Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss

Opening Indy case

0 views
Skip to first unread message

Ivo Clarysse

unread,
Jul 8, 1996, 3:00:00 AM7/8/96
to

How do I open the case of my SGI Indy ? (preferably without
destroying it)

There is this large metal hook on the back end - should I press
it downwards ?


Tnx in advance,

Ivo Clarysse.


+------------------------------------------ -- - -
| Ivo Clarysse, http://www.kotnet.org/~soggie/
net.citizen sog...@kotnet.org |
- - -- ---------------------------------------------+

Sandy Gadsby

unread,
Jul 8, 1996, 3:00:00 AM7/8/96
to Ivo Clarysse

From the manual:
Facing the front of the Indy ,place your right thumb on the small
channel at the back of the cover (in the center by the metal tab), and
your second and third fingers under the finger ledge,

Snap the cover loose by bracing your thumb against the lip and pushing
up the finger ledge with the second and third fingers, followed by a
small push to toward the front.

Slide the cover forward about 1 inch and tilt it up to remove it.


Hope this helps.

--
Thanks,

<---------------------------+------------------------------->
Sandy Gadsby | Vice President
1.210.655.5514 | A&H Industries
san...@devon.gadsby.com | http://www.gadsby.com/
<---------------------------+------------------------------->

Bill Ainsworth

unread,
Jul 8, 1996, 3:00:00 AM7/8/96
to

That "small push" has to be a bit more forceful than that on my machine :)

Sandy Gadsby (san...@devon.gadsby.com) wrote:

--
WWW WWW
| | | | Bill Ainsworth
| |WWW| | Looking for 3D animation or graphics?
| | http://www.netaxs.com/~wha/fellow.html
| /-\ | Existence is impermanent and fluid. To cling to it is folly.
| | | | "Come to Butthead..."
/=========\

Konstantin Olchanski

unread,
Jul 9, 1996, 3:00:00 AM7/9/96
to

> > How do I open the case of my SGI Indy ? (preferably without
> > destroying it)
>
> From the manual: ...


Opening the Indy box was the most masochistic experience in my life.

One of our Indys opens easily, just as they say in the manual,
to open the others, one has to pry the top off with a crowbar.

Why on Earth did they not just use normal screws?

C.O.

Stuart Priest

unread,
Jul 9, 1996, 3:00:00 AM7/9/96
to
All of our Indy's that have come from Switzerland have been very easy to
open, but recently we bought two R5000SC Indy's which came from the USA,
both of which are extremely hard to open! Obviously Americans are much
stronger than Europeans (or maybe every American has a crowbar?)!

Mr Sheep
--

Stuart Priest, Computer Manager pri...@yorvic.york.ac.uk
Protein Structure Group http://www.yorvic.york.ac.uk/~priest
University of York InPerson :
pri...@heffalump.chem.york.ac.uk
Heslington, York YO1 5DD, U.K. Telephone : 44 1904 432592

Reto Koradi

unread,
Jul 9, 1996, 3:00:00 AM7/9/96
to pri...@yorvic.york.ac.uk

Stuart Priest <pri...@yorvic.york.ac.uk> wrote:
>All of our Indy's that have come from Switzerland have been very easy to
>open, but recently we bought two R5000SC Indy's which came from the USA,
>both of which are extremely hard to open! Obviously Americans are much
>stronger than Europeans (or maybe every American has a crowbar?)!

Or Swiss people make better quality products than Americans? :)
--
Reto Koradi (k...@mol.biol.ethz.ch, http://www.mol.biol.ethz.ch/~kor)


Konstantin Olchanski

unread,
Jul 10, 1996, 3:00:00 AM7/10/96
to

In article <4ru42k$b...@news.eunet.ch>, Reto Koradi <k...@spectrospin.ch> writes:
> Stuart Priest <pri...@yorvic.york.ac.uk> wrote:
> >All of our Indy's that have come from Switzerland have been very easy to
> >open, but recently we bought two R5000SC Indy's which came from the USA,
> >both of which are extremely hard to open! Obviously Americans are much
> >stronger than Europeans (or maybe every American has a crowbar?)!
>
> Or Swiss people make better quality products than Americans? :)


Incidentally, I use my Swiss Army knife to open our US Indys...


C.O.

0 new messages