Printing from Windows to a CUPS printer
kali...@btinternet.com
my printer is on my linux machine using CUPS.
how do i print from my windows 2000 machine to it ?
I would be keen to know the CUPS/IPP way rather than using samba.
esste...@worldbadminton.com
: Printing from Windows to a CUPS printer
: my printer is on my linux machine using CUPS.
: how do i print from my windows 2000 machine to it ?
: I would be keen to know the CUPS/IPP way rather than using samba.
Haven't played with it, but in principle it "jsut works".
i.e. share the printer in CUPS (this may be automatic
or manually config'd depending upon your installtion).
wander by Windows and attach to it as with any other
shared network printer. You'll want the Windows print
driver for your printer of course.
Stan
--
Stan Bischof ("stan" at the below domain)
www.worldbadminton.com
esste...@worldbadminton.com
: Printing from Windows to a CUPS printer
: my printer is on my linux machine using CUPS.
: how do i print from my windows 2000 machine to it ?
: I would be keen to know the CUPS/IPP way rather than using samba.
I should insert a related note---
For a very small amount these days you can buy a print
server. This is a small box- about the size of a network switch-
that serves your printer to a network.
In your case that would mean that you don't need your Linux
box to be up and running to print from Windows. Very nice
when you have multiple machines. And they draw very little
power and are silent so you can leave them on.
These attach to parallel and USB printers and are very easy
to configure.
Bill Unruh
>Printing from Windows to a CUPS printer
>my printer is on my linux machine using CUPS.
Enable cups-lpd on the linux machine ( /etc/xinetd.d/cups-lpd) and then
tell the windows printer to print to an lpd printer.
Rod Smith
"kali...@btinternet.com" <kali...@btinternet.com> writes:
>
> my printer is on my linux machine using CUPS.
>
> how do i print from my windows 2000 machine to it ?
>
> I would be keen to know the CUPS/IPP way rather than using samba.
A Google on "Windows IPP printing" turned up some interesting links:
http://solutions.brother.com/Library/sol/printer/pc_ipp_w2k.html
http://www.digitalissues.co.uk/html/os/ms/ipp.html
http://www.microsoft.com/windowsserver2003/techinfo/overview/internetprint.mspx
I've not done this, though (I'm still using Samba for this task), so I
can't give you any firsthand advice.
--
Rod Smith, rods...@rodsbooks.com
http://www.rodsbooks.com
Author of books on Linux, FreeBSD, and networking
kali...@btinternet.com
I got it working,
I installed Print Services for Unix on the win2k machine (under networking
services in add/remove windows programs)
I edited the /etc/cups/cupsd.conf file and made these changes
I commented this line out
Listen 127.0.0.1:631
and added this line instead
Port 631
changed the following
## Restrict access to local domain
Order Deny,Allow
Deny From All
Allow From 127.0.0.1
to
## Restrict access to local domain
Order Deny,Allow
Allow From All
Allow From 127.0.0.1
I then restarted the cups server
/etc/init.d/cups restart
ON the windows PC when I added the printer I chose to add a new port of type
LPR. I then entered the linux PC's IP and the print queue name.
and it worked.
David Efflandt
Windows does not know specifically what ipp:// is, but you can (at least
in XP) configure a "network" printing port for what Win calls Internet
Printing, and use a URL of http://cups_server_name_or_IP:631/queuename
(port 631 is the ipp port used by cups).
Or at least that works to my Linksys EFSP42 switch/printserver (which I
did not even know did ipp until I port scanned it and tried it). But the
EFSP42 supports about every other printing protocol too, including lpr
(which for NT/XP would be a "local" TCP printing port). Cups can also act
like an lpd for lpr printing.
kali...@btinternet.com
> On Fri, 11 Feb 2005, kali...@btinternet.com <kali...@btinternet.com>
> wrote:
>> Printing from Windows to a CUPS printer
>>
>> my printer is on my linux machine using CUPS.
>>
>> how do i print from my windows 2000 machine to it ?
>>
>> I would be keen to know the CUPS/IPP way rather than using samba.
>
> Windows does not know specifically what ipp:// is, but you can (at least
> in XP) configure a "network" printing port for what Win calls Internet
> Printing, and use a URL of http://cups_server_name_or_IP:631/queuename
> (port 631 is the ipp port used by cups).
>
when i try this i get Error ACcess Denied.
there must be something in the cupsd.conf file which is causing this .
anyone got any ideas ?
bigbob
what was the exact url you entered on the windows machine? I'm confused as
to what to enter for the queue name.
Bigbob
kali...@btinternet.com
hi Bigbob what I got working above was actually lpd printing not CUPS/IPP.
For CUPS I basically used the following as the URL on the windows PC
http://rita:631/printers/epson
where rita is the server name and epson is the queue on that server and
printers is part of the CUPS syntax and 631 is the default TCP port for
CUPS (nmap localhost will confirm this)
the queue has to be created using system-config-printer and then shared out
using that tool also.
dont use the web management tool (http://localhost:631) as it wont work
any questions please ask as I feel like I have a good grasp of whats going
on here.
bigbob
OK. got it to connect to the printer, but I can't get past the security
options. No combination of user/pass will work. I changed the cupsd.conf
as described above, but it still won't let me have access to the printer.
Bigbob
kali...@btinternet.com
here is my CUPS file. ill probably get roasted for posting it as it is
nothing special., but it works. make sure you back up your own b4 you try
it.
#
# "$Id: cupsd.conf.in,v 1.13 2003/04/10 20:14:04 mike Exp $"
#
# Sample configuration file for the Common UNIX Printing System (CUPS)
# scheduler.
#
# Copyright 1997-2003 by Easy Software Products, all rights reserved.
#
# These coded instructions, statements, and computer programs are the
# property of Easy Software Products and are protected by Federal
# copyright law. Distribution and use rights are outlined in the file
# "LICENSE.txt" which should have been included with this file. If this
# file is missing or damaged please contact Easy Software Products
# at:
#
# Attn: CUPS Licensing Information
# Easy Software Products
# 44141 Airport View Drive, Suite 204
# Hollywood, Maryland 20636-3111 USA
#
# Voice: (301) 373-9603
# EMail: cups...@cups.org
# WWW: http://www.cups.org
#
########################################################################
# #
# This is the CUPS configuration file. If you are familiar with #
# Apache or any of the other popular web servers, we've followed the #
# same format. Any configuration variable used here has the same #
# semantics as the corresponding variable in Apache. If we need #
# different functionality then a different name is used to avoid #
# confusion... #
# #
########################################################################
########
######## Server Identity
########
#
# ServerName: the hostname of your server, as advertised to the world.
# By default CUPS will use the hostname of the system.
#
# To set the default server used by clients, see the client.conf file.
#
#ServerName myhost.domain.com
#
# ServerAdmin: the email address to send all complaints/problems to.
# By default CUPS will use "root@hostname".
#
#ServerAdmin ro...@your.domain.com
########
######## Server Options
########
#
# AccessLog: the access log file; if this does not start with a leading /
# then it is assumed to be relative to ServerRoot. By default set to
# "/var/log/cups/access_log"
#
# You can also use the special name "syslog" to send the output to the
# syslog file or daemon.
#
#AccessLog /var/log/cups/access_log
#
# Classification: the classification level of the server. If set, this
# classification is displayed on all pages, and raw printing is disabled.
# The default is the empty string.
#
#Classification classified
#Classification confidential
#Classification secret
#Classification topsecret
#Classification unclassified
#
# ClassifyOverride: whether to allow users to override the classification
# on printouts. If enabled, users can limit banner pages to before or
# after the job, and can change the classification of a job, but cannot
# completely eliminate the classification or banners.
#
# The default is off.
#
#ClassifyOverride off
#
# DataDir: the root directory for the CUPS data files.
# By default "/usr/share/cups".
#
#DataDir /usr/share/cups
#
# DefaultCharset: the default character set to use. If not specified,
# defaults to "utf-8". Note that this can also be overridden in
# HTML documents...
#
#DefaultCharset utf-8
#
# DefaultLanguage: the default language if not specified by the browser.
# If not specified, the current locale is used.
#
#DefaultLanguage en
#
# DocumentRoot: the root directory for HTTP documents that are served.
# By default "/usr/share/doc/cups-1.1.20".
#
#DocumentRoot /usr/share/doc/cups-1.1.20
#
# ErrorLog: the error log file; if this does not start with a leading /
# then it is assumed to be relative to ServerRoot. By default set to
# "/var/log/cups/error_log"
#
# You can also use the special name "syslog" to send the output to the
# syslog file or daemon.
#
#ErrorLog /var/log/cups/error_log
#
# FileDevice: determines whether the scheduler will allow new printers
# to be added using device URIs of the form "file:/foo/bar". The default
# is not to allow file devices due to the potential security vulnerability
# and due to the fact that file devices do not support raw printing.
#
#FileDevice No
#
# FontPath: the path to locate all font files (currently only for
pstoraster)
# By default "/usr/share/cups/fonts".
#
#FontPath /usr/share/cups/fonts
#
# LogLevel: controls the number of messages logged to the ErrorLog
# file and can be one of the following:
#
# debug2 Log everything.
# debug Log almost everything.
# info Log all requests and state changes.
# warn Log errors and warnings.
# error Log only errors.
# none Log nothing.
#
LogLevel info
#
# MaxLogSize: controls the maximum size of each log file before they are
# rotated. Defaults to 1048576 (1MB). Set to 0 to disable log rotating.
#
MaxLogSize 0
#
# PageLog: the page log file; if this does not start with a leading /
# then it is assumed to be relative to ServerRoot. By default set to
# "/var/log/cups/page_log"
#
# You can also use the special name "syslog" to send the output to the
# syslog file or daemon.
#
#PageLog /var/log/cups/page_log
#
# PreserveJobHistory: whether or not to preserve the job history after a
# job is completed, cancelled, or stopped. Default is Yes.
#
#PreserveJobHistory Yes
#
# PreserveJobFiles: whether or not to preserve the job files after a
# job is completed, cancelled, or stopped. Default is No.
#
#PreserveJobFiles No
#
# AutoPurgeJobs: automatically purge jobs when not needed for quotas.
# Default is No.
#
#AutoPurgeJobs No
#
# MaxCopies: maximum number of copies that a user can request. Default is
# 100.
#
#MaxCopies 100
#
# MaxJobs: maximum number of jobs to keep in memory (active and completed.)
# Default is 500; the value 0 is used for no limit.
#
#MaxJobs 500
#
# MaxJobsPerPrinter: maximum number of active jobs per printer. The default
# is 0 for no limit.
#
#MaxJobsPerPrinter 0
#
# MaxJobsPerUser: maximum number of active jobs per user. The default
# is 0 for no limit.
#
#MaxJobsPerUser 0
#
# MaxPrinterHistory: controls the maximum number of history collections
# in the printer-state-history attribute. Set to 0 to disable history
# data.
#
#MaxPrinterHistory 10
#
# Printcap: the name of the printcap file. Default is /etc/printcap.
# Leave blank to disable printcap file generation.
#
Printcap /etc/printcap
#
# PrintcapFormat: the format of the printcap file, currently either
# BSD or Solaris. The default is "BSD".
#
#PrintcapFormat BSD
#PrintcapFormat Solaris
#
# PrintcapGUI: the name of the GUI options panel program to associate
# with print queues under IRIX. The default is "/usr/bin/glpoptions"
# from ESP Print Pro.
#
# This option is only used under IRIX; the options panel program
# must accept the "-d printer" and "-o options" options and write
# the selected printer options back to stdout on completion.
#
#PrintcapGUI /usr/bin/glpoptions
#
# RequestRoot: the directory where request files are stored.
# By default "/var/spool/cups".
#
#RequestRoot /var/spool/cups
#
# RemoteRoot: the name of the user assigned to unauthenticated accesses
# from remote systems. By default "remroot".
#
#RemoteRoot remroot
#
# ServerBin: the root directory for the scheduler executables.
# By default "/usr/lib/cups".
#
#ServerBin /usr/lib/cups
#
# ServerRoot: the root directory for the scheduler.
# By default "/etc/cups".
#
#ServerRoot /etc/cups
########
######## Fax Support
########
#
# FaxRetryLimit: the number of times a fax job is retried.
# The default is 5 times.
#
#FaxRetryLimit 5
#
# FaxRetryInterval: the number of seconds between fax job retries.
# The default is 300 seconds/5 minutes.
#
#FaxRetryInterval 300
########
######## Encryption Support
########
#
# ServerCertificate: the file to read containing the server's certificate.
# Defaults to "/etc/cups/ssl/server.crt".
#
#ServerCertificate /etc/cups/ssl/server.crt
#
# ServerKey: the file to read containing the server's key.
# Defaults to "/etc/cups/ssl/server.key".
#
#ServerKey /etc/cups/ssl/server.key
########
######## Filter Options
########
#
# User/Group: the user and group the server runs under. Normally this
# must be lp and sys, however you can configure things for another
# user or group as needed.
#
# Note: the server must be run initially as root to support the
# default IPP port of 631. It changes users whenever an external
# program is run, or if the RunAsUser directive is specified...
#
#User lp
#Group sys
#
# RIPCache: the amount of memory that each RIP should use to cache
# bitmaps. The value can be any real number followed by "k" for
# kilobytes, "m" for megabytes, "g" for gigabytes, or "t" for tiles
# (1 tile = 256x256 pixels.) Defaults to "8m" (8 megabytes).
#
#RIPCache 8m
#
# TempDir: the directory to put temporary files in. This directory must be
# writable by the user defined above! Defaults to "/var/spool/cups/tmp" or
# the value of the TMPDIR environment variable.
#
#TempDir /var/spool/cups/tmp
#
# FilterLimit: sets the maximum cost of all job filters that can be run
# at the same time. A limit of 0 means no limit. A typical job may need
# a filter limit of at least 200; limits less than the minimum required
# by a job force a single job to be printed at any time.
#
# The default limit is 0 (unlimited).
#
#FilterLimit 0
########
######## Network Options
########
#
# Ports/addresses that we listen to. The default port 631 is reserved
# for the Internet Printing Protocol (IPP) and is what we use here.
#
# You can have multiple Port/Listen lines to listen to more than one
# port or address, or to restrict access:
#
# Port 80
# Port 631
# Listen hostname
# Listen hostname:80
# Listen hostname:631
# Listen 1.2.3.4
# Listen 1.2.3.4:631
#
# NOTE: Unfortunately, most web browsers don't support TLS or HTTP Upgrades
# for encryption. If you want to support web-based encryption you'll
# probably need to listen on port 443 (the "https" port...)
#
#Port 80
#Port 443
#
# HostNameLookups: whether or not to do lookups on IP addresses to get a
# fully-qualified hostname. This defaults to Off for performance reasons...
#
#HostNameLookups On
#
# KeepAlive: whether or not to support the Keep-Alive connection
# option. Default is on.
#
#KeepAlive On
#
# KeepAliveTimeout: the timeout before Keep-Alive connections are
# automatically closed. Default is 60 seconds.
#
#KeepAliveTimeout 60
#
# MaxClients: controls the maximum number of simultaneous clients that
# will be handled. Defaults to 100.
#
#MaxClients 100
#
# MaxClientsPerHost: controls the maximum number of simultaneous clients
that
# will be handled from a specific host. Defaults to 10 or 1/10th of the
# MaxClients setting, whichever is larger. A value of 0 specifies the
# automatic (10 or 1/10th) setting.
#
#MaxClientsPerHost 0
#
# MaxRequestSize: controls the maximum size of HTTP requests and print
files.
# Set to 0 to disable this feature (defaults to 0.)
#
#MaxRequestSize 0
#
# Timeout: the timeout before requests time out. Default is 300 seconds.
#
#Timeout 300
########
######## Browsing Options
########
#
# Browsing: whether or not to broadcast and/or listen for CUPS printer
# information on the network. Enabled by default.
#
#Browsing On
#
# BrowseProtocols: which protocols to use for browsing. Can be
# any of the following separated by whitespace and/or commas:
#
# all - Use all supported protocols.
# cups - Use the CUPS browse protocol.
# slp - Use the SLPv2 protocol.
#
# The default is "cups".
#
# NOTE: If you choose to use SLPv2, it is *strongly* recommended that
# you have at least one SLP Directory Agent (DA) on your
# network. Otherwise, browse updates can take several seconds,
# during which the scheduler will not respond to client
# requests.
#
#BrowseProtocols cups
#
# BrowseAddress: specifies a broadcast address to be used. By
# default browsing information is not sent!
#
# Note: HP-UX does not properly handle broadcast unless you have a
# Class A, B, C, or D netmask (i.e. no CIDR support).
#
# Note: Using the "global" broadcast address (255.255.255.255) will
# activate a Linux demand-dial link with the default configuration.
# If you have a LAN as well as the dial-up link, use the LAN's
# broadcast address.
#
# The @LOCAL address broadcasts to all non point-to-point interfaces.
# For example, if you have a LAN and a dial-up link, @LOCAL would
# send printer updates to the LAN but not to the dial-up link.
# Similarly, the @IF(name) address sends to the named network
# interface, e.g. @IF(eth0) under Linux. Interfaces are refreshed
# automatically (no more than once every 60 seconds), so they can
# be used on dynamically-configured interfaces, e.g. PPP, 802.11, etc.
#
#BrowseAddress x.y.z.255
#BrowseAddress x.y.255.255
#BrowseAddress x.255.255.255
#BrowseAddress 255.255.255.255
#BrowseAddress @LOCAL
#BrowseAddress @IF(name)
#
# BrowseShortNames: whether or not to use "short" names for remote printers
# when possible (e.g. "printer" instead of "printer@host".) Enabled by
# default.
#
#BrowseShortNames Yes
#
# BrowseAllow: specifies an address mask to allow for incoming browser
# packets. The default is to allow packets from all addresses.
#
# BrowseDeny: specifies an address mask to deny for incoming browser
# packets. The default is to deny packets from no addresses.
#
# Both "BrowseAllow" and "BrowseDeny" accept the following notations for
# addresses:
#
# All
# None
# *.domain.com
# .domain.com
# host.domain.com
# nnn.*
# nnn.nnn.*
# nnn.nnn.nnn.*
# nnn.nnn.nnn.nnn
# nnn.nnn.nnn.nnn/mm
# nnn.nnn.nnn.nnn/mmm.mmm.mmm.mmm
# @LOCAL
# @IF(name)
#
# The hostname/domainname restrictions only work if you have turned hostname
# lookups on!
#
#BrowseAllow address
#BrowseDeny address
#
# BrowseInterval: the time between browsing updates in seconds. Default
# is 30 seconds.
#
# Note that browsing information is sent whenever a printer's state changes
# as well, so this represents the maximum time between updates.
#
# Set this to 0 to disable outgoing broadcasts so your local printers are
# not advertised but you can still see printers on other hosts.
#
#BrowseInterval 30
#
# BrowseOrder: specifies the order of BrowseAllow/BrowseDeny comparisons.
#
#BrowseOrder allow,deny
#BrowseOrder deny,allow
#
# BrowsePoll: poll the named server(s) for printers
#
#BrowsePoll address:port
#
# BrowsePort: the port used for UDP broadcasts. By default this is
# the IPP port; if you change this you need to do it on all servers.
# Only one BrowsePort is recognized.
#
#BrowsePort 631
#
# BrowseRelay: relay browser packets from one address/network to another.
#
#BrowseRelay source-address destination-address
#BrowseRelay @IF(src) @IF(dst)
#
# BrowseTimeout: the timeout for network printers - if we don't
# get an update within this time the printer will be removed
# from the printer list. This number definitely should not be
# less the BrowseInterval value for obvious reasons. Defaults
# to 300 seconds.
#
#BrowseTimeout 300
#
# ImplicitClasses: whether or not to use implicit classes.
#
# Printer classes can be specified explicitly in the classes.conf
# file, implicitly based upon the printers available on the LAN, or
# both.
#
# When ImplicitClasses is On, printers on the LAN with the same name
# (e.g. Acme-LaserPrint-1000) will be put into a class with the same
# name. This allows you to setup multiple redundant queues on a LAN
# without a lot of administrative difficulties. If a user sends a
# job to Acme-LaserPrint-1000, the job will go to the first available
# queue.
#
# Enabled by default.
#
#ImplicitClasses On
#
# ImplicitAnyClasses: whether or not to create "AnyPrinter" implicit
# classes.
#
# When ImplicitAnyClasses is On and a local queue of the same name
# exists, e.g. "printer", "printer@server1", "printer@server1", then
# an implicit class called "Anyprinter" is created instead.
#
# When ImplicitAnyClasses is Off, implicit classes are not created
# when there is a local queue of the same name.
#
# Disabled by default.
#
#ImplicitAnyCLasses Off
#
# HideImplicitMembers: whether or not to show the members of an
# implicit class.
#
# When HideImplicitMembers is On, any remote printers that are
# part of an implicit class are hidden from the user, who will
# then only see a single queue even though many queues will be
# supporting the implicit class.
#
# Enabled by default.
#
#HideImplicitMembers On
########
######## Security Options
########
#
# SystemGroup: the group name for "System" (printer administration)
# access. The default varies depending on the operating system, but
# will be "sys", "system", or "root" (checked for in that order.)
#
#SystemGroup sys
#
# RootCertDuration: How frequently the root certificate is regenerated.
# Defaults to 300 seconds.
#
#RootCertDuration 300
#
# Access permissions for each directory served by the scheduler.
# Locations are relative to DocumentRoot...
#
# AuthType: the authorization to use:
#
# None - Perform no authentication
# Basic - Perform authentication using the HTTP Basic method.
# Digest - Perform authentication using the HTTP Digest method.
#
# (Note: local certificate authentication can be substituted by
# the client for Basic or Digest when connecting to the
# localhost interface)
#
# AuthClass: the authorization class; currently only "Anonymous", "User",
# "System" (valid user belonging to group SystemGroup), and "Group"
# (valid user belonging to the specified group) are supported.
#
# AuthGroupName: the group name for "Group" authorization.
#
# Order: the order of Allow/Deny processing.
#
# Allow: allows access from the specified hostname, domain, IP address,
# network, or interface.
#
# Deny: denies access from the specified hostname, domain, IP address,
# network, or interface.
#
# Both "Allow" and "Deny" accept the following notations for addresses:
#
# All
# None
# *.domain.com
# .domain.com
# host.domain.com
# nnn.*
# nnn.nnn.*
# nnn.nnn.nnn.*
# nnn.nnn.nnn.nnn
# nnn.nnn.nnn.nnn/mm
# nnn.nnn.nnn.nnn/mmm.mmm.mmm.mmm
# @LOCAL
# @IF(name)
#
# The host and domain address require that you enable hostname lookups
# with "HostNameLookups On" above.
#
# The @LOCAL address allows or denies from all non point-to-point
# interfaces. For example, if you have a LAN and a dial-up link,
# @LOCAL could allow connections from the LAN but not from the dial-up
# link. Similarly, the @IF(name) address allows or denies from the
# named network interface, e.g. @IF(eth0) under Linux. Interfaces are
# refreshed automatically (no more than once every 60 seconds), so
# they can be used on dynamically-configured interfaces, e.g. PPP,
# 802.11, etc.
#
# Encryption: whether or not to use encryption; this depends on having
# the OpenSSL library linked into the CUPS library and scheduler.
#
# Possible values:
#
# Always - Always use encryption (SSL)
# Never - Never use encryption
# Required - Use TLS encryption upgrade
# IfRequested - Use encryption if the server requests it
#
# The default value is "IfRequested".
#
#<Location /classes>
#
# You may wish to limit access to printers and classes, either with Allow
# and Deny lines, or by requiring a username and password.
#
#</Location>
#<Location /classes/name>
#
# You may wish to limit access to printers and classes, either with Allow
# and Deny lines, or by requiring a username and password.
#
#</Location>
#<Location /jobs>
#
# You may wish to limit access to job operations, either with Allow
# and Deny lines, or by requiring a username and password.
#
#</Location>
#<Location /printers>
#
# You may wish to limit access to printers and classes, either with Allow
# and Deny lines, or by requiring a username and password.
#
#</Location>
#<Location /printers/name>
#
# You may wish to limit access to printers and classes, either with Allow
# and Deny lines, or by requiring a username and password.
#
## Anonymous access (default)
#AuthType None
## Require a username and password (Basic authentication)
#AuthType Basic
#AuthClass User
## Require a username and password (Digest/MD5 authentication)
#AuthType Digest
#AuthClass User
## Restrict access to local domain
#Order Deny,Allow
#Deny From All
#Allow From .mydomain.com
#</Location>
<Location /admin>
#
# You definitely will want to limit access to the administration functions.
# The default configuration requires a local connection from a user who
# is a member of the system group to do any admin tasks. You can change
# the group name using the SystemGroup directive.
#
AuthType Basic
AuthClass System
## Restrict access to local domain
Order Deny,Allow
Deny From All
Allow From 127.0.0.1
#Encryption Required
</Location>
#
# End of "$Id: cupsd.conf.in,v 1.13 2003/04/10 20:14:04 mike Exp $".
#
# Lines below are automatically generated - DO NOT EDIT
<Location /printers/epson>
Order Deny,Allow
Deny From All
Allow From 127.0.0.1
AuthType None
Allow from All
</Location>
<Location /printers/ipp>
Order Deny,Allow
Deny From All
Allow From 127.0.0.1
AuthType None
</Location>
<Location />
Order Deny,Allow
Deny From All
Allow From 127.0.0.1
</Location>
Browsing On
BrowseProtocols cups
BrowseOrder Deny,Allow
BrowseAllow from @LOCAL
BrowseAddress 255.255.255.255
Listen *:631
General Schvantzkoph
You can use SAMBA to share the printer with your Windows machines. The
printer will look like any other Windows printer, the Windoze boxes don't
need to know anything about CUPS.
bigbob
Samba is extreamly slow from my XP box. Don't know if the other is any
faster, but it's worth a try.
Bigbo
kali...@btinternet.com
I think its nice to try out all the options and see whats best,
Ive got LPD and CUPS/IPP working so next ill try Samba.
I already have a solid samba config on this machine so it should be
straightforward.
As bob said doesnt Samba just pass off the request to CUPS and therefore is
bound to be slower ?
kali...@btinternet.com
I just set up a basic Samba config on my machine using the following
[global]
load printers = yes
printing = cups
printcap name = cups
[printers]
comment = All Printers
path = /var/spool/samba
browseable = yes
public = yes
guest ok = yes
writable = no
printable = yes
printer admin = root, @ntadmins
It is a bit slower than using CUPS/IPP or LPD.
Rod Smith
"kali...@btinternet.com" <kali...@btinternet.com> writes:
>
> I edited the /etc/cups/cupsd.conf file and made these changes
> changed the following
>
> ## Restrict access to local domain
> Order Deny,Allow
> Deny From All
> Allow From 127.0.0.1
>
> to
>
> ## Restrict access to local domain
> Order Deny,Allow
> Allow From All
> Allow From 127.0.0.1
This particular change is potentially dangerous. The "Allow From All"
line tells CUPS to accept external connections from *ANY* source. I'd
suggest changing "All" to your subnet's IP address range, such as "Allow
From 192.168.1.0/24", or to specify individual authorized clients by IP
address.
Of course, this isn't such a big problem if your system is behind a NAT
router or if it isn't connected at all to the Internet. Still, it's
conceivable a NAT router could be misconfigured to pass through IPP
requests, so best to play it safe.
Timothy Murphy
General Schvantzkoph wrote:
> You can use SAMBA to share the printer with your Windows machines. The
> printer will look like any other Windows printer, the Windoze boxes don't
> need to know anything about CUPS.
Assuming you have done this,
what exactly did you do on the Windows machine
and on the Linux machine?
--
Timothy Murphy
e-mail (<80k only): tim /at/ birdsnest.maths.tcd.ie
tel: +353-86-2336090, +353-1-2842366
s-mail: School of Mathematics, Trinity College, Dublin 2, Ireland
kali...@btinternet.com
> <posted & mailed>
>
> General Schvantzkoph wrote:
>
>> You can use SAMBA to share the printer with your Windows machines. The
>> printer will look like any other Windows printer, the Windoze boxes don't
>> need to know anything about CUPS.
>
> Assuming you have done this,
> what exactly did you do on the Windows machine
> and on the Linux machine?
>
Tim
I setup CUPS/IPP and SAMBA yesterday.
First setup the CUPS/IPP printer using system-config-printer (on Fedora Core
that is) .
You may have to use another wizard on your distro.
Dont use the web interface (localhost:631) .
Make sure to share it out and give appropriate access to the relevant hosts.
Add this to your smb.conf file
[global]
# printing is controlled by CUPS
load printers = yes
printing = cups
printcap name = cups
[printers]
comment = All Printers
path = /var/spool/samba
browseable = yes
public = yes
guest ok = yes
writable = no
printable = yes
printer admin = root, @ntadmins
then on the windows box sinply browse for the new printer and you should
find it.
I am assuming that you have Samba already setup and working ?
If not you will have to make sure that you are authenticated to the
linux/samba server. I simply map a drive using a linux/samba user account
and then browse for the printer using my computer .
ps
what field of mathematics do you pursue ?