Fwd: Cabo Rico 38 rudder

[David Cameron]

-----Original Message-----
From: Bob Walker <bobwa...@aol.com>
To: David Cameron <tc...@aol.com>
Sent: Sat, May 12, 2012 7:22 pm
Subject: Re: Cabo Rico 38 rudder

We can deduct 500 for the rebuild to reuse your shaft. The CR rudders we have taken apart have had large hollow places inside the rudder, low density foam, even hollow PVC pipe inside. The strap coming off the shaft is very flimsy, light weight strapping, like a 16 gauge. We will weld new stainless strapping to the shaft. Please visit out web page www.newrudders.com. There is a nice explanation of our process. 

You are looking at one week to make a new rudder. Since you are on the hard we will fit you in.

Thanks,

Al Walker

Sent from my iPhone

On May 12, 2012, at 5:55 PM, David Cameron <tc...@aol.com> wrote:

Tell me more about the rebuild program,are these rudders poooly constructed?This one is 30 yrs old has no looseness along the shaft no obious cracking along the leading edge or blisters,in my life with boats I,know it is almost impossible to have a dry rudder.I,can bring to old one to you,What will a rebuild entail and cost?Loaded question I,know.Is your new rudder a sold stainless shaft?Is the old one?As i,said before I,live in Stuart can't be that far away from you.Whats your turn around time or If I want a new one how long.Boats on the Hard now.30.00 a day.Please get back to me asap.

Thanks Very Much for your time David Cameron

-----Original Message-----
From: Bob Walker <bobwa...@aol.com>
To: David Cameron <tc...@aol.com>
Sent: Sat, May 12, 2012 11:09 am
Subject: Re: Cabo Rico 38 rudder

The price for a new rudder and steel is 2232.00 plus shipping. We have a rebuild program but the internal steel structure of the CR 38 is so poor that the shaft is all that is reusable. Production time is 2-3 weeks. Thank you for your inquiry.

Al

Sent from my iPhone

On May 11, 2012, at 10:07 PM, David Cameron <tc...@aol.com> wrote:

I,just purchased a CR 38 I,have rusty water coming out of the rudder,Before I,start folling around and wasting money and time How mush is a new rudder?

Thanks for your time David Cameron Stuart Fl