What is the function of Loader in Build process(tool chain)?
hsk2kor
I want to know the functionality of Loader ?
Regards
Hsk2kor
Peter
"hsk2kor" <harsha...@in.bosch.com> wrote in message
news:e3cnsr$3vm$1...@ns2.fe.internet.bosch.com...
decompresses it and then jumps to the start point, or it could be a machine
used by loggers to load cut timber onto log trucks for transport to their
next destination. Your tutor should be able to help with this.
Peter
Chris Hills
<harsha...@in.bosch.com> writes
>Hello ,
> I want to know the functionality of Loader ?
It load things.
I had a loader some years ago whose sole purpose was to take the clip of
3mm cannon shells and fit them to the RADEN cannon whilst I fired it.
My courier has a loader at the depot. He loads the van for him.
Then there are link-loaders.... Though these are called linkers these
days.
Also boot loaders which are quite common in shoe factories
It's been a long week :-)
--
\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\
\/\/\/\/\ Chris Hills Staffs England /\/\/\/\/
/\/\/ ch...@phaedsys.org www.phaedsys.org \/\/\
\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/
Bodo Rzany
> In article <e3cnsr$3vm$1...@ns2.fe.internet.bosch.com>, hsk2kor
> <harsha...@in.bosch.com> writes
>
>>Hello ,
>> I want to know the functionality of Loader ?
[snipped part]
> Also boot loaders which are quite common in shoe factories
>
> It's been a long week :-)
You should not forget to sell your Bosch stocks before this
week ends... ;-(
Bodo Rzany
Chris Hills
Yes, I had noticed the address..... He probably won't have it for long.
Tom Lucas
"Chris Hills" <ch...@phaedsys.org> wrote in message
news:frsF51Aq...@phaedsys.demon.co.uk...
> In article <e3cnsr$3vm$1...@ns2.fe.internet.bosch.com>, hsk2kor
> <harsha...@in.bosch.com> writes
>>Hello ,
>> I want to know the functionality of Loader ?
>
> It load things.
>
> I had a loader some years ago whose sole purpose was to take the clip of
> 3mm cannon shells and fit them to the RADEN cannon whilst I fired it.
Ah the old 3mm cannon, pivitol in the liberation of Barbie's Dream House ;-)
Chris Hills
VEautoTOflameREPLY.clara.co.uk> writes
OK ok already..... 30mm Or about an inch and a bit.
CBFalconer
> <harsha...@in.bosch.com> writes
>
>> I want to know the functionality of Loader ?
>
> It load things.
>
> I had a loader some years ago whose sole purpose was to take the
> clip of 3mm cannon shells and fit them to the RADEN cannon whilst
> I fired it.
>
> My courier has a loader at the depot. He loads the van for him.
>
> Then there are link-loaders.... Though these are called linkers
> these days.
>
> Also boot loaders which are quite common in shoe factories
>
> It's been a long week :-)
Don't forget freeloaders :-) Very common beasts. On Bastille Day
go to your French Consulate and listen attentively while swilling
Veuve Cliquot.
--
"If you want to post a followup via groups.google.com, don't use
the broken "Reply" link at the bottom of the article. Click on
"show options" at the top of the article, then click on the
"Reply" at the bottom of the article headers." - Keith Thompson
More details at: <http://cfaj.freeshell.org/google/>
Also see <http://www.safalra.com/special/googlegroupsreply/>
Richard
> Regards
> Hsk2kor
>
+What is a loader?
+How do I use a cache?
+I'm a senior embedded engineer, can somebody please explain the difference
between ROM and RAM to me?
+How do I connect to an external bus?
What is going on in the world? Does nobody read any more? "In my day" I
had to buy books and study, "kids theses days" have the internet at their
finger tips but are still too lazy to read.
Here are some hints -
1) Open google and type define:"boot loader" in as the search.
2) Go to Wikipedia.org and type in "boot loader" as the search.
I have not tried either of these by I bet a penny you will find what you are
looking for.
Regards,
Richard.
http://www.FreeRTOS.org
*Now for ARM CORTEX M3!*
Chris Hills
<nos...@thanks.com> writes
>> I want to know the functionality of Loader ?
>> Regards
>> Hsk2kor
>>
>
>+What is a loader?
some one who put s your shopping in the bag
>+How do I use a cache?
Cache is similar to a kredit kard
>+I'm a senior embedded engineer, can somebody please explain the difference
>between ROM and RAM to me?
A? O I C
>+How do I connect to an external bus?
wait at a bus stop.
>What is going on in the world?
everything
> Does nobody read any more?
Yes Nobody reads OK. After he got away from the cyclops.
> "In my day" I
>had to buy books and study, "kids theses days" have the internet at their
>finger tips but are still too lazy to read.
How did you study in your day?
>Here are some hints -
>1) Open google and type define:"boot loader" in as the search.
>2) Go to Wikipedia.org and type in "boot loader" as the search.
>
>I have not tried either of these by I bet a penny you will find what you are
>looking for.
what's google please tell me as I have to get this nuclear control
system working by monday
OK so I have been out for the evening and had a couple of glasses of red
:-)
Tom Lucas
news:e3cnsr$3vm$1...@ns2.fe.internet.bosch.com...
From the tone of this and your other posts I wonder if you might be jumping
in at the deep end a little bit. This question sounded like the sort of
thing one might ask if you came from a PC application background but your
array and pointer question suggests that is not so.
I'm still quite new to embedded systems but I've found that experimenting
with development kits and using the internet to see what other people have
done is very useful. Also for general information I find google gives the
fastest answer. This group is very useful for specific problems, opinions or
advice but, by definition, the people posting here are busy and only have
time to respond to posts that can't be solved through google (or are more
interesting than their current project!)
Bosch are a big company and may well get you on a training course to give
you a good grounding in what you need to know. I'm also sure that there are
enough skilled people in the company that you can talk to them and they will
be happy to help - plus they can physically demonstrate a loader in action
to you, which is something this group cannot do.
David R Brooks
> In article <Fyo6g.64089$wl.2...@text.news.blueyonder.co.uk>, Richard
> <nos...@thanks.com> writes
>
>> Does nobody read any more?
> Yes Nobody reads OK. After he got away from the cyclops.
>
>> "In my day" I
>> had to buy books and study, "kids theses days" have the internet at their
>> finger tips but are still too lazy to read.
>
> How did you study in your day?
>
sleet, no shoes, to the public library (which never had any books)... :-)
Chris Hills
01.iinet.net.au>, David R Brooks <dave...@iinet.net.au> writes
LUXURY!!!
We had to walk 10 mile up hill both ways over broken glass with no shoes
to a public library where we were beaten for asking for books and you
tell the kids these days and they don't believe you :-)
Monty Python have a lot to answer for.
CBFalconer
> 01.iinet.net.au>, David R Brooks <dave...@iinet.net.au> writes
>> Chris Hills wrote:
>>> Richard <nos...@thanks.com> writes
>>[snip]
>>>
>>>> Does nobody read any more?
>>> Yes Nobody reads OK. After he got away from the cyclops.
>>>
>>>> "In my day" I had to buy books and study, "kids theses days"
>>>> have the internet at their finger tips but are still too lazy
>>>> to read.
>>>
>>> How did you study in your day?
>>>
>> Oh, same as everyone: walked 3 miles (up-hill both ways) in
>> driving sleet, no shoes, to the public library (which never had
>> any books)... :-)
>
> LUXURY!!!
>
> We had to walk 10 mile up hill both ways over broken glass with
> no shoes to a public library where we were beaten for asking for
> books and you tell the kids these days and they don't believe
> you :-)
In my case the broken glass was covered with a foot of new snow,
and more was coming down. We were allowed shoes, but they tended
to slip out of the ski harnesses. We avoided the beatings by
simply stealing the books, which we could read by candlelight. For
some reason the wind was always in our face. However the uphill
both ways is common to all. I think we inspired Ecsthel
(spelling?).
Dave Hansen
<cbfal...@yahoo.com> wrote:
[...]
>some reason the wind was always in our face. However the uphill
>both ways is common to all. I think we inspired Ecsthel
>(spelling?).
ITYM Maurits Cornelius (M. C.) Escher
Regards,
-=Dave
--
Change is inevitable, progress is not.