Discussions - comp.protocols.ppp

	LCP terminated by peer
	Hi all can anyone tell from the following log extract why the connection attempt does fail? <29>Jul 3 19:40:49 pppd[835]: Connect: ppp0 <--> /dev/ttyACM0 <31>Jul 3 19:40:51 pppd[835]: rcvd [LCP ConfReq id=0x2 <accomp> <pcomp> <asyncmap 0x0> <magic 0xe2f53b5a>] <31>Jul 3 19:40:51 pppd[835]: sent [LCP ConfReq id=0x1 <asyncmap 0x0>... more » By swaakaa - Jul 3 - 2 new of 2 messages

	RAS Server Setup
	Hello Friends, I want to connect to Linux machines using D-link serial port modem via epabx. i use concept of dial-in and dial-out server to connect to this machines . i use wvdial and ppp as dial-in server and use mgetty for handling incoming calls is any buddy plz tell me the all configuration of RAS server setup??... more » By Nil - Jul 2 - 1 new of 1 message

problems detecting a broken connection

Hi, I experience problems with the detection of a broken connection using pppd v2.4.4 for a GPRS connection. From time to time the connection goes done (probably due to bad GSM coverage). I'd like to be able to detect this case and force a reconnection. The parameter pair lcp-echo- interval and lcp-echo-failure seem to be the appropiate tool for this... more »

By Matthias Kaehlcke - Jun 26 - 1 new of 1 message

	AT&T dsl internet & dsl internet services providing company.
	[link] An AT&T hih speed dsl internet providing company. Choose the best att high speed internet DSL from att. By Nancy - Jun 26 - 1 new of 1 message

	invalid local and remote IP addresses after connection attempt
	Hi! I'm using pppd 2.4.1 on a ARM9 device (Linux version 2.6.14-M5) and would like to connect to a UMTS/GPRS provider using a MD300 USB UMTS/ GPRS modem from sony ericsson. Unfortunately I get always the following invalid IP's when I try to connect: local IP address 10.64.64.64 remote IP address 10.112.112.112... more » By swaakaa - Jun 22 - 3 new of 3 messages

ppp daemon, radius plugin, eap-md5 authentication

Hi all, I'm currently running a ppp daemon which authenticates users using the radius plugin. Everything works fine except that the radius plugin only handles the following authentication methods: PAP, CHAP, MS-CHAP, MS-CHAPv2 and some of the users can only use EAP-MD5. At the moment, I'm using the /etc/chap-secrets file on the ppp server... more »

By Yannick - Jun 12 - 1 new of 1 message

	PAP often fails: log decode ?
	In my previous thread: debug dialup login & why don't ISP's show engaged ? ...OK thanks. Today it's bad. I'm repeatedly charged to connect with failures !! Log shows:--------- May 4 14:11:14 localhost pppd[7995]: pppd 2.4.1 started by root, uid 0 May 4 14:11:35 localhost pppd[7995]: Serial connection established.... more » By no-topp...@motz.invalid - May 4 - 2 new of 2 messages

	Support of Rfc 2686 The Multi-Class Extension to Multi-Link PPP
	Hi All, I wanted to know about the support of Rfc 2686 The Multi-Class Extension to Multi-Link PPP in the current release of ppp 2.4.4 ? thanks & Regards Harvinder Bajaj By hbajaj - Apr 29 - 1 new of 1 message

	Unable to browse Internet
	Dear Team, I installed RASPPPOE Server on Windows XP machine. From PPPOE client, I can connect to the server but cannot browse the internet. This point is mentioned in FAQ, but I verified my server side MTU values. The following is the output from ipconfig /all command: Microsoft Windows XP [Version 5.1.2600]... more » By abc.bhas...@gmail.com - Apr 14 - 1 new of 1 message

Proxying PPP from ATM to Ethernet and vice versa

Hi! I'm currently developing at some SoHo Router which should be able to speak both PPPoE and PPPoA. In fact, the modem is a separate machine (TI SoC with ADSL logic onboard), accessible via a dedicated Ethernet NIC. For PPPoE the modem simply bridges external and internal Ethernet interfaces, so the complete PPP dial-in (including authentication) can be done on... more »

By n0-1 - Apr 8 - 1 new of 1 message