Hey neighbors! Richard will be coming around again to clean our air vents and dryer vents. He did an

Hi everyone, We're arranging dryer vent and duct cleaning with Shawn and his team. I used him

Just wanted to let you know that me and a few neighbors had our ducts,dryer and Chimney cleaned by

Hello Everyone! We're scheduling a dryer vent cleaning and if anyone else is interested, we can

Hi everyone, We're arranging dryer vent and duct cleaning with Shawn and his team. I used him

Our Bristol 35.5 is anchored in this urban setting, having completed a passage from Brazil, astounded

If you're interested, please PM me your contact info and address, and I'll arrange a

Hi Everyone, I just wanted to pass along that Steve and his team will be in our area again doing

Did you sell these sails? Any chance they are still available? On Saturday, September 3, 2022 at 7:15

Exotic Psyche Phamarceuticals Our mission is to improve safety through harm reduction. The vast

ENJOY OUR SECRET SERVICE ON TELEGRAM NOW 1; Clone cards What is clone cards it is simply a bank card

https://www.dellaria.org/cousins/max-massimo-dellaria-senior/?fbclid=

Here it is, the annual Make a Wish Foundation fundraiser. 100% of your donations are made directly to

All, how is that bulkhead fastened in place? Have you worked/repaired one? I'm wondering what it

Spoke to my mechanic Said its a Hurth /ZF. On Sep 6, 2022, at 10:52 AM, dcneuro dcneuro.net <

I recently purchased a 1985 Bristol 41.1 that had been repowered in 2016 with a Beta Marine 50. The

I bought a replacement cowl on ebay. Do a search and you'll likely find some sources. On Aug 12,

If your steering system is from Edson, take a look at their technical help on their website: https://

Ricardo , I wonder if I could come by and admire your '19? I've never really seen one up

Previous owner installed the same windlass and we have been extremely happy with it. A custom piece

Attached is a photo of my windlass. It is a maxwell horizontal electric windlass. It replaced a

To be honest I've only rowed once or twice. Relying on the 2 hp Honda. Although I did winch it up

Thanks David! I'm going to heed your advice and pull them and see if I can get some help

I have a 60s era 29. And I love this vessel doing some interior work she's mechanically sound and

Thank you!!! I looked at them again and I considered this. I can't find anyone to make them or

I have to agree with a larger cold plate being much more efficient. This summer I had the opportunity

Two documents for replacing fixed ports. 1. Portlight replacement – some additional comments The

David, I've successfully regreased a 1" seacock while the boat was in the water. Use a foam

FYI, this is exactly how my 40 is set up too. On Apr 11, 2021, at 10:42 PM, Mike L <ml460j@gmail.

HAHA found it right before i launched. engine water intake hiding behind the Groco On Mon, Jan 25,