I recently got a Macintosh IIfx (a Mac II upgraded to a Mac
IIfx), but the thing will not turn off. You have to unplug the unit to
turn it off.
Pushing the power button doesn't do any thing when the unit is
on, and if you select 'Shutdown' it just comes up with 'It's not safe
to turn off your computer', instead of powering off like a Mac II.
Is there a jumper or something that would lock out from you
turning off the computer?
-Lockar
> Is there a jumper or something that would lock out from you
> turning off the computer?
Check and see if there is a slot on the power button. If there is and
the button is flush with the case turn the button it until the power
button comes out.
--
Charles
There's also a button on the back of the Mac II (near the PSU) that
forces restarts.
Speaking from bitter experience of course :-)
--
Andy Hewitt ** FAF#1, (Ex-OSOS#5) - FJ1200 ABS
Windows free zone (Mac G5 Dual Processor)
<http://andyhewitt.webhop.net/>
(updated Nov. 2005)
The Mac II, Mac IIx and Mac IIfx do not have this feature. So it
has to be something else..
-Lockar
In article <181220051753525910%for...@mac.com>, Charles
Hmmm, I've never seen this message from a Mac. Are you sure it doesn't
say "It is *now* safe to turn off your computer"? That's what you get
from Macs who lack "soft power", i e Macs that you can't power off
completely from the menu choice Shutdown.
It does however seem strange that nothing happens when you push the
power button.
Just a thought,
/Stefan
Stefan,
LOL You are correct. That was a typo.. It is 'now' and 'not'.
I find the whole thing strange. The Mac II can be turned off by
going to 'Shutdown'.
I found some jumpers on the motherboard labled j106 and j103
any idea what these are for?
-Lockar
In article <864q558...@karlslund.homeunix.org>, Stefan Lindstrom
Ed
Hope, your problem may be solved easily.
Regards,
LU
I thought this was the case as well. So I reinstalled the
System software (7.01) with a reformat. Still turns on, but will not
turn off unless I pull the plug. I am guessing it's a hardware issue.
I thought it was a jumper some where that locked out shutdown.
But from what you guys are telling me there is no such jumper.
Figures I get a IIfx and it's defective! LOL
-Lockar
In article <lookee-FC7B96....@news.highway.telekom.at>, LU
> I thought this was the case as well. So I reinstalled the
> System software (7.01) with a reformat. Still turns on, but will not
> turn off unless I pull the plug. I am guessing it's a hardware issue.
> I thought it was a jumper some where that locked out shutdown.
>
> But from what you guys are telling me there is no such jumper.
> Figures I get a IIfx and it's defective! LOL
Double check the power button at the back. I'm pretty sure there was a
lock mechanism that would stop shutdown and auto restart after a power
failure.
djb
--
The moral difference between a soldier and a civilian is that the soldier
accepts personal responsibility for the safety of the body politic of which he
is a member. The civilian does not. ‹ Robert A. Heinlein
> In article <201220051740494004%loc...@nosppam.com>, Lockar
> <loc...@nosppam.com> wrote:
>
> > I thought this was the case as well. So I reinstalled the
> > System software (7.01) with a reformat. Still turns on, but will not
> > turn off unless I pull the plug. I am guessing it's a hardware issue.
> > I thought it was a jumper some where that locked out shutdown.
> >
> > But from what you guys are telling me there is no such jumper.
> > Figures I get a IIfx and it's defective! LOL
>
> Double check the power button at the back. I'm pretty sure there was a
> lock mechanism that would stop shutdown and auto restart after a power
> failure.
Yeah, I said that bloody ages ago! ;-)
(Mac IIci only) Set date to 20 Sep 1989 to get a graphical easter egg
"Lockar" <loc...@nosppam.com> wrote in message
news:201220051740494004%loc...@nosppam.com...
> Dave Balderstone <dave@N_O_T_T_H_I_S.balderstone.ca> wrote:
>
> > In article <201220051740494004%loc...@nosppam.com>, Lockar
> > <loc...@nosppam.com> wrote:
> >
> > > I thought this was the case as well. So I reinstalled the
> > > System software (7.01) with a reformat. Still turns on, but will not
> > > turn off unless I pull the plug. I am guessing it's a hardware issue.
> > > I thought it was a jumper some where that locked out shutdown.
> > >
> > > But from what you guys are telling me there is no such jumper.
> > > Figures I get a IIfx and it's defective! LOL
> >
> > Double check the power button at the back. I'm pretty sure there was a
> > lock mechanism that would stop shutdown and auto restart after a power
> > failure.
>
> Yeah, I said that bloody ages ago! ;-)
You did too.
Then someone said that the lock on the button came in with the IIci.
I've not got an fx to hand, but I'm pretty certain that it had the
locking power switch. Has a slot in it, that you could turn to lock it
in.
Dave
[Snipped Text]
> > > > But from what you guys are telling me there is no such jumper.
> > > > Figures I get a IIfx and it's defective! LOL
> > >
> > > Double check the power button at the back. I'm pretty sure there was a
> > > lock mechanism that would stop shutdown and auto restart after a power
> > > failure.
> >
> > Yeah, I said that bloody ages ago! ;-)
>
> You did too.
>
> Then someone said that the lock on the button came in with the IIci.
>
> I've not got an fx to hand, but I'm pretty certain that it had the
> locking power switch. Has a slot in it, that you could turn to lock it
> in.
OK, it sounds like nobody here is too sure, how about suggesting that
the OP has a physical look at the back of the machine and see if there
is a button there? It can't take up too much time, wastes no disk space,
and won't involve removing the casing.
Or is that a daft suggestion?
Quite a lot of models had this.
I know the IIci did. I know my Quadra 840av does. I think most models
without mechanical power switches from the 68K era have this feature.
-- David
> OK, it sounds like nobody here is too sure, how about suggesting that
> the OP has a physical look at the back of the machine and see if there
> is a button there? It can't take up too much time, wastes no disk space,
> and won't involve removing the casing.
>
> Or is that a daft suggestion?
I thought that that was what you and I were suggesting...
But as I haven't managed to find any IIfx manuals in my stash (did find
a Mac Plus manual tho'!) I will check next time I'm near a real one just
to satisfy my curiosity.
Dave
[lockable power button]
> I know the IIci did. I know my Quadra 840av does.
Add the IIsi, the IIcx and the IIvx. But those are all 'compact' form
factor Mac IIs. Anybody with a II or IIx, if not IIfx?
hauke
According to:
http://docs.info.apple.com/article.html?artnum=2159
it has a soft power switch. But according to:
http://docs.info.apple.com/article.html?artnum=3033
it does not support auto-power-on without hacking the power supply.
Obviously, later model Macs used a different power supply, which is why
they do support auto-power-on via the locking button on the back of the
case.
-- David