Joel <Jo...@NoSpam.com> writes:
> I don't know how much you know about refilling, but if you can use the
> current newest *refillable* cartridge then it should be PAIN-FREE.
The short answer: not much!
In Japanese stores the products can be pretty variable, depending on
the pressure of the manufacturers on the retailers. For example, there
was a time when chip resetters were taboo.
I don't know about the refillable carts, I so far use the standard
method of drilling holes (or punching out the existing hole), filling
with thin-tipped bottle of ink, and taping the hole. Not messy per se,
but the bottom of the carts tend to leak when filling until the hole
is taped again.
> No messy, and depending on the printer (I am Epson user) you may not even
> have to remove the cartridge off the printer. But if you use the older
> catridge with *sponge* inside then I agree it's messy and pain.
> The new refillable ink cartridge has no sponge inside, so you just fill
> the ink up to the rim, no sponge to cause any bubble (air), and no sponge to
> cause dried ink building up. And they should have ARC (Auto Reset Chip) so
> you don't even have to mess with the Chip Resetter.
Interesting. I'm not sure if such carts are even available generally
in Tokyo, but I will have a look. 3rd part carts are often opaque so
one cannot see if there is a sponge or not. Some are clear, without
sponge, but I have had a bad experience with one of those where the
chip is never recognized by the printer (this is a BCI-7e type).
Never heard of the ARC before, I'll have to read up on that on the web.
> And if there is Chip Resetter for your cartridge then there should be
> *refillable* cartridge with built-in ARC. My epson uses 6-cartridges and it
> costs around $20-25 for 6 cartridges (I paid $20 some years ago and still
> going strong)
Very nice!
Thanks for your information, that makes me feel a lot better about the
possibilities for maintaining my printers cheaply in the future.
--
Gernot Hassenpflug