Converting a discrete code for GuiDesigner

[BR-101]

I would like to convert a discrete IR code for GuiDesigner, is this
possible?
The command is sent through a iTach
grateful

[Barry Gordon]

I am pretty sure the answer is yes, but what do you mean by convert. What
exactly do you have?

I take it you want to send the proper pattern to an iTach from guiDesigner
to cause it to issue a specific IR code to a specific device. You need to be
able to establish the proper HEX string that the iTach wants to see (it is
documented in the protocol documents at their site) and then you need to
cause guiDesigner to send it out a TCP Port to the address of the iTach.
But the first questions is what do you have ? e.g. a Pronto Hex string
representation of what you want to send?

--
You received this message because you are subscribed to the Google Groups
"CommandFusion" group.
To post to this group, send email to comman...@googlegroups.com.
To unsubscribe from this group, send email to
commandfusio...@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/commandfusion?hl=en.

[Joep van den Aker]

You can use iconvert. It's a tool from Global Caché to convert a hex
(discrete) ir code to a GC code.

http://www.icasa-domotica.nl/webshop/download/iConvert.zip

Best regards,

Joep van den Aker

Op 31 jan. 2012 om 20:16 heeft BR-101 <intel...@hotmail.com> het
volgende geschreven:

[BR-101]

Hello Barry, I need to send a command to switch inputs on a Samsung
TV, something like Input HDMI 1, HDMI 2, Component 2, AV1 these
things. In the area of the Central Remote Pronto commands are discrete
and would like to use it because of the original TV remote control
there is only one button to navigate the different inputs.
Tks

On 31 jan, 17:29, "Barry Gordon" <ba...@the-gordons.net> wrote:
> Tenho a certeza a resposta é sim, mas o que você quer dizer com converter. O que
> exatamente o que você tem?
>
> Acho que você deseja enviar o padrão adequado para uma iTach de guiDesigner
> para causá-lo para emitir um código específico IR para um dispositivo específico. Você precisa ser
> capaz de estabelecer a seqüência adequada HEX que o iTach quer ver (é
> documentados no protocolo de documentos em seu site) e então você precisa
> causa guiDesigner para enviá-lo para fora uma porta TCP para o endereço do iTach.
> Mas a primeira pergunta é o que você tem? por exemplo, uma string Hex Pronto
> representação do que você deseja enviar?
>
>
>
>
>
>
>
> ----- Original Message -----
> De: comman...@googlegroups.com [mailto: comman...@googlegroups.com]
>
> Em nome de BR-101
> Sent: terça-feira, 31 janeiro, 2012 14:16
> Para: CommandFusion
> Assunto: Conversão de um código discreto para GuiDesigner
>
> Gostaria de converter um código discreto IR para GuiDesigner, é este
> possível?
> O comando é enviado através de um iTach
> grato
>
> -
> Você recebeu esta mensagem porque está inscrito no Google Groups
> "CommandFusion" do grupo.
> Para postar neste grupo, envie um e-mail para comman...@googlegroups.com.
> Para sair deste grupo, envie um e-mail para
> commandfusion + unsub...@googlegroups.com.
> Para obter mais opções, visite este grupo emhttp://groups.google.com/group/commandfusion?hl=en.

[BR-101]

Thanks Joep, execute your information right now ... will inform the
result. Tks ....

On 31 jan, 17:31, Joep van den Aker <jvda2...@gmail.com> wrote:
> Você pode usar iConvert. É uma ferramenta a partir de cache global para converter um hexadecimal
> (Discreto) Código de ir a um código de GC.
>
> http://www.icasa-domotica.nl/webshop/download/iConvert.zip
>
> Com os melhores cumprimentos,
>
> Joep van den Aker
>
> Op 31 de janeiro 2012 om 20:16 heeft BR-101 <intelli...@ hotmail.com> het
> volgende geschreven:

>
>
>
>
>
>
>
> > Gostaria de converter um código discreto IR para GuiDesigner, é este

> > Possível?

> > O comando é enviado através de um iTach

> > Grato
>
> > -
> > Você recebeu esta mensagem porque se inscreveu para o Google "CommandFusion" Grupos grupo.

> > Para postar neste grupo, envie um e-mail para comman...@googlegroups.com.
> > Para sair deste grupo, envie um e-mail para commandfusion + unsub...@googlegroups.com.

> > Para mais opções, visite este grupo emhttp://groups.google.com/group/commandfusion?hl=en.

[Scott]

Send me your email address to Scott at Automated Atmospheres dot com and I will send you the discrete codes in global cache format

Sent from my iPhone

[BR-101]

Hello Scott, I need the commands including Samsung TV Input ON / OFF.
Thank you, my e mail is intel...@hotmail.com

On 31 jan, 18:56, Scott <scottahl...@gmail.com> wrote:
> Send me your email address to Scott at Automated Atmospheres dot com and I will send you the discrete codes in global cache format
>
> Sent from my iPhone
>

[Denis]

You are member of the htforum?

I have the samsung discrete code.

Thanks.

Enviado via iPhone

[Carlos A. Casanova]

yes i am a member what should i do ?
tks

Enviado / iPhone

[Denis]

Vou te enviar os códigos discretos no padrão global cache. Mas eles estão no pc do meu trabalho então amanha eu te mando....

Nos já nos falamos antes.... Te pedi uma ajuda no layout.

Um abração.

Enviado via iPhone

[Carlos A. Casanova]

valeu Denis abraçao estou retomando o serviço. abç

Enviado / iPhone

[Renato Ruiz Orozco]

HI, CONVERT THROW ICONVERT ON GLOBAL CACHE, YOU JUST HAVE TO PUT sendir 1:1......and the code, on the botton press in command fusion put a REPEAT DELAY ON THE PROPERTY BOTON, this way you would have the repetition on vol and once you don`t touch the boton it stop increasing.

regards

2012/1/31 BR-101 <intel...@hotmail.com>

--
You received this message because you are subscribed to the Google Groups "CommandFusion" group.
To post to this group, send email to comman...@googlegroups.com.
To unsubscribe from this group, send email to commandfusio...@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/commandfusion?hl=en.

--
Renato Ruiz Orozco
Epidemia Sound Studio
epidemia.s...@gmail.com
Ofna. 55.44.61.18
Cell. 55.16.04.59.77
Base Ball # 181
Col. Country Club, Del. Coyoacán, México, D.F.
©Antes de imprimir este correo, piensa en el medio ambiente.

[Joep van den Aker]

Attached you'll find a guifile with all the discrete codes in Global Caché format, ready to use ;)

For the volume buttons you can set a repeat delay of 25ms at button proporties.

 

Have fun!

Joep

Op 31 januari 2012 20:16 schreef BR-101 <intel...@hotmail.com> het volgende:

[Carlos A. Casanova]

Wow Very Thanked Joep saved me a considerable work, I owe you this and a coke..... Tks again
 

---

Date: Tue, 31 Jan 2012 22:40:38 +0100
Subject: Re: Converting a discrete code for GuiDesigner
From: jvda...@gmail.com
To: comman...@googlegroups.com

[Joep van den Aker]

Youre welcome! Make sure you use the wright ir eye / settings. All the codes in my project are using the first ir eye of an iTach device sendir 1:1

Met vriendelijke groet,

Joep van den Aker

D-Touch Systeemintegratie

www.d-touch.nl

[Denis Renesto]

Carlos,

Sorry for delay.

I'm attaching the file with the discrete codes.

I hope to help you.

Thanks.

2012/2/1 Joep van den Aker <jvda...@gmail.com>

[Kol Johnson]

Thanks for posting these.

---

From: comman...@googlegroups.com [mailto:comman...@googlegroups.com] On Behalf Of Denis Renesto
Sent: Friday, February 10, 2012 5:30 PM
To: comman...@googlegroups.com

[Denis Renesto]

You are welcome.

2012/2/11 Kol Johnson <kol....@cox.net>

[Carlos A. Casanova]

Muito Obrigado Denis ! abç
 

 

---

Date: Sat, 11 Feb 2012 17:40:34 -0200

Subject: Re: Converting a discrete code for GuiDesigner

From: denis....@gmail.com
To: comman...@googlegroups.com