Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss
How do I prevent parts passing through one another? Assembly
2 views
Skip to first unread message
niki
Dec 17, 2009, 1:56:36 PM12/17/09
to
How do I prevent parts passing through one another? Assembly
I have created a damper, the constraints that I have used are pin for
the axis of the piston with the centre of the top part of the damper,
allowing me to slide the damper back and forth, but the problem that I
have is that the piston can still pass through the top part of the
damper when I move it.
I have created a damper, the constraints that I have used are pin for
the axis of the piston with the centre of the top part of the damper,
allowing me to slide the damper back and forth, but the problem that I
have is that the piston can still pass through the top part of the
damper when I move it.
Janes
Dec 19, 2009, 10:08:33 PM12/19/09
to
"niki" <nikifie...@hotmail.com> wrote in message news:a2bac545-2c0a-4610...@s20g2000yqd.googlegroups.com...
You can limit motion in a number of ways, depending on constraints, such as
distance or angle. But in some later versions of Pro/e with Mechanism Design,
isn't there something like the SolidWorks collision detection which will simply
stop the part? I don't know if it's a default or maybe it has to be "turned on"
with an option in 'Tools>Options'? Not an answer but possibly a
direction.
David Janes
0 new messages