 6b336b4c ebp: c5acbe10 esp: c5acbdf4
Aug 5 14:27:40 galvatron kernel: ds: 0018 es: 0018 ss: 0018
Aug 5 14:27:40 galvatron kernel: Process kdm (pid: 2012, stackpage=c5acb000)
Aug 5 14:27:40 galvatron kernel: Stack: c2efc46c 00000000 00000282 00000001 c319eb00 c1226140 c319e7c0 00000000
Aug 5 14:27:40 galvatron kernel: c01ecd5f c319eb00 00000001 00000000 00000000 c0120d94 c105ee1c 00000008
Aug 5 14:27:40 galvatron kernel: c352eb4c c1226140 c352ea40 c3debac0 c01ed06f c319e7c0 00000000 c01b8070
Aug 5 14:27:40 galvatron kernel: Call Trace: [unix_release_sock+207/448] [zap_page_range+420/592] [unix_release+31/48] [sock_release+16/80] [sock_close+47/64] [fput+57/192] [filp_close+82/96]
Aug 5 14:27:40 galvatron kernel: Call Trace: [<c01ecd5f>] [<c0120d94>] [<c01ed06f>] [<c01b8070>] [<c01b858f>] [<c0131aa9>] [<c0130bf2>]
Aug 5 14:27:40 galvatron kernel: [<c01172dc>] [<c01178bb>] [<c011c66b>] [<c0106b73>] [<c0112a44>] [<c0117db6>] [<c0106d00>]
Aug 5 14:27:40 galvatron kernel: Code: 8b 4f 04 8b 1b 8b 01 85 45 f0 74 4f 31 c0 9c 5e fa c7 01 00
>>EIP; c0112bb3 <__wake_up+33/a0> <=====
Trace; c01ecd5f <unix_release_sock+cf/1c0>
Trace; c0120d94 <zap_page_range+1a4/250>
Trace; c01ed06f <unix_release+1f/30>
Trace; c01b8070 <sock_release+10/50>
Trace; c01b858f <sock_close+2f/40>
Trace; c0131aa9 <fput+39/c0>
Trace; c0130bf2 <filp_close+52/60>
Trace; c01172dc <put_files_struct+4c/c0>
Trace; c01178bb <do_exit+bb/1e0>
Trace; c011c66b <dequeue_signal+6b/b0>
Trace; c0106b73 <do_signal+223/28c>
Trace; c0112a44 <schedule+254/390>
Trace; c0117db6 <sys_wait4+396/3a0>
Trace; c0106d00 <signal_return+14/18>
Code; c0112bb3 <__wake_up+33/a0>
00000000 <_EIP>:
Code; c0112bb3 <__wake_up+33/a0> <=====
0: 8b 4f 04 mov 0x4(%edi),%ecx <=====
Code; c0112bb6 <__wake_up+36/a0>
3: 8b 1b mov (%ebx),%ebx
Code; c0112bb8 <__wake_up+38/a0>
5: 8b 01 mov (%ecx),%eax
Code; c0112bba <__wake_up+3a/a0>
7: 85 45 f0 test %eax,0xfffffff0(%ebp)
Code; c0112bbd <__wake_up+3d/a0>
a: 74 4f je 5b <_EIP+0x5b> c0112c0e <__wake_up+8e/a0>
Code; c0112bbf <__wake_up+3f/a0>
c: 31 c0 xor %eax,%eax
Code; c0112bc1 <__wake_up+41/a0>
e: 9c pushf
Code; c0112bc2 <__wake_up+42/a0>
f: 5e pop %esi
Code; c0112bc3 <__wake_up+43/a0>
10: fa cli
Code; c0112bc4 <__wake_up+44/a0>
11: c7 01 00 00 00 00 movl $0x0,(%ecx)
6 warnings issued. Results may not be reliable.
[7.1] Software
Linux galvatron.localdomain 2.4.7 #1 Sun Aug 5 13:59:44 BST 2001 i686 unknown
Gnu C 2.96
Gnu make 3.79.1
binutils 2.10.1.0.2
util-linux 2.10s
mount 2.11b
modutils 2.4.3
e2fsprogs 1.19
PPP 2.4.0
Linux C Library 2.2.2
Dynamic linker (ldd) 2.2.2
Procps 2.0.7
Net-tools 1.59
Console-tools 0.2.3
Sh-utils 2.0
Modules Loaded sr_mod isofs NVdriver emu10k1 ac97_codec soundcore ne2k-pci 8390 ipt_REJECT ipt_limit ipt_state ipt_LOG ip_conntrack_ftp iptable_mangle ide-scsi scsi_mod ide-cd cdrom iptable_filter ipt_MASQUERADE iptable_nat ip_tables ip_conntrack nls_iso8859-1 nls_cp850 vfat fat
[7.2] Processor information
processor : 0
vendor_id : AuthenticAMD
cpu family : 6
model : 4
model name : AMD Athlon(tm) Processor
stepping : 2
cpu MHz : 850.047
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 mmx fxsr syscall mmxext 3dnowext 3dnow
bogomips : 1697.38
[7.3] Module information
sr_mod 12512 1 (autoclean)
isofs 18176 1 (autoclean)
NVdriver 630608 12 (autoclean)
emu10k1 48416 0
ac97_codec 8496 0 [emu10k1]
soundcore 4080 4 [emu10k1]
ne2k-pci 5408 1 (autoclean)
8390 6288 0 (autoclean) [ne2k-pci]
ipt_REJECT 3232 2 (autoclean)
ipt_limit 1296 11 (autoclean)
ipt_state 960 13 (autoclean)
ipt_LOG 3696 11
ip_conntrack_ftp 3792 0 (unused)
iptable_mangle 2048 0 (autoclean) (unused)
ide-scsi 8048 1
scsi_mod 55232 2 [sr_mod ide-scsi]
ide-cd 26448 0
cdrom 27552 0 [sr_mod ide-cd]
iptable_filter 2016 0 (autoclean) (unused)
ipt_MASQUERADE 1584 1 (autoclean)
iptable_nat 16080 0 [ipt_MASQUERADE]
ip_tables 11008 10 [ipt_REJECT ipt_limit ipt_state ipt_LOG iptable_mangle iptable_filter ipt_MASQUERADE iptable_nat]
ip_conntrack 15392 3 [ipt_state ip_conntrack_ftp ipt_MASQUERADE iptable_nat]
nls_iso8859-1 2864 2 (autoclean)
nls_cp850 3616 1 (autoclean)
vfat 9424 1 (autoclean)
fat 32032 0 (autoclean) [vfat]
[7.4] Loaded driver and hardware information
00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000f0000-000fffff : System ROM
00100000-07feffff : System RAM
00100000-001f57ab : Kernel code
001f57ac-00242fb3 : Kernel data
07ff0000-07ff7fff : ACPI Tables
07ff8000-07ffffff : ACPI Non-volatile Storage
cdc00000-ddcfffff : PCI Bus #01
d0000000-d7ffffff : nVidia Corporation GeForce 256 DDR
d0000000-d03fffff : vesafb
dde00000-dfefffff : PCI Bus #01
de000000-deffffff : nVidia Corporation GeForce 256 DDR
e0000000-e3ffffff : VIA Technologies, Inc. VT8363/8365 [KT133/KM133]
ffff0000-ffffffff : reserved
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
0376-0376 : ide1
03c0-03df : vesafb
03f6-03f6 : ide0
0400-040f : VIA Technologies, Inc. VT82C686 [Apollo Super ACPI]
0800-08ff : VIA Technologies, Inc. VT82C686 [Apollo Super ACPI]
0c00-0c7f : VIA Technologies, Inc. VT82C686 [Apollo Super ACPI]
0cf8-0cff : PCI conf1
a000-afff : PCI Bus #01
cc00-cc1f : Realtek Semiconductor Co., Ltd. RTL-8029(AS)
cc00-cc1f : ne2k-pci
d000-d01f : Creative Labs SB Live! EMU10000
d000-d01f : EMU10K1
d400-d41f : VIA Technologies, Inc. UHCI USB
d800-d81f : VIA Technologies, Inc. UHCI USB (#2)
dc00-dc07 : Creative Labs SB Live!
ffa0-ffaf : VIA Technologies, Inc. Bus Master IDE
ffa0-ffa7 : ide0
ffa8-ffaf : ide1
[7.5] PCI information
00:00.0 Host bridge: VIA Technologies, Inc.: Unknown device 0305 (rev 02)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 8
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=64M]
Capabilities: [a0] AGP version 2.0
Status: RQ=31 SBA+ 64bit- FW+ Rate=x1,x2
Command: RQ=0 SBA- AGP+ 64bit- FW- Rate=<none>
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:01.0 PCI bridge: VIA Technologies, Inc.: Unknown device 8305 (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: dde00000-dfefffff
Prefetchable memory behind bridge: cdc00000-ddcfffff
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super] (rev 22)
Subsystem: VIA Technologies, Inc. VT82C686/A PCI to ISA Bridge
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:07.1 IDE interface: VIA Technologies, Inc. VT82C586 IDE [Apollo] (rev 10) (prog-if 8a [Master SecP PriP])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Region 4: I/O ports at ffa0 [size=16]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:07.2 USB Controller: VIA Technologies, Inc. VT82C586B USB (rev 10) (prog-if 00 [UHCI])
Subsystem: Unknown device 0925:1234
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64, cache line size 08
Interrupt: pin D routed to IRQ 10
Region 4: I/O ports at d400 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:07.3 USB Controller: VIA Technologies, Inc. VT82C586B USB (rev 10) (prog-if 00 [UHCI])
Subsystem: Unknown device 0925:1234
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64, cache line size 08
Interrupt: pin D routed to IRQ 10
Region 4: I/O ports at d800 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:07.4 SMBus: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 30)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Capabilities: [68] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0a.0 Multimedia audio controller: Creative Labs SB Live! EMU10000 (rev 07)
Subsystem: Creative Labs CT4832 SBLive! Value
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (500ns min, 5000ns max)
Interrupt: pin A routed to IRQ 9
Region 0: I/O ports at d000 [size=32]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0a.1 Input device controller: Creative Labs SB Live! (rev 07)
Subsystem: Creative Labs Gameport Joystick
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Region 0: I/O ports at dc00 [size=8]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0f.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8029(AS)
Subsystem: Realtek Semiconductor Co., Ltd. RT8029(AS)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at cc00 [size=32]
01:00.0 VGA compatible controller: nVidia Corporation GeForce 256 DDR (rev 10) (prog-if 00 [VGA])
Subsystem: Creative Labs CT6971 GeForce 256 DDR
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 248 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at de000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d0000000 (32-bit, prefetchable) [size=128M]
Expansion ROM at dfef0000 [disabled] [size=64K]
Capabilities: [60] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [44] AGP version 2.0
Status: RQ=31 SBA- 64bit- FW+ Rate=x1,x2
Command: RQ=31 SBA- AGP+ 64bit- FW- Rate=<none>
[7.6] SCSI information
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: RICOH Model: DVD/CDRW MP9060 Rev: 1.90
Type: CD-ROM ANSI SCSI revision: 02
------------------------------------------------------------
--== Sent via Deja.com ==--
http://www.deja.com/
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majo...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Alan Cox
> is enclosed does not appear to be readily repeatable... but leaving X causes sometimes the system to lock solid with only SysRq getting through.
Talk to Nvidia. Its their obfuscated/binary driver set, nobody else can help
you fix it.
Alan