Comedi Calibrate for 6225

[Bob Apodaca]

I just pulled the current GIT snapshot for comedi calibrate. After I
compile and run, I get:

$ /tmp/comedi_calibrate --calibrate /dev/comedi0
init_setup() failed for pci-6225

I'd appreciate any suggestions.

[Jordi Blanch]

I think you should use comedi_soft_calibrate for the NI M series
boards. At least this is what we are using with the PCI 6229 board and
it is working properly.

--
Jordi Blanch Carles
Unidad de Ensayo y Control

ENCOPIM S.L.
C/. del Parc, 5 (nave 13)
P.I. Els Pinetons
E-08291 RIPOLLET (Barcelona)
Tel: (+34) 935 94 23 47
Fax: (+34) 935 94 64 15

==========================================================
La información contenida en la presente transmisión es confidencial y
su uso únicamente está permitido a su(s) destinatario(s). Si Ud. no es
la persona destinataria de la presente transmisión, rogamos nos lo
comunique de manera inmediata por teléfono (+34 935 942 347) y destruya
cualquier copia de la misma (tanto digitales como en papel).

The information contained in this transmission is confidential and is
intended only for the use of the addressee(s). If you are not the
designated recipient of this transmission, please advise us immediately
by telephone (+34 935 942 347) and destroy any copies (digital and
paper).
======================================================