+d support? seriously!

[rogerjowett]

http://www.youtube.com/watch?v=HPGymRjoEik

does that mean i can do this with your emulator?
when you say interface1 you don't mean it allows networking does it?
how? physical virtual?
it wont support the sam coupe at all
we only have sim coupe - no tap tzx or rzx support
ascd
no rzx and doesn't bother to accelerate sams 6mhz processor to 6mhz
when using external ram above 32768 as the internal 256/512kb of ram
is all under the contention of the asic during screen$ display -
although in modes 2-4 you can turn the screen off using the border
port - although this is not possible in mode 1 spectrum compatible
mode you could just alter the screen mode and leave the screen bit set
and this would loose the asic contention which clutters up the border
zone according to Simon Owens site:
simonowen.com/sam/articles/mode1/

i cant get the link to work help!

if you are pc programmers then could you help ask lcd to add hmpr bit
5&6 support to his pc program called bmp2scr as with mode 3 interlaced
support it would make sam look like what she was shitloadds better
than the frikking 16 bit shite from commodore and atari that
unfortunately managed to persuade tons of dedicated speccy users to
abandon speccy in favour of £24.95 oh dear we forgot it had a blitter
software

if it does have +d support then SNApshot as many 48k SNApshot files as
possible onto an mgt disc
if you run sim coupe with external ram and boot masterdos and then
boot the snapper disc from velesoft site they should run after
pressing option two on the snapper menu at 6mhz code above 32768 sits
in external ram 1-4mb i have no videos as yet but am trying
desperately trying desperately pc droolz

[fms]

On May 10, 2:15 pm, rogerjowett <rogerjow...@gmail.com> wrote:
> http://www.youtube.com/watch?v=HPGymRjoEik
> does that mean i can do this with your emulator?

I do not know. Try it. You may want to start with the Windows version
though:

http://fms.komkon.org/Speccy/

> when you say interface1 you don't mean it allows networking does it?

No, it does not allow networking, at least not yet.

> it wont support the sam coupe at all

Speccy may support some of the Sam Coupe extended features but not, it
does not emulate the complete Sam Coupe. Speccy is a ZX Spectrum
emulator after all.

> if it does have +d support then SNApshot as many 48k SNApshot files as
> possible onto an mgt disc
> if you run sim coupe with external ram and boot masterdos and then
> boot the snapper disc from velesoft site they should run after
> pressing option two on the snapper menu at 6mhz code above 32768 sits
> in external ram 1-4mb i have no videos as yet but am trying
> desperately trying desperately pc droolz

I do not quite understand what you want me to do in this paragraph.
You might want to express your questions more clearly, then I should
be able to answer them better.

[rogerjowett]

theres a disc on the vele soft site here:

http://velesoft.speccy.cz/samcoupe/snaper/snaper-2010-v0_3.zip

if you have a go with sim coupe the sam coupe emulator and choose
external ram 1-4mb and reset then boot masterdos
now boot the snapper disc then option two on the menu
now you can cat the snapper disc or insert any of your own 48k
SNApshot discs
copde is bunged into external ram where 32768 and runs at 6mhz unless
you understand how to add two line interrupts and turn the screen on/
off

is that more clearly enough?

[Roger Jowett]

http://www.youtube.com/watch?v=EmwW_6kUdHw

[fms]

On Tuesday, July 31, 2012 12:58:39 AM UTC+4, Roger Jowett wrote:

http://www.youtube.com/watch?v=EmwW_6kUdHw

It says "This video has been removed because its content violated YouTube's Terms of Service."