Description:
Info on Cisco routers and bridges.
|
|
|
AIR-AP120B-A-K9
|
| |
Guys n gal's how do I get a show version out of this unit...it does not let me do one...do I have to hold the mode buton or something? Thanks
|
|
|
Cisco Network Assistant and 2924
|
| |
Hello. I have problem with CNA. It dont want to talk with C2900XL-H-M 4mb ram and c2900XL-hs-mz-112.8.10-SA6.bin software on board. When I make a connection CNA tels "Device nos supported". I was trying v3, v4, v5.2 of CNA without any result. Is is any solutnion to make useful CNA with 2924 and 4mb ram?... more »
|
|
|
IOS downloads
|
| |
Hi all, what do i have to do to gain access to Cisco's IOS download page? Regards, Andre
|
|
|
Cisco WLAN Controller project
|
| |
Hello, I've been asked to look at a WLAN Controller project. Initially, this will be for our internal use, then eventually offering some sort of multi-tenancy share for our customers. Anyone have any experience in the latter? I guess we'd need a WCS, in order to give customers access to see their own devices/reports etc. If that's possible.... more »
|
|
|
Hulc LED Process stressing my 2960 cisco switch
|
| |
Hi all, I have four 2960 switches that have the same "problem" that is : their CPU couter is always at 20%. Result of a "sh proc cpu | excl 0.00% 0.00% 0.00%" : ------------------------------ - CPU utilization for five seconds: 20%/1%; one minute: 18%; five minutes: 18% PID Runtime(ms) Invoked uSecs 5Sec 1Min 5Min TTY Process... more »
|
|
|
ASA5505 to cascade two switches.
|
| |
Hello... I have lab with ASA 5505 as a router, port 4 and port 6 are configure at the same internal VLAN subnet, port 6 connect to Switch1 (2960), port 4 connects to Switch2 (3960), any hosts connects to Switch1 and Switch2 can connect to each other and to the internet without problem. Now, when I reconnect Switch2 to port 23 of Switch1, hosts in Switch2... more »
|
|
|
bandwidth and clock rate??
|
| |
Hi everyone, in routers when I configure a serial interface what is the difference between bandwidth and clock rate and when we configure them also, I want to ask about the exact mean of bandwidth.
|
|
|
repeater setup problem cisco 340 AP
|
| |
trying to configure a Cisco 340 access point as a repeater, I've been going through the instructions here: [link] everything seems to go okay until I get to step 19 where it says: 'Step 19 On the Express Setup page, select Repeater Access Point as... more »
|
|
|
ASA5510 with Cisco VPN client. No traffic over VPN tunnel
|
| |
Hi all, In the hopes anyone sees my error in my config (I'm almost sure it's a config error on my part but i can't find it). I'm trying to get the Cisco VPN client to work with an ASA 5510. Tried the manual config way and the ASDM way through the wizard. The problem is not that i can't get any ipsec connection. That works. But... more »
|
|
|
