Consensys Powerports Card
an6...@anon.penet.fi
working with SCO Unix. I purchased the latest drivers from Consensys but I
am having problems getting them to work becuase I am unsure of how the
jumper settings are supposed to be set up on this card, since I bought the
card second hand and unfortunately the manual I have does not outline the
jumper settings properly. If anybody out there has a manual and can give me
some insight into how to go about setting the jumpers properly I would
*really* appreciate it.
Thanks.
-------------------------------------------------------------------------
To find out more about the anon service, send mail to he...@anon.penet.fi.
Due to the double-blind, any mail replies to this message will be anonymized,
and an anonymous id will be allocated automatically. You have been warned.
Please report any problems, inappropriate use etc. to ad...@anon.penet.fi.
Paul Wolotsky
memory mapping - and we found it was difficult to configure the cards to run
successfully in machines with 16 MB because of the limitations of their
addressing scheme. As a matter of fact, I believe that we were only
successful in getting them to run in more recent versions of SCO UNIX (3.2 ver2)
and later) by limiting the machine to a 12 MB configuration.
We do have the original manuals from these boards, and would be willing to
help you. But first, we need more information in order to help:
What version of SCO UNIX?
How much RAM?
What other cards (Ethernet, etc) do you have in the system,
and what I/O ports, IRQ's, DMA, etc. do they use?
Other configuration information that may be pertinent.
--
Paul Wolotsky (p...@mcsp.com) Phone: 202-986-3654
President, Medical Computer Systems Fax: 202-986-4211
++ 1729 21st Street, NW ++ Washington, DC ++ 20009-1101 ++
