digitalvoice

With 2.3.0 anyway, some parameters get transferred to KLOG upon pressing the Log QSO button, but

I am on Microsoft. I was able to get it to work by deleting the FreeDV program and reloading it. That

Well that's interesting .....it's now working, on chrome, ddg and FreeDV reporter. Not sure I

Oh and you asked about RF gain, well on my rig it's set to 1, the lowest setting because

Anyone else out there in Radio-Land using either an ICOM IC-M802 or IC-803? On Tuesday, June 2, 2026

40m in the PNW pretty much sucks during the day. It gets better later in the afternoon 75m is good in

Below is the list of stations that participated in the FreeDV 40M Tuesday Night Activity Net that met

I installed FreeDV and after installing FreeDV, the FT-991A and the micro KEYER II I tested this

Hi Peter, THANKS that looks like s solution. Much appreciated. Cheers Daryl Hooke VK3AWA/KK9AWA

Neal, I found a little more info (below) on the TTL logic voltage levels FTDI level converting USB-RS

Hi, New release published v2.10.3.20, with focus on concurrent dual RADE receive or with one receiver

Hi all, I was made aware today that there is a net close to the FreeDV calling frequency of 14.236

Stan, It's very simple and you have total control here Just go to "My membership settings

Let me specifically address "PTT" issue. FreeDV cannot activate PTT with the IC-M802 (and I

Thank you!!! Warmly, Jason This e-mail may contain material that is confidential or private and

Clearly a good reason to always READ the release notes!!! On Friday, May 22, 2026 at 11:43:58 AM UTC-

Linux doesn't have anywhere near the problems that Winblows has because all the driver support is

To clarify, Windows will ask to run the installer as Administrator as that's needed to write to C

Never thought the computer was part of the problem. Rebooted the computer and all the issues went

Hi Scott, By default the FreeDV tuning line is set to 1.5 kHz. FreeDV is able to deviate a little bit

Mooneer, you asked: "Would you say that 13f8 is worse than 9520 was? Or about the same?"

Fred's note reminded me that I had not updated everyone on last week's FreeDV check-ins ..

All, Many thanks to Dudley, WA5QPZ, for running the net last week in my absence. I will be back to

Thanks both. The Log4OM forum has a note about this - there's a setting in CAT Control to set the

Thanks Mooneer, you have done your bit, I'm no guru programmer, I need the ka9q-web developer to

To add to this--if you turn on the debugging console by going to Tools ->Options->Debugging,

Hi all, This is a reminder that this month's FreeDV Activity Day is this coming weekend. (As a

Hi all, Sorry for the late notice but just wanted to give a heads up that FreeDV is at Dayton

Don't forget the FreeDV Net tonight on 7182 . Starts at 9 PM Eastern time, but sign in early ,

See you tomorrow, Tuesday, May 12 th (not May 5th). Fred N3FL From: Fred Larrick <fred.larrick@