Contraptor

A new version of GRemote is released. Source and binaries for Win, Linux, Mac are available on Github

LinkedIn I'd like to add you to my professional network on LinkedIn. - Alexander Alexander Ray

Hi list ! This will probably be of interrest to the people working on a metric version of contraptor.

Vit is right.. However.. just to be clear... 1/32 off TOTAL is your possible offset.. so it compounds

I have two questions about belts. 1) Given the contraptor 10 tooth pulleys, is the the forumla to get

Hey Josh, Thanks for the feedback, this is basically my reply to your email with added questions to

Update: we got the first batch of production angle, fabricated on a big mill at http://www.

Thank you & yes he told me the angle is what your waiting for the wiz not bang not boom

ok well if you falow that link and look above it imagine drilling and tapping these through the

Yeah, I've seen several DIY probes made by Reprap builders. This one is interesting: http://

floating nut would allow less lead screw mounting effecting table movement rails would effect it more

broken link On Thu, Dec 17, 2009 at 11:04 AM, joshua w. <jos...@gmail.com> wrote: if you

Closed loop control if we re-implement this in a arduino fine but here may be a open source pc

sexy bro! I plan on trying our own PCB 1 single sided too btw. For the reason of I want a linear

here is what I found so far. not 24v or 36 volts documented yet. http://hobbymechatronics.com/

this person used a 10 pin connector with the same chip as me but different wireing to the board what

Could 2 15+ volt setups from pc power supplies the modern ones be used to make a cheap 30v supply?

True, Duemilanoves have more memory than Diecimilas. The GCode Interpreter doesn't fit in 14K

Here is a good info/schematic for parallel port: http://pminmo.com/pport/pport.htm I think it would

google sites can be closed or open with file storage that is versioned I use zips in my google site

Well I would not be using the pic micro controler or the interface chip max232 and what is left is

but adobe bypasses cups On Mon, Dec 7, 2009 at 3:17 AM, joshua w. <jos...@gmail.com> wrote:

oh I thought belts would not work with it. sliding elements mini cnc is what I had my eye on but maby

eheh.. Yah and English is suppose to be one of the hardest languages :) On Fri, Dec 4, 2009 at 4:42

I really don't know a lot about Stereolithography process, other than that it involves UV laser

> The A3979 also has a lower cost TI chip option & it does not have > external resistors...