Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss
getting samples from an RF board onto the system
0 views
Skip to first unread message
vits
May 10, 2008, 7:10:16 AM5/10/08
to
hi,
I have got an RF board (antenna+ADC+Some signal processing boxes on a
board). The output is a 2bit data and a clock (16MHz). I need to store
this 2 bit data for 1 second onto my system in some text or binary
format for using it in my simulations.
What is the best (in very less time) method to do this?
Any ideas
Thanks,
Vittal
I have got an RF board (antenna+ADC+Some signal processing boxes on a
board). The output is a 2bit data and a clock (16MHz). I need to store
this 2 bit data for 1 second onto my system in some text or binary
format for using it in my simulations.
What is the best (in very less time) method to do this?
Any ideas
Thanks,
Vittal
Arlet Ottens
May 10, 2008, 11:18:44 AM5/10/08
to
vits wrote:
The quickest method is to get a PC based logic analyzer. Make sure you
get one with a capture buffer that's deep enough, and has some means to
export the data.
0 new messages