Limit fax speed
* Tong *
I need to limit the fax speed to 9600 bps with my 56k
winmodem. How can I do that?
FYI,
First, my modem is working fine. I've been using it to dial into
my Internet. Next, I've done an extensive search on google. The
closet I managed to find is the following, "What Speed Should I
Use with My Modem"
http://www.tldp.org/HOWTO/Modem-HOWTO-14.html
,-----
| This DTE (PC-to-modem) speed is normally set by a menu in your
| communications program or by an option given to the getty command
| if someone is dialing in. You can't set the DCE modem-to-modem
| speed since this is set automatically by the modem to the highest
| feasible speed after negotiation with the other modem. Well,
| actually you can set the modem-to-modem speed with the S37
| register but you shouldn't do it.
`-----
second, here is the log when I receive fax with efax:
- - - - >8 - - - -
efax: 34:35 opened /dev/modem
efax: 34:35 Warning: unexpected response "ERROR"
efax: 34:35 Warning: unexpected response "ERROR"
[...]
efax: 34:35 Warning: unexpected response "ERROR"
efax: 34:38 using PCtel HSP56 MicroModem Linux Driver K2.4.7.V92.001 (03/26/2003) in class 1
efax: 34:46 fax call answered
efax: 34:46 sent CSI - answering ID
efax: 34:47 sent DIS - answering capabilities
efax: 34:53 Warning: timed out after waiting
efax: 34:53 sent CSI - answering ID
efax: 34:55 sent DIS - answering capabilities
efax: 35:01 Warning: timed out after waiting
efax: 35:01 sent CSI - answering ID
efax: 35:02 sent DIS - answering capabilities
efax: 35:08 Warning: timed out after waiting
efax: 35:08 sent CSI - answering ID
efax: 35:10 sent DIS - answering capabilities
efax: 35:16 Warning: wrong response after waiting
efax: 35:16 sent CSI - answering ID
efax: 35:17 sent DIS - answering capabilities
efax: 35:23 Warning: timed out after waiting
efax: 35:23 Error: no command/response from remote
efax: 35:23 sent DCN - disconnect
efax: 35:25 done, returning 3 (invalid modem response)
- - - - >8 - - - -
and finally, this is the efax log for sending.
- - - - >8 - - - -
efax: 56:21 opened /dev/modem
efax: 56:22 using PCtel HSP56 MicroModem Linux Driver K2.4.7.V92.001 (03/26/2003) in class 1
efax: 56:22 dialing T...
efax: 56:34 connected
efax: 56:35 Warning: bit-reversed HDLC frame, reversing bit order
efax: 56:35 received CSI - answering ID
efax: 56:35 remote ID -> ...
efax: 56:36 received DIS - answering capabilities
efax: 56:36 remote has no document(s) to send, and can receive
efax: 56:36 local 196lpi 14.4kbps 8.5"/215mm any 1D - - 0ms
efax: 56:36 remote 196lpi 14.4kbps 8.5"/215mm any 2D ECM-64 - 0ms
efax: 56:36 session 196lpi 14.4kbps 8.5"/215mm any 1D - - 0ms
efax: 56:36 sent TSI - caller ID
efax: 56:38 sent DCS - session format
efax: 56:41 Error: wrong response after waiting
efax: 56:41 sent TCF - channel check of 2700 bytes
efax: 56:41 local 196lpi 14.4kbps 8.5"/215mm any 1D - - 0ms
efax: 56:41 remote 196lpi 14.4kbps 8.5"/215mm any 2D ECM-64 - 0ms
efax: 56:41 session 196lpi 14.4kbps 8.5"/215mm any 1D - - 0ms
efax: 56:41 local 196lpi 14.4kbps 8.5"/215mm any 1D - - 0ms
efax: 56:41 remote 196lpi 14.4kbps 8.5"/215mm any 2D ECM-64 - 0ms
efax: 56:41 session 196lpi 14.4kbps 8.5"/215mm any 1D - - 0ms
efax: 56:41 Error: no command/response from remote
efax: 56:41 sent DCN - disconnect
efax: 56:43 failed -> fax1.001
efax: 56:43 done, returning 3 (invalid modem response)
- - - - >8 - - - -
Sorry, it is a bit busy. You can see that I just have no idea what to
check.
Thanks!
--
Tong (remove underscore(s) to reply)
*niX Power Tools Project: http://xpt.sourceforge.net/
- All free contribution & collection