Turning OFF SoundBlaster

[G. Vitillaro]

I would like to resubmit to a larger number of
groups (got no answers until now) a question
about turning off the AdLib latches of SoundBlaster.

Please if you have any idead about my question
drop an e-mail to <pe...@unipg.it>. Thanks. Peppe.

====================================================

I'm facing the problem to let SoundBlaster Pro
and an (old) IBM MultiProtocol SDLC card to coexist
on the same ISA bus.

The AdLib SoundBlaster interface use the I/O ports
0x388-0x39F and the IBM MP use the I/O ports
0x380-0x38C.

Both cards cannot be configured (at least from
the tech specs I have in habd) for these ports.

What I'm looking for is some (undocumneted) jumper
of SB that make possible to exclude the AdLib I/O
addresses or a piece of code that may turn OFF
the SB without taking it off from the BUS.

The IBM MP cannot be configured at all, so
the only hope is in the SB.

Please send answers to my e-mail address
(pe...@unipg.it) as we have a considerable
delay in the news feed and I don't follow
regularly this group.

Thank. Peppe.
--
Giuseppe Vitillaro - IBM SEMEA | E-Mail : pe...@unipg.it
University of Perugia Italy | 06124 Perugia Phone:+39.75.585-2799
---------------------------------------------------------------------------
All comments/opinions are mine and don't represent those of IBM