You cannot post messages because this group is only available as an archive.
|
Broadcom tg3 parameter for RH Linux
|
| |
I am looking for the parameter to be place in modules.conf to setup this nic as 100 Full, and disable auto-neg, but seems cannot find it anywhere. Is there anyone know what's the paramter to do so? I am running RH Linx 8 on Dell PowerEdge 2650. Thanks. Bosco
|
|
|
Can't ping IPv6 domains
|
| |
I am trying to setup my RedHat 9 with 2.4.20-28.9 kernel to connect to IPv6 domains. The ipv6 module is loaded at boot but I can't ping6 any IPv6 domains. My D-Link DFE-530TX+ NIC is connected to a cable modem. Not knowing what might be helpful I've included everything I could find. I will provide any additional information that you need to provide suggestions.... more »
|
|
|
Help Printing from WinXP to Fedora via SAMBA
|
| |
I am running Fedora core 1 on my desktop and WinXP on a notebook. I am able to share files between the 2 machines just fine. I am having trouble printing from the WinXP machine thru SAMBA. With my current smb.conf file I am able to (seemingly) install the network printers on WinXP (they are physically connected to the desktop) but when I go to print nothing... more »
|
|
|
Help printing from WinXP to Linux via Samba...PLEASE :)
|
| |
OK, I have set up my network to make Fedora my server. My wife's laptop is running WinXP Home. I am able to see each computer from the other computer and can share files. I also am able to install the two printers that are physically connected to the Linux box onto the WinXP box. I am not able,... more »
|
|
|
DOS MS Client v3 and EFG80
|
| |
Hi All. Hope someone can provide a solution for a problem I'm having with my LinkSys EFG80 NAS. The device works great when used as a file server in a home and small office network with Windows 95 on up to Windows 2003 servers and Linux workstations, however whenever I attempt to boot a workstation client from a network boot disk w/ MSClient for DOS v3(MSDOS 5 on up), it... more »
|
|
|
Wireless under Redhat 9.0 and Slackware 9.0
|
| |
As are most others in the Linux community, I'm tired of jacking around with hardware vendors who refuse to support their products with Linux drivers. I have an Intel Pro 2100 in my Toshiba laptop and D-Link Air Extreme in my desktop both of which have no drivers (not that I can find at least) for operation under Linux. Does anybody have a suggestion for... more »
|
|
|
SIS900 00:00:00:00:00:00 MAC solution
|
| |
Hello World, Haven't make NNTP posting for a long time... Anyways, I was trying to get Slackware 9.0 to run on a P4 motherboard with NIC onboard.. Slackware detected the NIC and use SIS900.o. However upon reboot, I notice the MAC address looks very wrong -> 00:00:00:00:00:00. Interesting enough, if I... more »
|
|
|
Devon Anal 2956
|
| |
...Probably contains a worm, and has been sent to the postmaster to be dealt with appropriately.
|
|
|
Setting up a firewall: Need for advice.
|
| |
Hi, I would like to use Linux as a firewall for a small 35 computers network (mainly Macintoshes). Is it possible with one of the available flavors of Linux (Suse, Debian, Red Hat, etc.) to create a firewall with the following requirements: - Connection to 2 ADSL modems or 2 cable modems or even one of both (1 ADSL... more »
|
|
|
