Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss

Rotronic Humidity sensor

7 views
Skip to first unread message

peter tate

unread,
Feb 11, 2010, 9:48:32 AM2/11/10
to
Anybody here with some expierence connecting these sensors via USB to
labview?
Thanks for help
Peter Tate

An...@mous.com

unread,
Feb 14, 2010, 11:27:56 AM2/14/10
to
peter tate wrote:
> Anybody here with some expierence connecting these sensors via USB to
> labview? Thanks for help Peter Tate

See:
http://forums.ni.com/ni/board/message?board.id=170&message.id=409220&query.id=534131#M409220


Also:
1) Page 3 of the following implies that they've used the Rotronic with Labview. You might try to contact the authors.
http://www.atmos-meas-tech-discuss.net/2/1057/2009/amtd-2-1057-2009-print.pdf
http://www.atmos-chem-phys.net/9/2959/2009/acp-9-2959-2009.pdf

2) Rotronic is using the Microsoft .Net Framework 2.0 for its USB driver and from the driver available on their website, they appear to be using the FTDIchip.com IC and driver.

http://www.rotronic-humidity.com/content/humidity_feuchte/software_drivers_tools.php
http://www.rotronic-usa.com/man/logger/Com-LogNT.pdf

Thus it is likely that their device just looks like a virtual serial port. Once their USB driver is installed, you could use the following to build your own interface:

http://decibel.ni.com/content/docs/DOC-8092

0 new messages