Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss
Identify SCSI terminator AMP 869794-1
4 views
Skip to first unread message
msg
Mar 19, 2009, 5:31:08 PM3/19/09
to
I have a 68-pin ribbon cable terminated with an AMP 869794-1 "Differential
Terminator"; some documents describe certain multimode LVD/SE terminators as
capable of sensing HVD and either properly terminating it or tri-stating off
the bus. There is nothing on the part which states what modes it supports.
Terminator"; some documents describe certain multimode LVD/SE terminators as
capable of sensing HVD and either properly terminating it or tri-stating off
the bus. There is nothing on the part which states what modes it supports.
Does anyone know the capabilities of this part?
Thanks,
Michael
daytripper
Mar 19, 2009, 10:27:21 PM3/19/09
to
On Thu, 19 Mar 2009 15:31:08 -0600, msg <msg@_cybertheque.org_> wrote:
>AMP 869794-1
http://rocky.digikey.com/WebLib/Amp/Web%20Data/869794-1.pdf
It's simply a passive differential terminator. There's nothing but resistors
on the signal lines, so it's clearly not a multi-mode terminator...
msg
Mar 25, 2009, 9:46:32 PM3/25/09
to
daytripper wrote:
> On Thu, 19 Mar 2009 15:31:08 -0600, msg wrote:
>
>
>>AMP 869794-1
>
>
> http://rocky.digikey.com/WebLib/Amp/Web%20Data/869794-1.pdf
>
> It's simply a passive differential terminator. There's nothing but resistors
> on the signal lines, so it's clearly not a multi-mode terminator...
>
Thanks for the link. I can't imagine where I found 68pin internal HVD
cables with terminators as none of my machines have an HVD HBA (AFAIK)
but the diagram doesn't lie ;)
Michael
0 new messages