DataRecoveryCertification

Hi, I had a chance to test R5 on this pcb today. Probes touching : 0.16 ohms R5 : 0.67 ohms This one

I'm confused as to why someone would resolder the ROM on a PCB with a damaged motor controller.

Should be able to assist with that Officer Paul Fressola Computer Forensics Unit Stratford Police

What is the update of your case? Best Regards Abdur rahim sopon Data Recovery expert Founder of Data

thanks will test it odd that they are using retrospect with windows. On Wed, Apr 15, 2026 at 2:26 PM

thank you all On Tuesday, April 14, 2026 at 12:06:52 PM UTC+3 sopo...@gmail.com wrote: Thank you Best

Maybe you are blaming the read problem on microjogs when you should be blaming the other two

Are those ROM mode test points at the top left of the NAND flash? Can you at least get some sanity

IF you want to trust the customer - mean: he/she says that they didn't setup any password, AND IF

Years ago I imaged a surface and found a bit locked drive. The customer denied locking and was

Hello in the main window of PC-3000 utilities (where you would select an HDD manufacturer) if you go

He was advised to use to PC3000 ports so it is not an issue. On Tue, Apr 7, 2026, 8:47 AM wayne

I don't know if it helps, but module 0x01 in MQ01 is the GL file.

Locate the first LBA in CP 0xDC. This is a 32-bit little-endian double word. Offset(h) 00 04 08 0C

Hello I have sent everything you need for the DDI operations here: https://www.mediafire.com/file/

Thanks for your help. On Tue, Mar 31, 2026 at 12:13 PM 'Desert Data Recovery' via

I don't think of that as the "calculator". I'm thinking of a tool that evaluates

I have used Recovery toolbox for access but Datanumen is the Best tool , any indian tool is nowhere

Hi Joep Yes this could be electronics or Nand flash related issue. I will have to outsource it

Would be better if you initially just answered our questions. The ROM is unlocked, you told us that.

hello can you describe the behavior? which device do you have for SSDs? regards R. Ottieni BlueMail

you are right I thought is was the traditional hgst this is the wd version ids as hgst but its a

I can`t add much but according to DFL, they informed me that their solution is to disconnect the HSA

The red dots are the USB2 data lines, just solder x4 thin wires of a USB cable that correspond to

Dump the ROM before and after executing each patch. If you can upload your results, I may be able to

You received great advice so far. PC3000 cannot solve this. If you search in AI mode with these

Measure the voltages at the pins of Q1 (near the SATA power connector). You should find +3.9V, +5V, +

No SED from 02 Best Regards Abdur rahim sopon Data Recovery expert Founder of Data Recovery BD™ WP/

I have a 1TB 860 Evo. It has "failed" around a dozen times, and each time I recovered it by

Hi Thank you so much. I got setup file , however could not get Beta version v6.11 Thanks again for