I was at Makespace last night, one of the things I did was check the doors before the access control system is fitted, I found a couple of issues with two of the doors. The first door is by the library. it needs a couple about 2 mm of of wood removing so the door closer can pull the door shut The second door is the main internal entrance doors, the left hand leaf is rubbing on the floor and needs about 3 mm removing from the bottom so the door can close. Is there anybody who could made the adjustments that each door require.
> I was at Makespace last night, one of the things I did was check the doors
> before the access control system is fitted, I found a couple of issues with
> two of the doors. The first door is by the library. it needs a couple about
> 2 mm of of wood removing so the door closer can pull the door shut The
> second door is the main internal entrance doors, the left hand leaf is
> rubbing on the floor and needs about 3 mm removing from the bottom so the
> door can close. Is there anybody who could made the adjustments that each
> door require.
The doors closers I checked last night, seemed OK. I did adjusted the store room door closer. I will check the other non access control doors and adjust if required, when I am next at Makespace not installing/sorting out any electrics or making.
On Friday, 2 November 2012 07:26:24 UTC, Laura James wrote:
> Good spot Brian. We should get the doors tidied up - great if we can do > that ourselves!
> We may neeed to replace some of the door closers too at some point.
> Laura
> On 2 November 2012 00:27, Brian <brian....@gmail.com <javascript:>> wrote:
>> Hi,
>> I was at Makespace last night, one of the things I did was check the >> doors before the access control system is fitted, I found a couple >> of issues with two of the doors. The first door is by the library. it needs >> a couple about 2 mm of of wood removing so the door closer can pull the >> door shut The second door is the main internal entrance doors, the left >> hand leaf is rubbing on the floor and needs about 3 mm removing from the >> bottom so the door can close. Is there anybody who could made >> the adjustments that each door require.
On Thu, 2012-11-01 at 17:27 -0700, Brian wrote:
> Hi,
> I was at Makespace last night, one of the things I did was check the
> doors before the access control system is fitted, I found a couple
> of issues with two of the doors. The first door is by the library. it
> needs a couple about 2 mm of of wood removing so the door closer can
> pull the door shut The second door is the main
> internal entrance doors, the left hand leaf is rubbing on the floor
> and needs about 3 mm removing from the bottom so the door can close.
> Is there anybody who could made the adjustments that each door
> require.
