Below is the list of stations that participated in the FreeDV 40M Tuesday Night Activity Net that met

Hi, New release published v2.10.3.21, with focus on getting a glipse in RADEV2 protocol decoder, also

This appears to be resolved with 2.3.1 - Xiegu G90 via FLRig v146 as rig for Hamlib (later versions

Hi all, Just your annual reminder that the ARRL Field Day event is this weekend. This makes the usual

A terrific net this morning on 40m here in VK3. We had stations in VK2, VK3, VK5 and VK7. Stations

Mooneer, I would like to add that for 40M, 7197 kHz would be preferable on the US West Coast due to

Howdy Dana from near to the bottom of the known world! I'm in ZL land for the next couple of

Below is the list of stations that participated in the FreeDV 40M Tuesday Night Activity Net that met

Hi all, Same here in NSW Australia, all field stations have on 6m, 2m and 70cm SSB and HORIZONTAL

I've been trying it most of the day, No errors on start up! It powers the radio on at "Start

Thanks Mooner, will try. On Thu, 11 Jun 2026 at 1:59 PM, Mooneer Salem <moo...@gmail.com>

Yep, it will be able to be disabled if desired as well as the timeout modified. The relevant setting

Super helpful Barry, thanks! I was just selecting a station in FreeDV Reporter but I'll try the

Well that's interesting .....it's now working, on chrome, ddg and FreeDV reporter. Not sure I

Oh and you asked about RF gain, well on my rig it's set to 1, the lowest setting because

40m in the PNW pretty much sucks during the day. It gets better later in the afternoon 75m is good in

Below is the list of stations that participated in the FreeDV 40M Tuesday Night Activity Net that met

I installed FreeDV and after installing FreeDV, the FT-991A and the micro KEYER II I tested this

Hi Peter, THANKS that looks like s solution. Much appreciated. Cheers Daryl Hooke VK3AWA/KK9AWA

Neal, I found a little more info (below) on the TTL logic voltage levels FTDI level converting USB-RS

Hi all, I was made aware today that there is a net close to the FreeDV calling frequency of 14.236

Stan, It's very simple and you have total control here Just go to "My membership settings

Let me specifically address "PTT" issue. FreeDV cannot activate PTT with the IC-M802 (and I

Thank you!!! Warmly, Jason This e-mail may contain material that is confidential or private and

Clearly a good reason to always READ the release notes!!! On Friday, May 22, 2026 at 11:43:58 AM UTC-

Linux doesn't have anywhere near the problems that Winblows has because all the driver support is

To clarify, Windows will ask to run the installer as Administrator as that's needed to write to C

Never thought the computer was part of the problem. Rebooted the computer and all the issues went

Hi Scott, By default the FreeDV tuning line is set to 1.5 kHz. FreeDV is able to deviate a little bit

Mooneer, you asked: "Would you say that 13f8 is worse than 9520 was? Or about the same?"