http://groups.google.com/group/comp.dcom.sys.ciscocomp.dcom.sys.cisco Google Group
Info on Cisco routers and bridges.
2010-01-07T20:32:35ZGoogle Groupsbod43bo...@hotmail.co.uk2010-01-07T20:32:35Zhttp://groups.google.com/group/comp.dcom.sys.cisco/browse_thread/thread/f4557cc691432e2a/886a1276d683a040?show_docid=886a1276d683a040Re: IRB and channel groups help needed
I would have thought that you configured the sub-interfaces on the <br> port channel only. Not the physical interfaces. <br> By the way as I am sure you <br> know there are two very distinct 8500 models, one <br> very ATM-y and one Ethernet-y and you need to be <br> careful which documentation you look at. CSR? Was <br> decades ago:)
pfisterfarmpfisterf...@gmail.com2010-01-07T17:13:41Zhttp://groups.google.com/group/comp.dcom.sys.cisco/browse_thread/thread/f4557cc691432e2a/4c9e9ec9a31a96a1?show_docid=4c9e9ec9a31a96a1IRB and channel groups help needed
I've got a 8540 switch running 12.1(20)E set up with IRB and I've got <br> two interfaces I'm looking at: <br> interface GigabitEthernet0/0/3 <br> no ip address <br> no ip redirects <br> ! <br> interface GigabitEthernet0/0/3.1 <br> description Native VLAN <br> encapsulation dot1Q 1 native <br> no ip redirects <br> ! <br> interface GigabitEthernet0/0/3.99
Aaron Leonardaa...@cisco.com2010-01-06T21:46:28Zhttp://groups.google.com/group/comp.dcom.sys.cisco/browse_thread/thread/b6303eaf724bd1dc/772535e9c13483e9?show_docid=772535e9c13483e9Re: ntp won't lock
~ > ~ > Due to a recent hardware revision in the 85x/87x routers, you'll <br> ~ > ~ > need to upgrade IOS to get [S]NTP to work right. <br> ~ > ~ <br> ~ > ~ I have upgraded the IOS and the issue is indeed resolved. �Thanks again. <br> ~ > <br> ~ > Great, thanks for the confirmation. <br> ~ > <br> ~ > Aaron <br> ~ <br> ~ Rob, what version of IOS did you move to? I upgraded my 871W to 12.4.
alagmyenglishtranslator2...@yahoo.com2010-01-06T19:51:21Zhttp://groups.google.com/group/comp.dcom.sys.cisco/browse_thread/thread/727aa9b7cbb59003/2bf4c31149afbcf4?show_docid=2bf4c31149afbcf4open all blocked sites in your country now
open all blocked sites in your country now <br> Browse the internet securely using Your Proxy <br> You can unblock popular social networking sites such as myspace, <br> bebo, facebook and many other sites. <br> <a target="_blank" rel=nofollow href="http://alagmyproxy.zxq.net/proxy/index.php">[link]</a>
Igor Mamuziæ aka Psetoigor.mamuzicmakni_...@zg.t-com.hr2010-01-06T17:58:45Zhttp://groups.google.com/group/comp.dcom.sys.cisco/browse_thread/thread/b07c0ead91bab578/5f998c843666a9bb?show_docid=5f998c843666a9bbRe: Looking for a solution where VPN Client access can use site to site VPN (can the ASA 5510 help?)
It's possible with Cisco ASA/PIX on your "location A" ...I've implemented it <br> in a lot of places btw. It's realtivle simple design: create site-2-site <br> between locations "A" and "B". Then on site "A" ASA configure remote access <br> vpn and use "same-security-traffic permit intra-interface" global config <br> command to let traffic that enters one interface to exit again trough that
Igor Mamuziæ aka Psetoigor.mamuzicmakni_...@zg.t-com.hr2010-01-06T17:58:03Zhttp://groups.google.com/group/comp.dcom.sys.cisco/browse_thread/thread/b07c0ead91bab578/9fefccbc84c6b2da?show_docid=9fefccbc84c6b2daRe: Looking for a solution where VPN Client access can use site to site VPN (can the ASA 5510 help?)
It's possible with Cisco ASA/PIX on your "location A" ...I've implemented it <br> in a lot of places btw. It's realtivle simple design: create site-2-site <br> between locations "A" and "B". Then on site "A" ASA configure remote access <br> vpn and use "same-security-traffic permit intra-interface" global config <br> command to let traffic that enters one interface to exit again trough that
Keerthimadhri...@gmail.com2010-01-06T13:17:35Zhttp://groups.google.com/group/comp.dcom.sys.cisco/browse_thread/thread/0e9967d01c52be00/9ff18ec38885bc2f?show_docid=9ff18ec38885bc2fCISCO Devices as PPTP Client
Hi <br> I am trying to understand if Cisco Devices can act as PPTP clients? I <br> see only server side configurations [Accept-Dialin] in whole of <br> cisco's site. Can i conclude that cisco switch/routers cannot act as <br> PPTP Client? <br> If its possible, please point to configuration steps involved. <br> Thank You.
makem...@nomake.com2010-01-06T12:07:14Zhttp://groups.google.com/group/comp.dcom.sys.cisco/browse_thread/thread/d445b52182cae3c0/23f030719dbdb650?show_docid=23f030719dbdb650Re: 3750 stack members
Use show switch, this tells that this switch is number 3. Try, command: <br> switch 3 renumber 1, wr mem and reload.
urvashi Beniwalurvashi.iy...@gmail.com2010-01-06T10:42:53Zhttp://groups.google.com/group/comp.dcom.sys.cisco/browse_thread/thread/8e93cb16d54dcca4/5acad4ed3280da81?show_docid=5acad4ed3280da81Re: Aero Glass Effect
Hi David Kerber <br> Thanks a lot
urvashi Beniwalurvashi.iy...@gmail.com2010-01-06T10:42:28Zhttp://groups.google.com/group/comp.dcom.sys.cisco/browse_thread/thread/8e93cb16d54dcca4/c5b8b5a0714cd374?show_docid=c5b8b5a0714cd374Re: Aero Glass Effect
Thanks you Rob
urvashi Beniwalurvashi.iy...@gmail.com2010-01-06T10:42:14Zhttp://groups.google.com/group/comp.dcom.sys.cisco/browse_thread/thread/8e93cb16d54dcca4/784f0d9d6b4ecda5?show_docid=784f0d9d6b4ecda5Re: Aero Glass Effect
On Jan 4, 7:34 pm, Bob Goddard <num...@1.individual.mailtrap. org.uk> <br> wrote: <br> Thank You Bob
Robnom...@example.com2010-01-06T08:42:15Zhttp://groups.google.com/group/comp.dcom.sys.cisco/browse_thread/thread/b6303eaf724bd1dc/ea830443846fdc02?show_docid=ea830443846fdc02Re: ntp won't lock
12.4(15)T11 <br> This is a version in the same train that came with the router originally. <br> Unfortunately it does not contain recent ADSL firmware so I separately <br> downloaded and installed that (adsl_alc_20190_4.0.018.bin). This fixes <br> problems I had with the ADSL line.
Darren Mouldingfat...@cysco.clara.co.uk2010-01-06T05:52:01Zhttp://groups.google.com/group/comp.dcom.sys.cisco/browse_thread/thread/d445b52182cae3c0/1f6b34c0b86033fe?show_docid=1f6b34c0b86033feRe: 3750 stack members
I have a problem with a Cisco stack with 3 members. <br> All 3 memebers are catalyst 3750. <br> Because these stack is currently not in use i will use all of them as <br> spare in case of one of the other switches of infrastructure will <br> fail. <br> I removed a memeber from this stack - as explained at cisco website: <br> powerde down the member to remove and at master - no switch 3
John Smythnewsgr...@nospam-me.arpadeck.com2010-01-06T04:19:47Zhttp://groups.google.com/group/comp.dcom.sys.cisco/browse_thread/thread/b07c0ead91bab578/cd1610ad740fdf48?show_docid=cd1610ad740fdf48Looking for a solution where VPN Client access can use site to site VPN (can the ASA 5510 help?)
I'm starting to work on getting new Location to add to my network. <br> As it is this new location (location A) has redundant power so we will be <br> moving most of our servers to this location unfortunately not all servers <br> get to move. <br> So what I am looking for is a Solution where people can VPN into <br> "Location A" via the Cisco Anyconnect client (needed for the increasing
Stevest...@heyvan.com2010-01-06T04:13:55Zhttp://groups.google.com/group/comp.dcom.sys.cisco/browse_thread/thread/b6303eaf724bd1dc/5e6e8ce3cefb18e5?show_docid=5e6e8ce3cefb18e5Re: ntp won't lock
Rob, what version of IOS did you move to? I upgraded my 871W to 12.4. <br> (24)T2 and I still have the NTP problem on this router.