info
Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss
Ion scan2pc vista
6 views
Skip to first unread message
guyrws
Dec 20, 2008, 11:36:15 AM12/20/08
to
I have an Ion slide scanner which is supplied with Arcsoft Photo
Impression 6. I am running it on Vista Ultimate. When the software
runs the results are great, but it is unstable and slow.
So I have looked at other slide scanning software and came up with
Vuescan. It looks a lot more professional. However, it can not find
the scanner. I have looked in the device manager and the scanner
appears under imaging devices, but in control panel/scanners and
cameras the Ion slides2pc does not appear. I have tried adding a
device but vista does not recognise the .inf files provided on the
driver disc.
Impression 6. I am running it on Vista Ultimate. When the software
runs the results are great, but it is unstable and slow.
So I have looked at other slide scanning software and came up with
Vuescan. It looks a lot more professional. However, it can not find
the scanner. I have looked in the device manager and the scanner
appears under imaging devices, but in control panel/scanners and
cameras the Ion slides2pc does not appear. I have tried adding a
device but vista does not recognise the .inf files provided on the
driver disc.
Is this a case of another bad Vista driver compatibility?
Any suggestions please?
CSM1
Dec 20, 2008, 8:10:52 PM12/20/08
to
"guyrws" <grws...@dsl.pipex.com> wrote in message
news:e848160f-f944-45c3...@f40g2000pri.googlegroups.com...
news:e848160f-f944-45c3...@f40g2000pri.googlegroups.com...
Look at the supported scanner list.
Is your scanner listed.
http://www.hamrick.com/vuescan/vuescan.htm#supported
Did you get the Vista version of VueScan?
http://www.hamrick.com/vsm.html
--
CSM1
http://www.carlmcmillan.com
--
0 new messages