Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss
c1811 interface aliasing
1 view
Skip to first unread message
mmark751969
Jan 3, 2010, 6:39:24 PM1/3/10
to
I have a situation where i am installing a wan aggregator(barracuda).
I need to install the aggregator in front of the firewall, which is a
c1811 router/firewall. The router/firewall will need to service two
wan ip adresses from each isp because there is a seperate router
terminating each isp. It looks like the only way i'm going to be able
to do this is to define two ip addresses on the c1811 or ailiasing the
external interface on the c1811. Is the c1811 capable of this? if
so, what is the accepted method of doing this. Thanks
I need to install the aggregator in front of the firewall, which is a
c1811 router/firewall. The router/firewall will need to service two
wan ip adresses from each isp because there is a seperate router
terminating each isp. It looks like the only way i'm going to be able
to do this is to define two ip addresses on the c1811 or ailiasing the
external interface on the c1811. Is the c1811 capable of this? if
so, what is the accepted method of doing this. Thanks
Igor Mamuzić aka Pseto
Jan 16, 2010, 2:55:35 PM1/16/10
to
address secondary.
0 new messages