The problem with all of the 320's tanks is that they tend to be wide and shallow. It's

Greetings- We occasionally fly a symmetric spinnaker, and for the sheets use 50 mm Harken blocks soft

So is Reardon involved. I would guess so given the way the release is written. The new website is a

Hi Mark, You may just need an electric heating element. If that element is powered and the hot water

I have measured from the scum line to the underside of the wing keel and it is close to 4'-10”. I

Have you tried it moored at the dock in gear at same revs, is noise still there. If not its the prop

I use my whisker pole when running downwind with my Genoa. I keep the cars well aft and the pole is

They (west M) closed all their stores in Canada a few years back and were missed. Other marine supply

Great timing, Larry! my right-side sink just started leaking badly from the drain. I tightened

Down, toward exhaust and toward water inlet On Sun, Jun 14, 2026, 9:55 PM GREG SUTTON via C320-list

Shipmates- We "race" our boat with a very casual group on Wednesday nites and occasionally

Along the vein of spending now to save big... I bought a really great RIB tender and outboard and a

On a previous boar I discovered two things about those cables. First. they are rated AND very

$1084 ($930 in 2022 for me) complete new NOVA KOOL system with 2 year warranty https://www.

Locks her to keep honest people honest. If somebody wants in your boat, and Locke is not gonna stop

A previous owner had my ignition switch replaced and made a mistake somehow. I discovered that my glo

The reefing system on my boat was non-functioning until I removed the huge birds nest inside the boom

Just curious, which boarding ladder wrung did you shorten? I rarely use the cockpit seat and look

It's is possible to pull the reef system's inside double block out of the rear of the boom

This is apparently a very popular topic. Please send to me as well. Thanks John #919 Mariah Georgian

Amen ..... Dave Hupe 1994 C320 #32 Yahoo Mail: Search, Organize, Conquer On Tue, Jun 2, 2026 at 4:52

I just did a blog post on fitting the Mantus M2 to my 320, if anyone is interested in this style of

I just want to throw this out there. I have an entirely different helm seat installed by a PO. It is

If the insulation is still in good condition, you can reattach it with a spray adhesive. You can pick

Got it done. Thanks all for advice. Not quite as burdensome as expected. Old batteries had handle/

Yes, a real shame. David Nolte Beach House 0004 Severna Park, MD > On May 28, 2026, at 11:48 AM,

I ordered 17 feet when I did mine. I sent you a direct email with specifics Art. Dave Hupe 1994 C320

The line that has to be taught is the Topping Lift. The Dutchman monofilament lines require

I have an extra long line for the topping lift that comes all the way back through an extra clutch on