Sharp?
--
mfG,
Jochen Schmidt
This is the `hash' symbol and makes #! at the start of a shell script
`hash bang'.
Cheers,
:) will
Sent via Deja.com http://www.deja.com/
Before you buy.
Hash
- n
Cancelletto? Diesis? :)
--
Marco Antoniotti ===========================================
PARADES, Via San Pantaleo 66, I-00186 Rome, ITALY
tel. +39 - 06 68 10 03 17, fax. +39 - 06 68 80 79 26
http://www.parades.rm.cnr.it/~marcoxa
in the ANSI standard, it is called "number sign", which is the official
nomenclature of the standards bodies, or "sharpsign".
#:Erik
> In the context of lisp, what is the pronunciation of the #
> symbol? That is, what do you call it?
I've always called it (and heard it called around me) "sharpsign".
OK, I think the only term not listed so far is 'pound sign', which apparently
is/was also used. Pretty confusingly, I'd say. The only connection I can see
is that shift-3 usually correponds to '#', whereas on British keyboards
shift-3 is Ł (i.e. the stylized L currency symbol) ... ah well,
Philip
--
Not getting what you want is sometimes a wonderful stroke of luck.
-----------------------------------------------------------------------------
Philip Lijnzaad, lijn...@ebi.ac.uk | European Bioinformatics Institute,rm A2-24
+44 (0)1223 49 4639 | Wellcome Trust Genome Campus, Hinxton
+44 (0)1223 49 4468 (fax) | Cambridgeshire CB10 1SD, GREAT BRITAIN
PGP fingerprint: E1 03 BF 80 94 61 B6 FC 50 3D 1F 64 40 75 FB 53
> In the context of lisp, what is the pronunciation of the #
> symbol? That is, what do you call it?
I never called it!
--
Fernando D. Mato Mira
Real-Time SW Eng & Networking
Advanced Systems Engineering Division
CSEM
Jaquet-Droz 1 email: matomira AT acm DOT org
CH-2007 Neuchatel tel: +41 (32) 720-5157
Switzerland FAX: +41 (32) 720-5720
www.csem.ch www.vrai.com ligwww.epfl.ch/matomira.html
> Richard> In the context of lisp, what is the pronunciation of the #
> Richard> symbol? That is, what do you call it?
>
> OK, I think the only term not listed so far is 'pound sign', which
> apparently is/was also used. Pretty confusingly, I'd say. The only
> connection I can see is that shift-3 usually correponds to '#',
> whereas on British keyboards shift-3 is £ (i.e. the stylized L
> currency symbol) ... ah well,
I seem to recall it being called an `octothorp' the last time this
discussion went around (I don't think it was here).
Cheers,
M.
--
very few people approach me in real life and insist on proving they are
drooling idiots. -- Erik Naggum, comp.lang.lisp
I have always called it "pound sign" and I have seen # used as an abbreviation
for weight e.g. 5# bag of flour
> In the context of lisp, what is the pronunciation of the #
> symbol? That is, what do you call it?
Many have responded with several names, all of which I have
heard and recognize it by. My two favorites are "Sharpsign"
(because it is what Common Lisp calls it in the spec,
sec 2.4.8) and "Scratch" (because it is by far the easiest for
me to say).
--
Duane Rettig Franz Inc. http://www.franz.com/ (www)
1995 University Ave Suite 275 Berkeley, CA 94704
Phone: (510) 548-3600; FAX: (510) 548-8253 du...@Franz.COM (internet)
>
> I never called it!
I say things like "plus ignore", in the same manner I always liked
saying say "wuwuwu sgi com" (eventually, "worldwideweb")
["double u double u double u" ? "dot"? Pleazze! Even the "com" goes away
sometimes]
Please note that the OP said "in the context of lisp". We all know that
this symbol has many names, depending on the context. In Lisp it's
specifically used as the prefix of a bunch of reader macros, and that's the
sense he's asking about.
In my 20 years of using Lisp I've never heard it called anything but
"sharpsign", sometimes "sharp" for short when used in combination
(e.g. "#." would be pronounced "sharp-dot"). Zetalisp had a function
SETSYNTAX-SHARP-MACRO to assign them -- Common Lisp generalized this into
SET-DISPATCH-MACRO-CHARACTER.
CLTL seems to avoid referring to the character by any name -- it simply
uses the character itself throughout the text. The word "sharp" appears in
the index only as part of "sharp apostrophe", referring to a page where
closures are described and the #' abbreviation for FUNCTION is mentioned,
although the phrase itelf doesn't appear in the text on that page; it says
"# followed by an apostrophe" -- it's pretty interesting that it uses the
symbol "#" but the word "apostrophe". I suspect Guy was sensitive to the
fact that this symbol has many names and people may not recognize
"sharpsign" (this term comes from music notation, and it would hardly be
appropriate to assume the reader knows how to read music).
--
Barry Margolin, bar...@bbnplanet.com
GTE Internetworking, Powered by BBN, Burlington, MA
*** DON'T SEND TECHNICAL QUESTIONS DIRECTLY TO ME, post them to newsgroups.
Please DON'T copy followups to me -- I'll assume it wasn't posted to the group.
--
~jrm
Raute ! ;)
--
sincerely yours,
Jochen Schmidt
j...@dataheaven.de
> ...in the same manner I always like saying say "wuwuwu sgi com"
> (eventually, "worldwideweb")...
But does anybody know what you're talking about?
;) will
If it was just regarding Web sites.. ;)
> Marco Antoniotti wrote:
> >
> > Dr Nick Levine <nle...@beta.csd.anglia.ac.uk> writes:
> >
> > > Jochen Schmidt wrote:
> > > >
> > > > Richard James Panturis Giuly wrote:
> > > > >
> > > > > In the context of lisp, what is the pronunciation of the #
> > > > > symbol? That is, what do you call it?
> > > >
> > > > Sharp?
> > > >
> > >
> > > Hash
> >
> > Cancelletto? Diesis? :)
> >
>
> Raute ! ;)
Die`se! ;)
> Jochen Schmidt wrote:
>
> > Marco Antoniotti wrote:
> > >
> > > Dr Nick Levine <nle...@beta.csd.anglia.ac.uk> writes:
> > >
> > > > Jochen Schmidt wrote:
> > > > >
> > > > > Richard James Panturis Giuly wrote:
> > > > > >
> > > > > > In the context of lisp, what is the pronunciation of the #
> > > > > > symbol? That is, what do you call it?
> > > > >
> > > > > Sharp?
> > > > >
> > > >
> > > > Hash
> > >
> > > Cancelletto? Diesis? :)
> > >
> >
> > Raute ! ;)
>
> Die`se! ;)
Cardinal ;)
> Fernando D. Mato Mira wrote:
>
> > ...in the same manner I always like saying say "wuwuwu sgi com"
> > (eventually, "worldwideweb")...
>
> But does anybody know what you're talking about?
Moe or Larry cointanly would. Nyuk Nyuk Nyuk.
I always liked saying say "wuwuwu sgi com" (eventually, "worldwideweb")
["double u double u double u" ? "dot"? Pleazze!
Doonesbury's derisive nickname for the putative Republican presidential
nominee suggests another replacement for "double u double u double u,"
namely: "dubya-dubya-dubya," or even "dub-dub-dubya." The latter seemed to
be understood perfectly (and without conscious notice) by the last couple of
people I tried it on.
Larry
--
Lawrence Hunter, Ph.D. Chief, Molecular Statistics and Bioinformatics
National Cancer Institute email: lhu...@nih.gov
Federal Building, Room 318 phone: +1 (301) 402-0389
7550 Wisconsin Ave. fax: +1 (301) 480-0223
Bethesda, MD 20892 USA
Kreuz ;)
>
> --
> Fernando D. Mato Mira
> Real-Time SW Eng & Networking
> Advanced Systems Engineering Division
> CSEM
> Jaquet-Droz 1 email: matomira AT acm DOT org
> CH-2007 Neuchatel tel: +41 (32) 720-5157
> Switzerland FAX: +41 (32) 720-5720
>
> www.csem.ch www.vrai.com ligwww.epfl.ch/matomira.html
--
cya,
Jochen Schmidt
j...@dataheaven.de
http://www.dataheaven.de
> William Deakin <wi...@pindar.com> writes:
>
> > Fernando D. Mato Mira wrote:
> >
> > > ...in the same manner I always like saying say "wuwuwu sgi com"
> > > (eventually, "worldwideweb")...
> >
> > But does anybody know what you're talking about?
>
> Moe or Larry cointanly would. Nyuk Nyuk Nyuk.
~ : "wiggle", or even "go to wiki-wiki matomira" ;)
Ah, a wise guy, eh... *POINK*
Yo! Homie!
;) will
> namely: "dubya-dubya-dubya," or even "dub-dub-dubya." The latter seemed to
"yabadabadoo yahoo dot com" ?
"Scoobie Doo wanadoo ef er" ?
> Joe Marshall <jmar...@alum.mit.edu> wrote in message
> news:uem9aykx...@alum.mit.edu...
> > William Deakin <wi...@pindar.com> writes:
> >
> > > Fernando D. Mato Mira wrote:
> > >
> > > > ...in the same manner I always like saying say "wuwuwu sgi com"
> > > > (eventually, "worldwideweb")...
> > >
> > > But does anybody know what you're talking about?
> >
> > Moe or Larry cointanly would. Nyuk Nyuk Nyuk.
> >
>
> Ah, a wise guy, eh... *POINK*
OW!....
Oh no! I can't see! I can't see!
> Do you ever get that feeling that you really, really wished you hadn't
> asked?
What does "cd kwik kwik" mean? ;->
> What does "cd kwik kwik" mean? ;->
Under Solaris 2.6 it means: cd: too many arguments
;) will
> Frank A. Adrian wrote:
> >
> >Jochen Schmidt <kid_s...@gmx.de> wrote:
> >
> > > "Fernando D. Mato Mira" wrote:
> > > >
> > > > "Fernando D. Mato Mira" wrote:
> > > >
> > > > > Jochen Schmidt wrote:
> > > > >
> > > > > > Marco Antoniotti wrote:
> > > > > > >
> > > > > > > Dr Nick Levine <nle...@beta.csd.anglia.ac.uk> writes:
> > > > > > >
> > > > > > > > Jochen Schmidt wrote:
> > > > > > > > >
> > > > > > > > > Richard James Panturis Giuly wrote:
> > > > > > > > > >
> > > > > > > > > > In the context of lisp, what is the pronunciation of the #
> > > > > > > > > > symbol? That is, what do you call it?
> > > > > > > > >
> > > > > > > > > Sharp?
> > > > > > > >
> > > > > > > > Hash
> > > > > > >
> > > > > > > Cancelletto? Diesis? :)
> > > > > >
> > > > > > Raute ! ;)
> > > > >
> > > > > Die`se! ;)
> > > >
> > > > Cardinal ;)
> > >
> > > Kreuz ;)
> > >
> > Octothorpe.
> >
> Gitter !
Risuaita
Hässäkkä -- In my mother-in-law's Savolax dialect.
Gato :)
(in Chile, honest!)
Yes, and #!/bin/bash is thus pronounced "hash bang slash bin slash bash".
--
- Fredrik Sandstrom fre...@infa.abo.fi http://infa.abo.fi/~fredrik -
Computer Science at Abo Akademi University --
> Andrew Cooke <and...@andrewcooke.free-online.co.uk> writes:
>
> > In article <tz466ul...@sibelius.cs.colostate.edu>,
> > eric dahlman <dah...@cs.colostate.edu> wrote:
> > > rur...@x-ray.at (Reini Urban) writes:
> > >
> > > > Frank A. Adrian wrote:
> > > > >
> > > > >Jochen Schmidt <kid_s...@gmx.de> wrote:
> > > > >
> > > > > > "Fernando D. Mato Mira" wrote:
> > > > > > >
> > > > > > > "Fernando D. Mato Mira" wrote:
> > > > > > >
> > > > > > > > Jochen Schmidt wrote:
> > > > > > > >
> > > > > > > > > Marco Antoniotti wrote:
> > > > > > > > > >
> > > > > > > > > > Dr Nick Levine <nle...@beta.csd.anglia.ac.uk> writes:
> > > > > > > > > >
> > > > > > > > > > > Jochen Schmidt wrote:
> > > > > > > > > > > >
> > > > > > > > > > > > Richard James Panturis Giuly wrote:
> > > > > > > > > > > > >
> > > > > > > > > > > > > In the context of lisp, what is the pronunciation
> > of th=
> > > e #
> > > > > > > > > > > > > symbol? That is, what do you call it?
> > > > > > > > > > > >
> > > > > > > > > > > > Sharp?
> > > > > > > > > > >
> > > > > > > > > > > Hash
> > > > > > > > > >
> > > > > > > > > > Cancelletto? Diesis? :)
> > > > > > > > >
> > > > > > > > > Raute ! ;)
> > > > > > > >
> > > > > > > > Die`se! ;)
> > > > > > >
> > > > > > > Cardinal ;)
> > > > > >
> > > > > > Kreuz ;)
> > > > > >
> > > > > Octothorpe.
> > > > >
> > > > Gitter !
> > >
> > > Risuaita
> > >
> > > H=E4ss=E4kk=E4 -- In my mother-in-law's Savolax dialect.
> > >
> >
> > Gato :)
> >
> > (in Chile, honest!)
>
> Lattenzaun!
"kryss", or sometimes "skigard". HTH, HAND. ;)
--
Arvid
Here, kitty, kitty, kitty...
> Richard James Panturis Giuly wrote:
>
> > In the context of lisp, what is the pronunciation of the #
> > symbol? That is, what do you call it?
>
> I never called it!
You can't easily call it, either:
(funcall '# nil)
Error: Illegal sharp character #\space
[condition type: READER-ERROR]
(funcall # nil)
Error: Illegal sharp character #\space
[condition type: READER-ERROR]
Of course, if you use "|#|" or intern, you can call it:
(defun |#| () "" nil)
(funcall (intern "#"))
NIL
--
Arvid
in a silly mood today