Sanding Curves Tips

[Robin Kirchoff]

Hi Everyone,   I am learning how to repair some dents on my wagon.  I did some dent pulling which was a ton of fun and then we used some filler.  I had one evening of supervision with sanding and then was left on my own tonight.  I made some mistakes but learned a lot.    Mostly I learned there are a lot of curves on a valiant.  It is hard to use a normal size block (width) with out getting to metal on one of the curves.  Any tips out there? Thank you Robin

[sh...@bluewin.ch]

Hi Robin,pros use a tough sponge instead of the block. So you reach any curves . Hope that helps. Regards  Fred  / 1960 Valiant

----Ursprüngliche Nachricht----
Von: doubl...@yahoo.com
Datum: 11.05.2012 05:26
An: <evbc...@googlegroups.com>
Betreff: [EVBC] Sanding Curves Tips

--
You received this message because you are subscribed to the Google Groups "The Early Valiant & Barracuda Club" group.
To post to this group, send email to evbc...@googlegroups.com.
To unsubscribe from this group, send email to evbc-list+...@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/evbc-list?hl=en.

[MARK DUBROCK]

use a longboard. 45 Degree strokes (left-right, right to left) w/block parralell to ground 

---

Date: Thu, 10 May 2012 20:26:27 -0700
From: doubl...@yahoo.com
Subject: [EVBC] Sanding Curves Tips
To: evbc...@googlegroups.com

[moj...@charter.net]

The third one from the top is round:

http://www.tcpglobal.com/AutoBodyDepot/ItemDetail.aspx?ItemNo=DBL+AF44A&gclid=CMzgtpuz-a8CFYuc7Qod23yFhA

Any auto paint store will have them individually or roll bar padding ooor water pipe insulation ooooooooooooor a swimming noodle (you know the long dense round foam floats that you can wrap around yourself).

Jack

 

From: Robin Kirchoff

Sent: Thursday, May 10, 2012 11:26 PM

To: evbc...@googlegroups.com

Subject: [EVBC] Sanding Curves Tips

 

[Robin Kirchoff]

Great thanks everyone!
 

Thank you

Robin

---

From: "moj...@charter.net" <moj...@charter.net>
To: evbc...@googlegroups.com
Sent: Fri, May 11, 2012 4:44:25 PM
Subject: Re: [EVBC] Sanding Curves Tips