Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss
Xilinx SDK 14.5 debug
32 views
Skip to first unread message
maxascent
May 11, 2013, 3:59:32 PM5/11/13
to
I have a Microblaze design in SDK that I am trying to debug. I have an IP
block with some registers that I can read and write. I have opened a new
memory monitor window so I can see the registers updating. The trouble is
that if I do a write to a register then the monitor does not update. I have
to open another monitor to a new address range, then go back to the
original monitor, then the register will show its new value. It as if the
monitor is not being refreshed. Has anybody seen this?
Thanks
Jon
---------------------------------------
Posted through http://www.FPGARelated.com
block with some registers that I can read and write. I have opened a new
memory monitor window so I can see the registers updating. The trouble is
that if I do a write to a register then the monitor does not update. I have
to open another monitor to a new address range, then go back to the
original monitor, then the register will show its new value. It as if the
monitor is not being refreshed. Has anybody seen this?
Thanks
Jon
---------------------------------------
Posted through http://www.FPGARelated.com
0 new messages