Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss
WF4 - CMM - DMIS version - SCANNING
0 views
Skip to first unread message
Pier Dil
Jul 5, 2008, 6:07:39 AM7/5/08
to
Hi people,
I'd like to know which version of DMIS Standard is now supported in WF4
CMM application
In WF3 DMIS 3.0 was supported.
Today DMIS reached the 5.1 version.
I'd like to know which version of DMIS Standard is now supported in WF4
CMM application
In WF3 DMIS 3.0 was supported.
Today DMIS reached the 5.1 version.
IN WF4 it's possible to drive a scanning movements. Anybody has
experience with Zeiss Machines?
THANKS A LOT
Bye
Pier
Janes
Jul 5, 2008, 10:16:15 AM7/5/08
to
"Pier Dil" <pdil...@tiscali.it> wrote in message news:NJHbk.11010$f86....@tornado.fastwebnet.it...
> Hi people,
> I'd like to know which version of DMIS Standard is now supported in WF4
> CMM application
> In WF3 DMIS 3.0 was supported.
> Today DMIS reached the 5.1 version.
>
> Hi people,
> I'd like to know which version of DMIS Standard is now supported in WF4
> CMM application
> In WF3 DMIS 3.0 was supported.
> Today DMIS reached the 5.1 version.
>
Don't know anything technical on this subject so I checked the Pro/e KB. The last reference they have to any version was 3.0 in TPI 123099. What it said there was meant to quash rumors that they'd extensively support DMIS commands. Not very hopeful with respect to supporting MORE capable DMIS standards. PTC also has a negative incentive in the extra support commitment they incur if they support a later rev.
For more general questions, I'd try these guys, seems like a lively bunch:
http://www.pcdmisforum.com/
David Janes
Pier Dil
Jul 6, 2008, 3:01:42 AM7/6/08
to
Janes ha scritto:
Thank you so much anyway !
Bye
0 new messages