Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss

card type command issue

36 views
Skip to first unread message

fellugh

unread,
Nov 23, 2009, 9:08:45 AM11/23/09
to
Hi all,

I am running a 2811, I have just installed a new HWIC but it is not to
be 'detected'.
I have tried to run the 'card type' but the command is not recognize.

The IOS version I am running is 12.4(15)T7.

Any one can help.

Thanks.
Fell.

Doug McIntyre

unread,
Nov 23, 2009, 10:38:36 AM11/23/09
to
fellugh <fel...@RemoveThis.gmail.com> writes:
>I am running a 2811, I have just installed a new HWIC but it is not to
>be 'detected'.
>I have tried to run the 'card type' but the command is not recognize.

>The IOS version I am running is 12.4(15)T7.

Almost always the new HWIC needs newer version of IOS.

What does a 'show diag' give you about that slot you put it in?


fellugh

unread,
Nov 23, 2009, 11:44:20 AM11/23/09
to
Doug McIntyre a �crit :

Hi Doug,

You are right. The IOS version I am running is a bit old.
I have to update it to the 12.4-20 at least.
Versions above don't suppose this command.

Thanks for your answer.

Reg.
Fell

fellugh

unread,
Nov 24, 2009, 12:07:25 PM11/24/09
to
fellugh a �crit :

Hi there,

I have just install the new IOS version : 12.4-20T
The card command is 'here' but returns me :
------
r006748(config)#card type e1 1
Card in slot 1 was removed or does not support command.
r006748(config)#
------

sh diag :
WIC Slot 1:
1 port channelized and PRI T1/E1 HWIC

Do you have any idea ?

Fel.

Doug McIntyre

unread,
Nov 24, 2009, 3:43:42 PM11/24/09
to
fellugh <fel...@RemoveThis.gmail.com> writes:
>I have just install the new IOS version : 12.4-20T
>The card command is 'here' but returns me :
>------
>r006748(config)#card type e1 1
>Card in slot 1 was removed or does not support command.
>r006748(config)#
>------

>sh diag :
> WIC Slot 1:
> 1 port channelized and PRI T1/E1 HWIC

>Do you have any idea ?

I assume you have the HWIC-1CE1T1-PRI interface card.

The docs say you need to specify two numbers after the line type..

http://www.cisco.com/en/US/docs/ios/12_4/12_4x/12_4_11xw/fmt1e1ic.html

card type e1 1 1

?

Otherwise, since 12.4(20T) is the very first version with support for
HWIC-1CE1T1-PRI, maybe they messed up something, try something slightly newer?


fellugh

unread,
Nov 25, 2009, 3:08:30 AM11/25/09
to
Doug McIntyre a �crit :
Hi Doug,

Thanks for the link ...
Yesterday, after the new IOS installed, I was a bit disappointed as I
got an other error ... I posted my question to quickly because I found
the solution by my own :

r006748#card type e1 0 1

But the link is really interesting.

Thanks anyway for your reply.
Fell.

0 new messages