Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss
New routers will not configure...
3 views
Skip to first unread message
David W. Mitchell
Jun 4, 2008, 12:47:08 PM6/4/08
to
We switched over to new T-1's and MRTG 2.12.2 will not configure with the
Cisco 1840 routers. The provider states they set the SNMP RO string
properly. Here is the error I am getting:
Cisco 1840 routers. The provider states they set the SNMP RO string
properly. Here is the error I am getting:
SNMPWALK problem for 1.3.6.2.1.1 on <string>@<ip address> :::::v4only at
cfgmkr line 858
WARNING: Skipping <string>@<ip address> as no info couild be retrieved.
Here is the content of line 858 in cfgmkr:
my @variables = snmpwalk(v4onlyifnecessary($router, $ipv4only),
'1.3.6.1.2.1.1'); # walk system
Please interpret, I have no idea what this is indicating other than a
communication problem.
David Mitchell
dav...@pace.paceint.com <remove the first pace for paceint.com to email me>
0 new messages