Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.

Dismiss

problem creating RAID1 volume with raidctl

11 views

Skip to first unread message

Frank Langelage

unread,

Sep 26, 2009, 3:32:17 PM9/26/09

I have a SUN Blade 2000 with an LSI 1068 controller inside.

root@sb2000:/ raidctl -l 3
Controller Type Version
----------------------------------------------------------------
c3 LSI_1068 1.07.00.00

There are two external disks attached over eSATA.

root@sb2000:/ raidctl -l -g 0.1.0 3
Disk Vendor Product Firmware Capacity Status
----------------------------------------------------------------------------
0.1.0 ATA ST31000340AS SD15 931.5G GOOD

root@sb2000:/ raidctl -l -g 0.4.0 3
Disk Vendor Product Firmware Capacity Status
----------------------------------------------------------------------------
0.4.0 ATA Hitachi HDT7210 A31B 931.5G GOOD

Now I'm trying to use the hardware RAID option, but no luck.

root@sb2000:/ raidctl -C "0.1.0 0.4.0" -r 1 3
Creating RAID volume will destroy all data on spare space of member
disks, proceed (yes/no)? y
Too many arrays.

I read, that this controller is limited to two arrays, but until now the
re is no array!

root@sb2000:/ raidctl -l
Controller: 3
Disk: 0.1.0
Disk: 0.4.0

Any hints what's causing the problem?

0 new messages