Description:
Discussion of SCSI-based peripheral devices.
|
|
|
Tekram DC-390 SCSI and Windows Vista/Windows7
|
| |
Hello group ;-) i just got an Intel Atom based Mini-PC running on Windows7. Since I have an old Epson SCSI flatbaed scanner which should be used on this pc I had the problem to find a PCI SCSI Card which fits into the only low profile slot the new machine offers. Adaptec 2930LP costs about 120 Euros at ebay, so I decided to buy an old... more »
|
|
SAS
|
| |
Hello All Does anyone here use a SAS HA ? Lee
|
|
How to call ASPI in protect mode (use DJGPP)
|
| |
I want try to send SCSI command via ASPI driver in Dos7.1 protect mode. but I don't know how to start... have any sample can read? I can use DMPI to call BIOS function.but how to call ASPI driver fun?
|
|
Config SCSI BIOS
|
| |
The point: SCSI can not be activated in BIOS if SATA RAID present; OS will not load. The Question: How can I have my SCSI tape drive detected without loosing my OS SATA RAID installation? Details: I have a Gateway brand E-9510T server for which I lost the original OS build on SCSI RAID. It never did accept the OS installation on SCSI so... more »
|
|
high pass filter at very low frequency
|
| |
Fortumille lunta tupaan. Valtio ostattaa sen ulos Fingridistä. Ja tutusti asia taas niin vaikeaa, ettei löytynyt edes tekstitv:n puolelta. Siltaappaa! Vasta viikko sitten OL-3 projekti meni plutoniumpaskojen laittomista poltoista USA:han 3v tutkintaan. Fennovoimalle kenomonoa Kristiinan kuntafiksuilta, jotta sinkelit lentää!.... more »
|
|
An entry level question
|
| |
Dear all , I know there is a task router entity in SAM , which layer does this entity resident ? In transport layer ? Many thanks
|
|
write cache on adaptec 2405
|
| |
Hi I enabled read cache on my 2405 but I disabled write cache because of the ugly warning. I wonder if this is really dangerous. I have two mirrors on my server. Will power failure ruin the mirror and make it unredable if I enable write cache. I am running linux.
|
|
How to reclaim device name after malfunction?
|
| |
Hi Sometimes when I hotplug a SATA device to/from say /dev/sdb on my Mandriva 2009.1 system, it malfunctions/times out, and cannot be detected. Then when I plug in another SATA device, it gets detected as /dev/sdc even though /dev/sdb is no longer there. How can I reclaim /dev/sdb in this case? Thanks... more »
|
|
vintage scsi printer question -- postscript - linux - windows
|
| |
Hello from a muggy summer's day in germany.. Q: How does one send a PostScript file to a SCSI printer???? We are trying to get an old -- Agfa PCR II Film Recorder -- to work. knoppix 5.1.1 reports scsi0 : Tekram DC390/AM53C974 V2.1d 2004-05-27 scsi 0:0:1:0: Printer AGFA-MTX PCR2 2.22 PQ: 0 ANSI: 0... more »
|
|
|