I bought the hive a cheap shitty harbor freight tig. It needs a power cord
but the price was right. If it ends up getting enough use I'll buy the
space a miller.
On Wed, Oct 17, 2012 at 3:06 PM, Dave B. <blun...@gmail.com> wrote:
> I bought the hive a cheap shitty harbor freight tig. It needs a power
> cord but the price was right. If it ends up getting enough use I'll buy the
> space a miller.
> DaveB
> --
> You received this message because you are subscribed to the Google Groups
> "Hive13 Hackerspace" group.
> To post to this group, send email to cincihackerspace@googlegroups.com.
> To unsubscribe from this group, send email to
> cincihackerspace+unsubscribe@googlegroups.com.
> For more options, visit this group at
> http://groups.google.com/group/cincihackerspace?hl=en.
-- Tiffany R. Bell-Horwath
University of Cincinnati
Chemistry Ph.D Candidate
That's great! Thanks Dave B!
I'm wondering if the officers/membership could recommend *where *in the
hive to weld, either using this fancy new TIG or with the MIG already
there. Dirty room seems like a good idea but it doesn't have a 240 V
outlet (that I know of).
Mike
On Wed, Oct 17, 2012 at 3:12 PM, Tiffany Bell-Horwath <
> On Wed, Oct 17, 2012 at 3:06 PM, Dave B. <blun...@gmail.com> wrote:
>> I bought the hive a cheap shitty harbor freight tig. It needs a power
>> cord but the price was right. If it ends up getting enough use I'll buy the
>> space a miller.
>> DaveB
>> --
>> You received this message because you are subscribed to the Google Groups
>> "Hive13 Hackerspace" group.
>> To post to this group, send email to cincihackerspace@googlegroups.com.
>> To unsubscribe from this group, send email to
>> cincihackerspace+unsubscribe@googlegroups.com.
>> For more options, visit this group at
>> http://groups.google.com/group/cincihackerspace?hl=en.
> --
> Tiffany R. Bell-Horwath
> University of Cincinnati
> Chemistry Ph.D Candidate
> --
> You received this message because you are subscribed to the Google Groups
> "Hive13 Hackerspace" group.
> To post to this group, send email to cincihackerspace@googlegroups.com.
> To unsubscribe from this group, send email to
> cincihackerspace+unsubscribe@googlegroups.com.
> For more options, visit this group at
> http://groups.google.com/group/cincihackerspace?hl=en.
The new TIG is about as fancy as a vine st. hooker except made in China. :)
As for where - there is an area over by the mill / woodshop area that Jon
has setup with some splatter shields and an old table saw top as an
improvised welding table. For small stuff, it works fine. Be mindful of
what's around you and use common sense.
-Dave B.
On Wed, Oct 17, 2012 at 3:33 PM, Michael Horwath <horwa...@mail.uc.edu>wrote:
> That's great! Thanks Dave B!
> I'm wondering if the officers/membership could recommend *where *in the
> hive to weld, either using this fancy new TIG or with the MIG already
> there. Dirty room seems like a good idea but it doesn't have a 240 V
> outlet (that I know of).
> Mike
> On Wed, Oct 17, 2012 at 3:12 PM, Tiffany Bell-Horwath <
> tiffanybel...@gmail.com> wrote:
>> Thats awesome!! :)
>> On Wed, Oct 17, 2012 at 3:06 PM, Dave B. <blun...@gmail.com> wrote:
>>> I bought the hive a cheap shitty harbor freight tig. It needs a power
>>> cord but the price was right. If it ends up getting enough use I'll buy the
>>> space a miller.
>>> DaveB
>>> --
>>> You received this message because you are subscribed to the Google
>>> Groups "Hive13 Hackerspace" group.
>>> To post to this group, send email to cincihackerspace@googlegroups.com.
>>> To unsubscribe from this group, send email to
>>> cincihackerspace+unsubscribe@googlegroups.com.
>>> For more options, visit this group at
>>> http://groups.google.com/group/cincihackerspace?hl=en.
>> --
>> Tiffany R. Bell-Horwath
>> University of Cincinnati
>> Chemistry Ph.D Candidate
>> --
>> You received this message because you are subscribed to the Google Groups
>> "Hive13 Hackerspace" group.
>> To post to this group, send email to cincihackerspace@googlegroups.com.
>> To unsubscribe from this group, send email to
>> cincihackerspace+unsubscribe@googlegroups.com.
>> For more options, visit this group at
>> http://groups.google.com/group/cincihackerspace?hl=en.
> --
> You received this message because you are subscribed to the Google Groups
> "Hive13 Hackerspace" group.
> To post to this group, send email to cincihackerspace@googlegroups.com.
> To unsubscribe from this group, send email to
> cincihackerspace+unsubscribe@googlegroups.com.
> For more options, visit this group at
> http://groups.google.com/group/cincihackerspace?hl=en.
On Wednesday, October 17, 2012 3:33:44 PM UTC-4, Michael Horwath wrote:
> That's great! Thanks Dave B! > I'm wondering if the officers/membership could recommend *where *in the > hive to weld, either using this fancy new TIG or with the MIG already > there. Dirty room seems like a good idea but it doesn't have a 240 V > outlet (that I know of).
> Mike
> On Wed, Oct 17, 2012 at 3:12 PM, Tiffany Bell-Horwath <tiffan...@gmail.com<javascript:> > > wrote:
>> Thats awesome!! :)
>> On Wed, Oct 17, 2012 at 3:06 PM, Dave B. <blu...@gmail.com <javascript:>>wrote:
>>> I bought the hive a cheap shitty harbor freight tig. It needs a power >>> cord but the price was right. If it ends up getting enough use I'll buy the >>> space a miller.
>>> DaveB
>>> -- >>> You received this message because you are subscribed to the Google >>> Groups "Hive13 Hackerspace" group. >>> To post to this group, send email to cincihac...@googlegroups.com<javascript:> >>> . >>> To unsubscribe from this group, send email to >>> cincihackerspa...@googlegroups.com <javascript:>. >>> For more options, visit this group at >>> http://groups.google.com/group/cincihackerspace?hl=en.
>> -- >> Tiffany R. Bell-Horwath >> University of Cincinnati >> Chemistry Ph.D Candidate
>> -- >> You received this message because you are subscribed to the Google Groups >> "Hive13 Hackerspace" group. >> To post to this group, send email to cincihac...@googlegroups.com<javascript:> >> . >> To unsubscribe from this group, send email to >> cincihackerspa...@googlegroups.com <javascript:>. >> For more options, visit this group at >> http://groups.google.com/group/cincihackerspace?hl=en.
On Wed, Oct 17, 2012 at 3:38 PM, Ed Estes <ed.es...@gmail.com> wrote:
> Jon has already started setting up the area next to the woodworking space
> as our "metal shop."
