Detect if running in Windows environment
Sonny
a Windows environment but I think it is not applicable in Win XP.
Using Int 2F/AX=1600h or AX=160Ah or getenv("windir") failed. I mean,
I run the program in Win XP and it did not detect that it is running
in windows (The program ran!). Is there a new way? Thanks.
pe...@nospam.demon.co.uk
sman...@gmail.com "Sonny" writes:
I assume you're running a DOS program as you're calling Int 2F.
There might be a neater way, but looking at what is set in the
environment should give a clue -- running
command /c set >settings.txt
from a XP command prompt shows up lots of stuff that couldn't be
there in a pure DOS environment (e.g. spaces in pathnames), so
analysing the file produced by
system("set >settings.txt");
should give some clues, assuming that system() invokes command.com
and not cmd.exe.
Pete
--
"We have not inherited the earth from our ancestors,
we have borrowed it from our descendants."
Herbert Kleebauer
In Win32 all exe have 16 and 32 bit part. If the program is started
in DOS, then exe is a valid 16 bit exe which, when executed, mostly
just prints "This program requires Windows". If started in Windows,
the 32 bit part is executed. But you can do it also the other way.
Put your program in the 16 bit part of the exe and output in the
32 bit part: "This program requires a real DOS" and exit.
Olof Lagerkvist
It will still be possible to run the 16-bit program under Windows in
that case. All that is required is an ntvdm session started with a
config.nt file with the "DOSONLY" directive.
--
Olof Lagerkvist
ICQ: 724451
Web: http://here.is/olof
Sonny
uhm, how can I do this? Can you please elaborate, if possible with a
code. Thanks
Bill Leary
"Sonny" <sman...@gmail.com> wrote in message
news:1173920544.6...@o5g2000hsb.googlegroups.com...
> On Mar 14, 6:20 pm, Herbert Kleebauer <k...@unibwm.de> wrote:
> uhm, how can I do this? Can you please elaborate, if possible with a
> code. Thanks
I've been using the following since Windows 95, or maybe even Windows 3.1.
#include <stdio.h>
#include <stdlib.h>
int main(int argc, char *argv[])
{
char *test;
for (test = getenv("PATH"); *test != '\0'; test++)
{
if ((strnicmp(test, "\\windows\\", 9) == 0)
|| (strnicmp(test, "\\winnt\\", 7) == 0))
{
fprintf(stderr, "Program won't run under Windows\n");
fflush(stderr);
exit(-1);
}
}
printf("Not windows, we're good\n");
fflush(stdout);
/* Rest of program goes here */
}
The draw back, of course, is that if the user installs in a non-standard
location, this will fail.
It will also fail if the user, say under Windows 95, boots to DOS rather
than Windows because "\Windows\" will still be in their path.
It worked for my purposes because the customer machines were always built
"normally," thus causing the Windows directory to be where it belonged. For
my own purposes, I always included a command line argument to override the
detection. So, when I had the machines booted under DOS rather than
Windows, I could include the override and get the program to work anyway.
But the users were never told about the override, so they couldn't pull that
trick.
- Bill
Herbert Kleebauer
You have to use a linker which allows you to specify an alternative
DOS stub. Use your 16 bit program as DOS stub and simple output
an error message in the Windows program.
Or you can build the exe "by hand". Here an example for a program
which determines the OS version. The windows part uses GetVersionExA
from kernel32.dll and the DOS part uses int21/ah=30 to get the OS
version.
@echo off
echo Bj@jzh`0X-`/PPPPPPa(DE(DM(DO(Dh(Ls(Lu(LX(LeZRR]EEEUYRX2Dx=>gver.com
echo 0DxFP,0Xx.t0P,=XtGsB4o@$?PIyU WwX0GwUY Wv;ovBX2Gv0ExGIuht6>>gver.com
echo T}{zs~@gwkCG@OEKcUt`s}@mqqCsy?seHCsaPhxr?@zAB`LrPEyoDt@Cj?>>gver.com
echo pky_jN@QEKpEt@ij?jySjN@REKpEt@jj?jyGjN@SEKkjtlGuNw?p@pjirz>>gver.com
echo VRvAZYX??YLtX@@?~XCo?V~rDZ@?bZ?@MV@?os1GG`Lb~eafgXzoG?Ca~g>>gver.com
echo O1wG?w?ygF?fyALHsq@w`G`LKLsdrTdu_Sl1qTni`To=q@ooo?ooo?ILo?>>gver.com
echo sdrTdu_Sl1qTnmhTo=q@ooo?ooo?ILo?sdrTdu_Sa1qTkhtTo=c@ooo?oo>>gver.com
echo o?ILo?sdrTdu_So1qTs`kTe=ePeeeTeeeTILe@sdrTdu_Sb1qT=crDxc__>>gver.com
echo @?AooG_B?@?~NcC?fOCGf?SCG_K_aFDsFBkzZBUKDOKS@KVCO?@OudxH_F>>gver.com
echo Zo@N??D@J?C?K?UHZoOXO?Y_X?OV?@VAX?EZC?FZC?CX_?BDZ?OCZ?YOV?>>gver.com
echo OVO?ODZ?[IZ?{VO?ORZCZ[V?smYOswdTAoXGXOX?CXC?_LZ?Z_VK1Z~rZO>>gver.com
echo k@O[DGOiVGOyVGOEVKcDZOHZO?XOW@GVO_HZO?VOy@ZOG?RTTSrQDDcmqO>>gver.com
echo VkkDZOk@dLFS`rrTAdfT@wnTDJ?SDMQTqrK@kcmS[Vk`iVO_yVO_EVOoFZ>>gver.com
echo O?hwDTqOsTdbnTXrrDsdFTcsRTm`GTdkcTqVYSdshTkhETFXdPUsdTrqdT>>gver.com
echo mnhT@wDT[g?C??QCST~B??OCPU}A~??`?Q_OC=?GcgXkFJXGCFBMX_gFmt>>gver.com
echo LtXQgJg}H}iXJQT~?K?OGOdr?Su_sP1qdTi`lT=qnDdr?Su_sP1qdTmhlT>>gver.com
echo =qnDdr?Su_sP1qdThtaT=ckDdr?Su_sP1qdT`koT=esDdr?Su_sP1qdTcr>>gver.com
echo bTU?=OXGxAPM}I@??pGC?ba?Azy?NwBuHCfA?MoA?MEUGQ}gan?PMQLg?K>>gver.com
echo B]XsLFZ?I?I_GEECFs?FXBgBBqj~QEaAp??@DB?B?QSOLt?C~ti=OKT?b?>>gver.com
echo ?`?QSO?i?CQWg@i??PEg@C??QCT~OL?OOO?H?oi[tPFg?C??QCQFg@i??P>>gver.com
echo T~?K?O?O?i?CGT~B??OCW=@A??QCtX@O?BWNhqvT_dsDqqdTZqnDZSHGaZ>>gver.com
echo ~r0x>>gver.com
gver.com>gver.exe
gver.exe>gver.bat
call gver.bat
for %%i in (com exe bat) do del gver.%%i
echo PlatformId=%ver_platf%
echo MajorVersion=%ver_major%
echo MinorVersion=%ver_minor%
echo BuildNumber=%ver_build%
echo CSDVersion=%ver_csd%
:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
For DOS:
dwPlatformId=ffffffff
:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
FOR Windows:
dwMajorVersion
--------------
Major version number of the operating system. This member can be one of
the following values.
Operating System Meaning
Windows 95 4
Windows 98 4
Windows Me 4
Windows NT 3.51 3
Windows NT 4.0 4
Windows 2000 5
Windows XP 5
Windows Server 2003 family 5
dwMinorVersion
--------------
Minor version number of the operating system. This member can be one of
the following values.
Operating System Meaning
Windows 95 0
Windows 98 10
Windows Me 90
Windows NT 3.51 51
Windows NT 4.0 0
Windows 2000 0
Windows XP 1
Windows Server 2003 family 2
dwBuildNumber
-------------
Build number of the operating system.
Windows Me/98/95: The low-order word contains the build number of the
operating system. The high-order word contains the major
and minor version numbers.
dwPlatformId
------------
Operating system platform. This member can be one of the following values.
Value Meaning
0 VER_PLATFORM_WIN32s Win32s on Windows 3.1.
1 VER_PLATFORM_WIN32_WINDOWS Windows 95, Windows 98, or Windows Me.
2 VER_PLATFORM_WIN32_NT Windows NT, Windows 2000, Windows XP,
or Windows Server 2003 family.
szCSDVersion
------------
Pointer to a null-terminated string, such as "Service Pack 3", that
indicates the latest Service Pack installed on the system. If no Service
Pack has been installed, the string is empty.
Windows Me/98/95: Pointer to a null-terminated string that indicates
additional version information. For example, " C"
indicates Windows 95 OSR2 and " A" indicates Windows 98
Second Edition.
:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
The source code:
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; get the OS version Win/DOS ;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
UseIdatSection=0 ; 0 if no idat section is used
UseUdatSection=0 ; 0 if no udat section is used
;#==================================================================#
;# Start of Headers #
;#==================================================================#
; +--------------------------------------------+
; | Start of DOS Header |
; +--------------------------------------------+
; DOS .EXE header
dc.b 'MZ' ; Magic number
dc.w dosfilesize\512 ; Bytes on last page of file (0->512)
dc.w (dosfilesize-1)/512+1
; Pages in file (Page=512 byte)
dc.w 0 ; Relocations (nr of entries)
dc.w doshead_end/16 ; Size of header size in paragraphs (16 byte)
dc.w 0 ; Minimum extra paragraphs needed
dc.w $ffff ; Maximum extra paragraphs needed
dc.w 0 ; Initial (relative) SS value (ss=load_adr+nr)
dc.w dosstack ; Initial SP value
dc.w 0 ; Checksum
dc.w dosmain ; Initial IP value
dc.w 0 ; Initial (relative) CS value (cs=load_adr+nr)
dc.w reloc ; File address of relocation table
dc.w 0 ; Overlay number
dc.w 0,0,0,0 ; Reserved words
dc.w 0 ; OEM identifier (for e_oeminfo)
dc.w 0 ; OEM information; e_oemid specific
dc.l 0,0,0,0,0 ; Reserved words
dc.l WinHeader ; File address of new exe header
reloc:
doshead_end:
@=$0
dosmain:move.w s6,-(sp)
move.w (sp)+,s0
move.b #$30,m0
trap #$21
move.b m0,r1
move.l #_text+20,r6
bsr.w bin2hex
move.b r1,r0
bsr.w bin2hex
move.b m3,r0
bsr.w bin2hex
move.w #_text,r1
move.b #$09,m0
trap #$21
move.w #$4c01,r0
trap #$21
_text: dc.b "set ver_major=00000000",$0d,$0a
dc.b "set ver_minor=00000000",$0d,$0a
dc.b "set ver_build=00000000",$0d,$0a
dc.b "set ver_platf=ffffffff",$0d,$0a
dc.b "set ver_csd= ",'$'
bin2hex:move.w #2,r2
lsl.w #8,r0
_10: eor.b r0,r0
rol.w #4,r0
and.b #$0f,r0
add.b #$90,r0
adj_dec_add r0
addc.b #$40,r0
adj_dec_add r0
or.b #$20,r0
move.b r0,(r6.w)
inc.w r6
dbf.w r2,_10
addq.w #22,r6
rts.w
even 16
dosstack=@+256 ; 256 Byte stack
dosfilesize=@+256
; +--------------------------------------------+
; | End of DOS Header |
; +--------------------------------------------+
; +--------------------------------------------+
; | Start of Windows Header |
; +--------------------------------------------+
ImageBase== $00400000
SectionAlignment== 4096
FileAlignment== 512
WinHeader=@@
@=ImageBase
; see WINNT.H for information
dc.b 'PE',0,0 ; magic word
; _IMAGE_FILE_HEADER:
dc.w $014c ; Machine ($014c=Intel x86 processor)
dc.w NumberOfSections ; NumberOfSections
dc.l $36a57950 ; TimeDateStamp (seconds since 31.12.69 16:00)
dc.l 0 ; PointerToSymbolTable
dc.l 0 ; NumberOfSymbols
dc.w SizeOfOptionalHeader ; SizeOfOptionalHeader
dc.w $010f ; Charcteristics
; 0x0001 Relocation info stripped from file.
; 0x0002 File is executable (i.e. no unresolved externel references).
; 0x0004 Line nunbers stripped from file.
; 0x0008 Local symbols stripped from file.
; 0x0010 Agressively trim working set
; 0x0080 Bytes of machine word are reversed.
; 0x0100 32 bit word machine.
; 0x0200 Debugging info stripped from file in .DBG file
; 0x0400 If Image is on removable media, copy and run from the swap file.
; 0x0800 If Image is on Net, copy and run from the swap file.
; 0x1000 System File.
; 0x2000 File is a DLL.
; 0x4000 File should only be run on a UP machine
; 0x8000 Bytes of machine word are reversed.
@a=@ ; _IMAGE_OPTIONAL_HEADER
dc.w $010b ; Magic
dc.b 5 ; MajorLinkerVersion
dc.b 12 ; MinorLinkerVersion
dc.l SizeOfCode ; SizeOfCode
dc.l SizeOfInitializedData ; SizeOfInitializedData
dc.l SizeOfUninitializedData ; SizeOfUninitializedData
dc.l winmain-ImageBase ; AddressOfEntryPoint
dc.l BaseOfCode ; BaseOfCode
dc.l BaseOfData ; BaseOfData
dc.l ImageBase ; ImageBase
dc.l SectionAlignment ; SectionAlignment
dc.l FileAlignment ; FileAlignment
dc.w 4 ; MajorOperatingSystemVersion
dc.w 0 ; MinorOperatingSystemVersion
dc.w 0 ; MajorImageVersion
dc.w 0 ; MinorImageVersion
dc.w 4 ; MajorSubsystemVersion
dc.w 0 ; MinorSubsystemVersion
dc.l 0 ; Win32VersionValue
dc.l SizeOfImage ; SizeOfImage
dc.l SizeOfHeaders ; SizeOfHeaders
dc.l 0 ; CheckSum
dc.w 3 ; Subsystem
; 0: Unknown subsystem.
; 1: Image doesn't require a subsystem.
; 2: Image runs in the Windows GUI subsystem.
; 3: Image runs in the Windows character subsystem.
; 5: image runs in the OS/2 character subsystem.
; 7: image run in the Posix character subsystem.
; 8: image run in the 8 subsystem.
dc.w $0000 ; DllCharacteristics
dc.l $00100000 ; SizeOfStackReserve
dc.l $00001000 ; SizeOfStackCommit
dc.l $00100000 ; SizeOfHeapReserve
dc.l $00001000 ; SizeOfHeapCommit
dc.l $00000000 ; LoaderFlags
dc.l NumberOfRvaAndSize ; NumberOfRvaAndSize (entries
; in the data dir)
; ..............................................
; : Start of Image Data Directory :
; ..............................................
; virtual address, size
@b=@
dc.l 0,0 ; Export Directory
dc.l imp_start,imp_size ; Import Directory
dc.l 0,0 ; Resource Directory
dc.l 0,0 ; Exception Directory
dc.l 0,0 ; Security Directory
dc.l 0,0 ; Base Relocation Table
dc.l 0,0 ; Debug Directory
dc.l 0,0 ; Description String
dc.l 0,0 ; Machine Value (MIPS GP)
dc.l 0,0 ; TLS Directory
dc.l 0,0 ; Load Configuration Directory
dc.l 0,0 ; Bound Import Directory in headers
dc.l iat_start,iat_size ; Import Address Table
dc.l 0,0 ; 14
dc.l 0,0 ; 15
dc.l 0,0 ; 16
NumberOfRvaAndSize = (@-@b)/8
SizeOfOptionalHeader = @-@a
; ..............................................
; : End of Image Data Directory :
; ..............................................
; ..............................................
; : Start of Image Sections Header :
; ..............................................
@a=@
dc.b '.text',0,0,0 ; name
dc.l VSizeOf_text ; virtual size
dc.l VBaseOf_text ; virtual address
dc.l FSizeOf_text ; size of raw data
dc.l FBaseOf_text ; pointer to raw data
dc.l 0 ; pointer to relocatins
dc.l 0 ; pointer to line numbers
dc.w 0 ; number of relocations
dc.w 0 ; number of line numbers
dc.l $e0000020 ; characteristics
IF UseIdatSection
dc.b '.idat',0,0,0 ; name
dc.l VSizeOf_idat ; virtual size
dc.l VBaseOf_idat ; virtual address
dc.l FSizeOf_idat ; size of raw data
dc.l FBaseOf_idat ; pointer to raw data
dc.l 0 ; pointer to relocatins
dc.l 0 ; pointer to line numbers
dc.w 0 ; number of relocations
dc.w 0 ; number of line numbers
dc.l $e0000040 ; characteristics
ENDIF
IF UseUdatSection
dc.b '.udat',0,0 ; name
dc.l VSizeOf_udat ; virtual size
dc.l VBaseOf_udat ; virtual address
dc.l FSizeOf_udat ; size of raw data
dc.l FBaseOf_udat ; pointer to raw data
dc.l 0 ; pointer to relocatins
dc.l 0 ; pointer to line numbers
dc.w 0 ; number of relocations
dc.w 0 ; number of line numbers
dc.l $e0000080 ; characteristics
ENDIF
NumberOfSections=(@-@a)/40
; ..............................................
; : End of Image Sections Header :
; ..............................................
; characteristics
; 0x00000020 // Section contains code.
; 0x00000040 // Section contains initialized data.
; 0x00000080 // Section contains uninitialized data.
; 0x00000200 // Section contains comments or some other type of information.
; 0x00000800 // Section contents will not become part of image.
; 0x00001000 // Section contents comdat.
; 0x01000000 // Section contains extended relocations.
; 0x02000000 // Section can be discarded.
; 0x04000000 // Section is not cachable.
; 0x08000000 // Section is not pageable.
; 0x10000000 // Section is shareable.
; 0x20000000 // Section is executable.
; 0x40000000 // Section is readable.
; 0x80000000 // Section is writeable.
; +--------------------------------------------+
; | End of Windows Header |
; +--------------------------------------------+
evencom FileAlignment
SizeOfHeaders==@@
;#==================================================================#
;# End of Headers #
;#==================================================================#
;#==================================================================#
;# Start of Sections #
;#==================================================================#
; +--------------------------------------------+
; | Start of .text Section |
; +--------------------------------------------+
FBaseOf_text==@@
VBaseOf_text==(@-ImageBase+SectionAlignment-1)/SectionAlignment*SectionAlignment
BaseOfCode==VBaseOf_text
@=ImageBase+VBaseOf_text
; ..............................................
; : Start of Thunk Table :
; ..............................................
iat_start=@-ImageBase
USER32_thunk:
MessageBoxA:: dc.l USER32_MessageBoxA -ImageBase
dc.l 0
KERNEL32_thunk:
ExitProcess:: dc.l KERNEL32_ExitProcess -ImageBase
GetStdHandle:: dc.l KERNEL32_GetStdHandle -ImageBase
WriteFile:: dc.l KERNEL32_WriteFile -ImageBase
GetVersionExA:: dc.l KERNEL32_GetVersionExA -ImageBase
dc.l 0
iat_size=@-ImageBase-iat_start
; ..............................................
; : End of Thunk Table :
; ..............................................
; ..............................................
; : Start of Import Directory :
; ..............................................
imp_start==@-ImageBase
imp:
dc.l USER32_import -ImageBase
dc.l 0
dc.l 0
dc.l USER32_name -ImageBase
dc.l USER32_thunk -ImageBase
dc.l KERNEL32_import -ImageBase
dc.l 0
dc.l 0
dc.l KERNEL32_name -ImageBase
dc.l KERNEL32_thunk -ImageBase
dc.l 0
dc.l 0
dc.l 0
dc.l 0
dc.l 0
imp_size==@-imp
; ..............................................
; : End of Import Directory :
; ..............................................
USER32_name:
dc.b 'USER32.dll',0
even
USER32_import:
dc.l USER32_MessageBoxA -ImageBase
dc.l 0
even
USER32_MessageBoxA:
dc.w 0
dc.b 'MessageBoxA',0
even
KERNEL32_name:
dc.b 'KERNEL32.dll',0
even
KERNEL32_import:
dc.l KERNEL32_ExitProcess -ImageBase
dc.l KERNEL32_GetStdHandle -ImageBase
dc.l KERNEL32_WriteFile -ImageBase
dc.l KERNEL32_GetVersionExA -ImageBase
dc.l 0
even
KERNEL32_ExitProcess:
dc.w 0
dc.b 'ExitProcess',0
even
KERNEL32_GetStdHandle:
dc.w 0
dc.b 'GetStdHandle',0
even
KERNEL32_WriteFile:
dc.w 0
dc.b 'WriteFile',0
even
KERNEL32_GetVersionExA:
dc.w 0
dc.b 'GetVersionExA',0
even
; ..............................................
; : Start of Code :
; ..............................................
label_block
seg32
winmain::
move.l #VersionInfo,-(sp)
jsr.l (GetVersionExA)
move.l #text1,r5
move.l #VersionInfo+4,r6
move.l #4,r4
_10: bsr.l putstring
move.l (r6),r0
addq.l #4,r6
bsr.l hexout_r0
dec.l r4
bne.b _10
bsr.l putstring
move.l r6,r5
bsr.l putstring
moveq.l #0,-(sp)
jsr.l (ExitProcess) ; exit program
text1: dc.b "set ver_major=",0
text2: dc.b "set ver_minor=",0
text3: dc.b "set ver_build=",0
text4: dc.b "set ver_platf=",0
text5: dc.b "set ver_csd=",0
hexout_r0:
move.l r5,-(sp)
move.l #8,r2
move.l #_buf,r5
_20: rol.l #4,r0
move.b r0,r1
and.b #$0f,r1
cmp.b #9,r1
bls.b _10
add.b #'a'-10-'0',r1
_10: add.b #'0',r1
move.b r1,(r5)
inc.l r5
dbf.l r2,_20
move.l #_buf,r5
bsr.l putstring
move.l (sp)+,r5
rts.l
_buf: blk.b 8,0
dc.b $0d,$0a,0
putstring:
_20: move.b (r5),r0
inc.l r5
or.b r0,r0
beq.b _10
bsr.l putc
br.b _20
_10: rts.l
putc: move.b r0,_buf
eor.l r0,r0
add.l _handle,r0
bne.b _10
moveq.l #-11,-(sp)
jsr.l (GetStdHandle)
move.l r0,_handle
_10: moveq.l #0,-(sp)
move.l #_count,-(sp)
moveq.l #1,-(sp)
move.l #_buf,-(sp)
move.l r0,-(sp)
jsr.l (WriteFile)
or.l r0,r0
bne.b _20
_30: moveq.l #0,-(sp)
move.l #_text,-(sp)
move.l #_text,-(sp)
moveq.l #0,-(sp)
jsr.l (MessageBoxA)
moveq.l #0,-(sp)
jsr.l (ExitProcess)
_20: cmp.l #1,_count
bne.b _30
rts.l
_buf: dc.b 0
_text: dc.b 'write error',0
even4
_handle:dc.l 0
_count: dc.l 0
VersionInfo:
dc.l 148
blk.l 4
blk.b 128
; ..............................................
; : End of Code :
; ..............................................
VSizeOf_text==@-Imagebase-VBaseOf_text
@a=@
evencom FileAlignment
@=@a
FSizeOf_text==@@-FBaseOf_text
SizeOfCode==FSizeOf_text
; +--------------------------------------------+
; | End of .text Section |
; +--------------------------------------------+
; +--------------------------------------------+
; | Start of .idat Section |
; +--------------------------------------------+
FBaseOf_idat==@@
VBaseOf_idat==(@-ImageBase+SectionAlignment-1)/SectionAlignment*SectionAlignment
BaseOfData==VBaseOf_idat
@=ImageBase+VBaseOf_idat
; Insert initialized variables here (and set UseIdatSection=1
; at the top of this file). Because the code section is set
; r/w-able, you can put initialized variables also into the
; code section.
; var1: dc.l 0
; var2: dc.l $12345678
VSizeOf_idat==@-Imagebase-VBaseOf_idat
@a=@
evencom FileAlignment
@=@a
FSizeOf_idat==@@-FBaseOf_idat
; +--------------------------------------------+
; | End of .idat Section |
; +--------------------------------------------+
SizeOfInitializedData==FSizeOf_idat
; +--------------------------------------------+
; | Start of .udat Section |
; +--------------------------------------------+
FBaseOf_udat==@@
VBaseOf_udat==(@-ImageBase+SectionAlignment-1)/SectionAlignment*SectionAlignment
@=ImageBase+VBaseOf_udat
; Insert uninitialized variables here (and set UseUdatSection=1
; at the top of this file). Because the code section is set
; r/w-able, you can put uninitialized variables also at the END
; of the code section.
; buf1: blk.l 10
; buf2: blk.l 200
VSizeOf_udat==@-Imagebase-VBaseOf_udat
@a=@
evencom FileAlignment
@=@a
FSizeOf_udat==@@-FBaseOf_udat
; +--------------------------------------------+
; | End of .udat Section |
; +--------------------------------------------+
SizeOfUninitializedData==VSizeOf_udat
SizeOfImage==(@-ImageBase+SectionAlignment-1)/SectionAlignment*SectionAlignment
;#==================================================================#
;# End of Sections #
;#==================================================================#
Sonny
>
> read more ยป
ok, many thanks for the info. I'll try it.
Jim Leonard
> @echo off
> echo Bj@jzh`0X-`/PPPPPPa(DE(DM(DO(Dh(Ls(Lu(LX(LeZRR]EEEUYRX2Dx=>gver.com
> echo 0DxFP,0Xx.t0P,=XtGsB4o@$?PIyU WwX0GwUY Wv;ovBX2Gv0ExGIuht6>>gver.com
That's a really cool way of posting a .com binary -- how did you
generate it?
Herbert Kleebauer
It's not cool for posting but for including binaries within batch files.
The first two lines are a hand written decoding routine using only
opcodes in the ascii range. The remaining lines are the encoded
user program.