ezLCD+ Support Group

I'm guessing not. I tried http://www.ezlcd.com/files/Favr32_USB_ia64.exe but get a message saying

I am using an ezLCD+101 with firmware v2.2c released in early 2009. Are there any new firmware

I have been programming the ezLCD+103 via SD card for some time. I tried to load the example program

Hi Randy is there any format of the .ezf file generated by the ezlcdrom? I want to customize the

I want to calibrate the touchscreen software, what is the instruction? Thanks!

Is it possible? I have a complex GUI and would love to be able to dedicate one draw frame to each GUI

They were created with the tool from the ezLCD-004, ezLCD004flash at ezLCD.com. It will not let you

My problem has been resolved. It was the loader program version. I was told upper and lowercase in

Can I use all four SPI pins as digital inputs? This would make a total of 5 digital inputs which is

I recently switched from using the 102 to the 105 and my code still seams to work with the exception

What is the actual exit request signal and can it be received through the RS232 port as an external

I really need to know the answers to the last few questions: How do I order 105 with the optional

Thanks Daniel Fowler On Feb 26, 10:58 am, Exlr8 <halbane2...@yahoo.com> wrote: > Daniel,

I believe that the CAN functions are unimplemented, at least as far as the +102 summer or 2009. I am

I could be totally wrong, as I had not known anything about modbus until I looked it up on Wikipedia

Hello, You could connect the device to the computer via a serial cable and use this library to send

Not sure it helps but the power suply provided with my ezLCD+102 (same as 101 with bigger screen) was

Hi Randy, As we have completed our project using ezLCD-101 and its working well with numerous screens

Is there a workaround to access the restricted addresses 80-87 for the ezLCD+103? I have an

I founf the drawings, but not really any documentation for it. Can the ATMEGA164 chip be programed or

Never mind, I found it. On Nov 2, 6:46 am, Jassper <g...@royalephoenix.com> wrote: > I just

The Lua language has a "require" directive, which loads another lua script in place. But

Thanks again, I received the brackets a while ago but I forgot to mention it. I noticed that there

My program has two main screens. The first screen consists of a single full screen button (640x480).

Never mind, I should have paid more attention to the Rs232Open() function argument description.

Thanks On Jul 8, 2:48 pm, lcdking <RandyScha...@gmail.com> wrote: > ezLCD+102 uses all the

Has anyone had trouble with the ezLCD suddenly locking up or freezing (ie, no longer responding to

Hi Pete, I think your observation is correct right now. I believe for now only external commands can

I recently worked on a large project for my employer replacing a 5.4" monochome 320x240

You will have to have a C compiler for matlab and then you can put the C code on your device. Some of