Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss
RAID-10 AHA-39320A, (4)147GB U320 HD's
0 views
Skip to first unread message
Chris05161967
May 31, 2009, 7:42:48 AM5/31/09
to
I originally had (4)147GB U320 HD's setup in a RAID-10. It consisted
of one Seagate and, three Fujitsu. All four are attached to 80-Pin
converters. Then attached to a 4-Device 68-Pin Cable..
of one Seagate and, three Fujitsu. All four are attached to 80-Pin
converters. Then attached to a 4-Device 68-Pin Cable..
Lately, When the SCSI BIOS loads, it says the Seagate failed. So I
replaced it with, the first of three, Fujitsu HD's.
The BIOS couldn't even find the first two replacement Fujitsu HD's.
The third replacement showed a data error.
So, My ultimate question is, do I have several bad HD's and/or, do I
have a bad 80-68 pin converter.
Cydrome Leader
Jun 6, 2009, 1:22:06 AM6/6/09
to
try each disk one at a time on a converter that "works" with a good drive.
Unless your replacement drive are from the trash, it's likely the cable
is having issues.
0 new messages