Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss
Quick SBC with 16-bit AD and Ethernet ?
10 views
Skip to first unread message
Dave Nadler
Dec 1, 2011, 3:30:48 PM12/1/11
to
Hi Folks - I'm looking at a quick project that needs:
- 16-bit AD data acquisition,
- Ethernet connectivity
- modest processing requirements (32-bits best)
- ideally contemporary ARM supported by lots of
toolchains RTOS etc.
I'd love to use Actual Fusion (but only 12 bits)
or Cypress PSoC (but no Ethernet).
Quick look around shows lots of 12-bit solutions.
Tern has high res AD but old x86 16-bit CPU.
Don't mind a two-board soluion but looking for
minimal fuss to get something going...
Any favorite tools you can suggest ?
Thanks in advance,
Best Regards, Dave
- 16-bit AD data acquisition,
- Ethernet connectivity
- modest processing requirements (32-bits best)
- ideally contemporary ARM supported by lots of
toolchains RTOS etc.
I'd love to use Actual Fusion (but only 12 bits)
or Cypress PSoC (but no Ethernet).
Quick look around shows lots of 12-bit solutions.
Tern has high res AD but old x86 16-bit CPU.
Don't mind a two-board soluion but looking for
minimal fuss to get something going...
Any favorite tools you can suggest ?
Thanks in advance,
Best Regards, Dave
1 Lucky Texan
Dec 2, 2011, 8:02:18 AM12/2/11
to
'horsepower'. Linux and even romdos available, boot from cflash,
lattice, customizable BIOS, daughter boards (PCIe IIRC), etc.
Mark Borgerson
Dec 2, 2011, 10:38:55 AM12/2/11
to
In article <492976.462.1322771448924.JavaMail.geo-discussion-
forums@vbmh5>, d...@nadler.com says...
16-bit ADCs and ethernet However,they only spec 14.5 Bits noise-free.
Controlling the noise with 16-bit ADCs on the same die
as fast logic is still a problem.
Depending on your speed requirements, you might be OK with
some oversampling and digital filtering.
($5K), but support is good and they have chip-specific headers
for a lot of the ARM chips.
forums@vbmh5>, d...@nadler.com says...
>
> Hi Folks - I'm looking at a quick project that needs:
> - 16-bit AD data acquisition,
> - Ethernet connectivity
> - modest processing requirements (32-bits best)
> - ideally contemporary ARM supported by lots of
> toolchains RTOS etc.
> I'd love to use Actual Fusion (but only 12 bits)
> or Cypress PSoC (but no Ethernet).
> Quick look around shows lots of 12-bit solutions.
> Tern has high res AD but old x86 16-bit CPU.
> Don't mind a two-board soluion but looking for
> minimal fuss to get something going...
The Kinetis M60 series from Freescale has two independent
> Hi Folks - I'm looking at a quick project that needs:
> - 16-bit AD data acquisition,
> - Ethernet connectivity
> - modest processing requirements (32-bits best)
> - ideally contemporary ARM supported by lots of
> toolchains RTOS etc.
> I'd love to use Actual Fusion (but only 12 bits)
> or Cypress PSoC (but no Ethernet).
> Quick look around shows lots of 12-bit solutions.
> Tern has high res AD but old x86 16-bit CPU.
> Don't mind a two-board soluion but looking for
> minimal fuss to get something going...
16-bit ADCs and ethernet However,they only spec 14.5 Bits noise-free.
Controlling the noise with 16-bit ADCs on the same die
as fast logic is still a problem.
Depending on your speed requirements, you might be OK with
some oversampling and digital filtering.
>
> Any favorite tools you can suggest ?
I've been a fan of IAR EWARM for many years. It's expensive
> Any favorite tools you can suggest ?
($5K), but support is good and they have chip-specific headers
for a lot of the ARM chips.
>
> Thanks in advance,
> Best Regards, Dave
Mark Borgerson
> Thanks in advance,
> Best Regards, Dave
0 new messages