Google Groups Home
Help | Sign in
Message from discussion ASA5510 with Cisco VPN client. No traffic over VPN tunnel
The group you are posting to is a Usenet group. Messages posted to this group will make your email address visible to anyone on the Internet.
Your reply message has not been sent.
Your post was successful
Locutus  
View profile
 More options May 18, 5:03 pm
Newsgroups: comp.dcom.sys.cisco
From: "Locutus" <locutus@no-spam-email>
Date: Sun, 18 May 2008 23:03:12 +0200
Local: Sun, May 18 2008 5:03 pm
Subject: Re: ASA5510 with Cisco VPN client. No traffic over VPN tunnel
Hi thanks for the quick answer ..
I tried those yesterday. Unfortunately  to effect.
It did however bring me to the solution.

There is a bug in the ASA "IOS" image i was using (i know it's not IOS but
don't know another name for it).
It caused the rules i added to the ACL to be entered but they where never
applied.
The issue is described in
http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?met....
I never thought about restarting the device and therefore never got the
rules applied to the Nonat acl0 interface.
I finally updated to an interim release of the asa firmware and this issue
seems to be resolved.

Locutus

"Newbie72" <sd...@hotmail.com> wrote in message

news:52120299-4497-4627-928f-25e4b362d9ad@56g2000hsm.googlegroups.com...
On May 15, 4:53 am, "Locutus" <locutus@no-spam-email> wrote:

> Hi all,

> In the hopes anyone sees my error in my config (I'm almost sure it's a
> config error on my part but i can't find it).
> I'm trying to get the Cisco VPN client to work with an ASA 5510. Tried the
> manual config way and the ASDM way through the wizard.

> The problem is not that i can't get any ipsec connection. That works. But
> when the VPN connection is established i can't get any trafic from my
> Client
> VPN IP segment (172.16.101.0/24 to the internal network (172.16.100.0/24).
> The logs in the ASDM keep giving me the same error (this is another error
> but the error for opening a RDP connection from src to dst is the same):

> 3|May 13 2008|21:09:41|305005|172.16.100.252|53|||No translation group
> found
> for udp src outside:172.16.101.100/49959 dst Company-lan:172.16.100.252/53
> 3|May 13 2008|21:09:41|305005|172.16.100.252|53|||No translation group
> found
> for udp src outside:172.16.101.100/61829 dst Company-lan:172.16.100.252/53
> 3|May 13 2008|21:09:41|305005|172.16.100.252|53|||No translation group
> found
> for udp src outside:172.16.101.100/61829 dst Company-lan:172.16.100.252/53
> 3|May 13 2008|21:09:40|305005|172.16.100.252|53|||No translation group
> found
> for udp src outside:172.16.101.100/64955 dst Company-lan:172.16.100.252/53
> 3|May 13 2008|21:09:40|305005|172.16.100.252|53|||No translation group
> found
> for udp src outside:172.16.101.100/64955 dst Company-lan:172.16.100.252/53
> 3|May 13 2008|21:09:39|305005|172.16.100.252|53|||No translation group
> found
> for udp src outside:172.16.101.100/61676 dst Company-lan:172.16.100.252/53
> 3|May 13 2008|21:09:39|305005|172.16.100.252|53|||No translation group
> found
> for udp src outside:172.16.101.100/61676 dst Company-lan:172.16.100.252/53

> This is the current config file i'm using (anonymised offcourse):

> : Saved
> :
> ASA Version 8.0(3)
> !
> hostname asa5510
> enable password 1mujhtmA4fcM3pOA encrypted
> !
> interface Ethernet0/0
> description Interface connected to Internet
> nameif outside
> security-level 0
> ip address x.x.x.x 255.255.255.248
> !
> interface Ethernet0/1
> description Interface connected to the Company-Holding LAN
> speed 1000
> duplex full
> nameif Company-lan
> security-level 100
> ip address 172.16.100.1 255.255.255.0
> !
> interface Ethernet0/2
> description Interface connected to the old OLDLAN-Lan
> nameif OLDLAN-lan
> security-level 100
> ip address 192.168.1.1 255.255.255.0
> !
> interface Ethernet0/3
> description Interface for DMZ purposes
> nameif DMZ
> security-level 50
> ip address 10.172.100.1 255.255.255.0
> !
> interface Management0/0
> nameif management
> security-level 100
> ip address 10.10.10.1 255.255.255.0
> management-only
> !
> passwd 2KFQnbNIdI.2KYOU encrypted
> boot system disk0:/asa803-k8.bin
> ftp mode passive
> dns server-group CompanyDNS
> name-server 172.16.100.252
> name-server 192.168.1.100
> name-server 194.151.228.18
> name-server 194.151.228.34
> domain-name Company-holding.local
> dns-group CompanyDNS
> same-security-traffic permit inter-interface
> access-list Company-lan_nat0_outbound extended permit ip 172.16.100.0
> 255.255.255.0 192.168.1.0 255.255.255.0
> access-list Company-lan_nat0_outbound extended permit ip 172.16.100.0
> 255.255.255.0 172.16.101.0 255.255.255.0
> access-list OLDLAN-lan_nat0_outbound extended permit ip 192.168.1.0
> 255.255.255.0 172.16.100.0 255.255.255.0
> access-list outside-entry extended permit tcp any host x.x.x.x eq smtp
> access-list outside_access_in remark SMTP permit line to the Exchange
> Server
> access-list outside_access_in extended permit tcp any host x.x.x.x eq smtp
> access-list outside_access_in extended permit tcp any host x.x.x.x eq ssh
> inactive
> access-list outside_access_in extended permit ip 172.16.101.0
> 255.255.255.0
> 172.16.100.0 255.255.255.0
> pager lines 24
> logging enable
> logging asdm informational
> mtu outside 1500
> mtu Company-lan 1500
> mtu OLDLAN-lan 1500
> mtu DMZ 1500
> mtu management 1500
> ip local pool CompanySecure 172.16.101.100-172.16.101.252 mask
> 255.255.255.0
> ip verify reverse-path interface outside
> no failover
> icmp unreachable rate-limit 1 burst-size 1
> asdm image disk0:/asdn-611.bin
> no asdm history enable
> arp timeout 14400
> global (outside) 1 interface
> nat (Company-lan) 0 access-list Company-lan_nat0_outbound
> nat (Company-lan) 1 0.0.0.0 0.0.0.0
> nat (OLDLAN-lan) 0 access-list OLDLAN-lan_nat0_outbound
> nat (OLDLAN-lan) 1 0.0.0.0 0.0.0.0
> static (Company-lan,outside) tcp interface smtp 172.16.100.251 smtp
> netmask
> 255.255.255.255
> access-group outside_access_in in interface outside
> route outside 0.0.0.0 0.0.0.0 77.61.155.73 1
> timeout xlate 3:00:00
> timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
> timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat
> 0:05:00
> timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect
> 0:02:00
> timeout uauth 0:05:00 absolute
> dynamic-access-policy-record DfltAccessPolicy
> aaa-server IASadCompany protocol radius
> aaa-server IASadCompany (Company-lan) host <host>
> key <omitted>
> aaa authentication http console IASadCompany LOCAL
> aaa authentication ssh console LOCAL
> http server enable 20443
> http 172.16.100.0 255.255.255.0 Company-lan
> http 10.10.10.0 255.255.255.0 management
> no snmp-server location
> no snmp-server contact
> snmp-server enable traps snmp authentication linkup linkdown coldstart
> crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
> crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac
> crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac
> crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
> crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
> crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
> crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
> crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
> crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
> crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
> crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs
> crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set transform-set
> ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5
> ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA
> ESP-DES-MD5
> crypto map outside_map 65535 ipsec-isakmp dynamic
> SYSTEM_DEFAULT_CRYPTO_MAP
> crypto map outside_map interface outside
> crypto isakmp enable outside
> crypto isakmp policy 10
> authentication pre-share
> encryption 3des
> hash sha
> group 2
> lifetime 86400
> crypto isakmp ipsec-over-tcp port 10000
> telnet timeout 5
> ssh 172.16.100.0 255.255.255.0 Company-lan
> ssh 10.10.10.0 255.255.255.0 management
> ssh timeout 5
> ssh version 2
> console timeout 0
> dhcpd address 10.10.10.100-10.10.10.200 management
> dhcpd dns 194.151.228.18 194.151.228.34 interface management
> dhcpd domain itmanagement.Company-holding.local interface management
> dhcpd enable management
> !
> vpn load-balancing
> interface lbprivate DMZ
> threat-detection basic-threat
> threat-detection statistics port
> threat-detection statistics protocol
> threat-detection statistics access-list
> webvpn
> csd image disk0:/securedesktop_asa-3.3.0.118-k9.pkg
> csd enable
> group-policy DfltGrpPolicy attributes
> vpn-tunnel-protocol l2tp-ipsec webvpn
> group-policy ClientVPN internal
> group-policy ClientVPN attributes
> dns-server value 172.16.100.252
> vpn-tunnel-protocol IPSec
> password-storage disable
> default-domain value secure.Company-holding.local
> secure-unit-authentication enable
> user-authentication enable
> msie-proxy server value 172.16.100.250:8080
> msie-proxy method use-server
> msie-proxy local-bypass enable
> username admin password <omitted> privilege 15
> tunnel-group ClientVPN type remote-access
> tunnel-group ClientVPN general-attributes
> address-pool CompanySecure
> default-group-policy ClientVPN
> tunnel-group ClientVPN ipsec-attributes
> pre-shared-key *
> !
> class-map inspection_default
> match default-inspection-traffic
> !
> !
> policy-map type inspect dns preset_dns_map
> parameters
> message-length maximum 512
> policy-map global_policy
> class inspection_default
> inspect dns preset_dns_map
> inspect ftp
> inspect h323 h225
> inspect h323 ras
> inspect rsh
> inspect rtsp
> inspect sqlnet
> inspect skinny
> inspect sunrpc
> inspect xdmcp
> inspect sip
> inspect netbios
> inspect tftp
> !
> service-policy global_policy global
> prompt hostname domain context
> Cryptochecksum:25bc95a8279f59219e3d64b5129271c8
> : end

> Hope anyone can help....

or in your case just add the address to this access list nat (Company-
lan) 0 access-list Company-lan_nat0_outbound

    Reply to author    Forward  
You must Sign in before you can post messages.
To post a message you must first join this group.
Please update your nickname on the subscription settings page before posting.
You do not have the permission required to post.

Create a group - Google Groups - Google Home - Terms of Service - Privacy Policy
©2008 Google