Receiver Onkyo TX NR 708
158 views
Skip to first unread message
Rodrigo Drumond
Mar 12, 2011, 3:59:40 PM3/12/11
to comman...@googlegroups.com
Hello!
i have a Receiver Onkyo TX NR 708, but i don't know the best way to control it.
The TX NR 708 have RS232 and Ethernet, but i do not found any protocol, even in the Onkyo web site
Please, any one can help ?
Thank you!
--
Atenciosamente,
i have a Receiver Onkyo TX NR 708, but i don't know the best way to control it.
The TX NR 708 have RS232 and Ethernet, but i do not found any protocol, even in the Onkyo web site
Please, any one can help ?
Thank you!
--
Atenciosamente,
Rodrigo Drumond
Programador de Sistemas
iKeise® - Tecnologias Integradas
(31) 3377-3150
(31) 8699-2549
Jarrod Bell
Mar 12, 2011, 6:47:54 PM3/12/11
to comman...@googlegroups.com
Search the google Group for onkyo, there have been quite a few posts
which relate to the control over both RS232 and Ethernet.
Jarrod
Jarrod
--
You received this message because you are subscribed to the Google Groups "CommandFusion" group.
To post to this group, send email to comman...@googlegroups.com.
To unsubscribe from this group, send email to commandfusio...@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/commandfusion?hl=en.
Rodrigo Drumond
Mar 13, 2011, 11:15:59 AM3/13/11
to comman...@googlegroups.com
Ok! i found something, but nothing about any protocol RS232 or ethernet
... and the protocol over ethernet is my dream :D
--
Atenciosamente,
... and the protocol over ethernet is my dream :D
--
Atenciosamente,
Rodrigo Drumond
Programador de Sistemas
iKeise® - Tecnologias Integradas
(31) 3377-3150
(31) 8699-2549
Deiby Rojas Montero
Mar 13, 2011, 11:29:05 AM3/13/11
to comman...@googlegroups.com
Hola Rodrigo aqui tengo el protocolo completo.
--
Deiby Rojas Montero
Moncortec S.A.
Tel: 2263.6052
Cel: 8374.5853
--
Deiby Rojas Montero
Moncortec S.A.
Tel: 2263.6052
Cel: 8374.5853
Rodrigo Drumond
Mar 13, 2011, 10:06:42 PM3/13/11
to comman...@googlegroups.com, Nahshon Williams
Thank you Deiby and Nahshon!
My receiver, TX NR 708, is not on your file. (both)
Do you see any problem??
--
Atenciosamente,
My receiver, TX NR 708, is not on your file. (both)
Do you see any problem??
--
Atenciosamente,
Rodrigo Drumond
Programador de Sistemas
iKeise® - Tecnologias Integradas
(31) 3377-3150
(31) 8699-2549
Deiby Rojas Montero
Mar 13, 2011, 10:54:05 PM3/13/11
to comman...@googlegroups.com
I program the 808 is the same instructions
Sent from my iPad
Sent from my iPad
Rodrigo Drumond
Mar 15, 2011, 9:25:39 AM3/15/11
to comman...@googlegroups.com
Deiby!
When i send standby to my receiver with ISCP\x00\x00\x00\x10\x00\x00\x00\x08\x01\x00\x00\x00!1PWR00\x0D
i can't send the power On, because the receiver is out of network (when is in standby!)
what we can do ?
thank you
--
Atenciosamente,
When i send standby to my receiver with ISCP\x00\x00\x00\x10\x00\x00\x00\x08\x01\x00\x00\x00!1PWR00\x0D
i can't send the power On, because the receiver is out of network (when is in standby!)
what we can do ?
thank you
--
Atenciosamente,
Rodrigo Drumond
Programador de Sistemas
iKeise® - Tecnologias Integradas
(31) 3377-3150
(31) 8699-2549
Jarrod Bell
Mar 15, 2011, 9:33:30 AM3/15/11
to comman...@googlegroups.com
There is probably an option in the Onkyo settings menu to have
network enabled in standby.
I know my Denon has this option (Called 'Network Standby > Enabled').
Jarrod
I know my Denon has this option (Called 'Network Standby > Enabled').
Jarrod
Scott Shanafelt
Mar 15, 2011, 10:50:57 AM3/15/11
to comman...@googlegroups.com
Interesting side note to this: I did this with a Kill-a-watt connected to a similar receiver, and with network standby off the device pulled only a couple watts in standby, but with network standby on it pulled about 90 watts. Many receivers do not have separate power supplies for the networking electronics, and it leaves your main power supply running. Serial or IR control generally do NOT do this, and operate at very low current while powered off. Just an FYI.
Scott
Jarrod Bell
Mar 15, 2011, 10:59:38 AM3/15/11
to comman...@googlegroups.com
Yes very good point. This was documented in my Denon manual, so went
with RS232 instead.
Jarrod
Jarrod
Deiby Rojas Montero
Mar 15, 2011, 11:14:36 AM3/15/11
to comman...@googlegroups.com
Enable Standby Mode and Port Settings. Page 67 Manual Onkyo
--
Attach a Example of my project.
Regards
--
Rodrigo Drumond
Mar 15, 2011, 1:11:39 PM3/15/11
to comman...@googlegroups.com
Thank you Deiby!
Evrything work's now
I think my onkyo manual is diferent, don't tell me nothing about Standbye etc etc.
Page 67:
Enable = control over ethernet work all the time
Disable = control over ethernet work only when the receiver is ON
--
Atenciosamente,
Evrything work's now
I think my onkyo manual is diferent, don't tell me nothing about Standbye etc etc.
Page 67:
Enable = control over ethernet work all the time
Disable = control over ethernet work only when the receiver is ON
--
Atenciosamente,
Rodrigo Drumond
Programador de Sistemas
iKeise® - Tecnologias Integradas
(31) 3377-3150
(31) 8699-2549
Reply all
Reply to author
Forward
0 new messages