Justin showed me this. It's not going to replace ExpressPCB (I can't use Eagle) but for sharing ideas online, it's great! https://www.circuitlab.com/editor/
chris.hol...@multiedge-net.co.uk> wrote:
> Justin showed me this.
> It's not going to replace ExpressPCB (I can't use Eagle) but for sharing
> ideas online, it's great!
> https://www.circuitlab.com/editor/
> --
> You received this message because you are subscribed to the Google Groups
> "BuildBrighton - the Brighton Hacker Space" group.
> To post to this group, send email to brightonhackerspace@googlegroups.com.
> To unsubscribe from this group, send email to
> brightonhackerspace+unsubscribe@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msg/brightonhackerspace/-/n98SS9wGcO0J.
> For more options, visit https://groups.google.com/groups/opt_out.
This is very similar to the sort of tool that Chris was asking for last
Thursday to simulate a circuit.
Looks very interesting, although it does seem to be a bit temperamental.
On 07/10/2012 22:23, Chris Holden wrote:
> Justin showed me this.
> It's not going to replace ExpressPCB (I can't use Eagle) but for sharing
> ideas online, it's great!
> https://www.circuitlab.com/editor/
Yes I came across that online tool. I did manage to get a circuit drawn and get some voltage readings. Only after using the voltage/current source symbols. It's seems to lack some basic components such as leds and the switches aren't interactive so can't turn on or off circuits when in simulate mode.
Used it to try to understand do I need a diode when switching power circuits between series and parallel states and then apply a charge current to the power source? The tool wasn't able to answer that question. I believe would need one but it would be nice to prove it without doing it in the lab as It could go bang!!
On Sunday, 7 October 2012 22:42:58 UTC+1, SCropp wrote:
> This is very similar to the sort of tool that Chris was asking for last > Thursday to simulate a circuit.
> Looks very interesting, although it does seem to be a bit temperamental.
> On 07/10/2012 22:23, Chris Holden wrote: > > Justin showed me this. > > It's not going to replace ExpressPCB (I can't use Eagle) but for sharing > > ideas online, it's great! > > https://www.circuitlab.com/editor/
> -- > Stephen Cropp > Ste...@Cropp.co.uk <javascript:>
Check it out again, as it must have changed since you last used it. Under
"Diodes", third one across "Light Emitting Diode (LED)". It seems to have
all the common bits, including Pots and both Darlingtons. Perfect for basic
fabrication in my opinion.
- Justin
On Mon, Oct 8, 2012 at 9:02 AM, Christopher Hills <orict...@gmail.com>wrote:
> Yes I came across that online tool. I did manage to get a circuit drawn
> and get some voltage readings. Only after using the voltage/current source
> symbols. It's seems to lack some basic components such as leds and the
> switches aren't interactive so can't turn on or off circuits when in
> simulate mode.
> Used it to try to understand do I need a diode when switching power
> circuits between series and parallel states and then apply a charge current
> to the power source?
> The tool wasn't able to answer that question. I believe would need one but
> it would be nice to prove it without doing it in the lab as It could go
> bang!!
> On Sunday, 7 October 2012 22:42:58 UTC+1, SCropp wrote:
>> This is very similar to the sort of tool that Chris was asking for last
>> Thursday to simulate a circuit.
>> Looks very interesting, although it does seem to be a bit temperamental.
> --
> You received this message because you are subscribed to the Google Groups
> "BuildBrighton - the Brighton Hacker Space" group.
> To post to this group, send email to brightonhackerspace@googlegroups.com.
> To unsubscribe from this group, send email to
> brightonhackerspace+unsubscribe@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msg/brightonhackerspace/-/_89xQ0jBZZ8J.
On Monday, 8 October 2012 09:10:40 UTC+1, Justin Nel wrote:
> Check it out again, as it must have changed since you last used it. Under > "Diodes", third one across "Light Emitting Diode (LED)". It seems to have > all the common bits, including Pots and both Darlingtons. Perfect for basic > fabrication in my opinion.
> - Justin
> On Mon, Oct 8, 2012 at 9:02 AM, Christopher Hills <oric...@gmail.com<javascript:> > > wrote:
>> Yes I came across that online tool. I did manage to get a circuit drawn >> and get some voltage readings. Only after using the voltage/current source >> symbols. It's seems to lack some basic components such as leds and the >> switches aren't interactive so can't turn on or off circuits when in >> simulate mode.
>> Used it to try to understand do I need a diode when switching power >> circuits between series and parallel states and then apply a charge current >> to the power source? >> The tool wasn't able to answer that question. I believe would need one >> but it would be nice to prove it without doing it in the lab as It could go >> bang!!
>> On Sunday, 7 October 2012 22:42:58 UTC+1, SCropp wrote:
>>> This is very similar to the sort of tool that Chris was asking for last >>> Thursday to simulate a circuit.
>>> Looks very interesting, although it does seem to be a bit temperamental.
>> -- >> You received this message because you are subscribed to the Google Groups >> "BuildBrighton - the Brighton Hacker Space" group. >> To post to this group, send email to brightonh...@googlegroups.com<javascript:> >> . >> To unsubscribe from this group, send email to >> brightonhackerspace+unsubscribe@googlegroups.com <javascript:>. >> To view this discussion on the web visit >> https://groups.google.com/d/msg/brightonhackerspace/-/_89xQ0jBZZ8J.
